Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishes - Marcs Shootout

Featured Replies

GF does make a water based product with a higher ratio of urethane resin.  they call it "enduro clear" but is part of their commercial line and usually only carried by commercial suppliers. 

I'm curious if just mixing regular Minwax with mineral spirits would give similar results to their "wiping varnish"... seems it would certainly be cheaper.

 

I'm curious if just mixing regular Minwax with mineral spirits would give similar results to their "wiping varnish"... seems it would certainly be cheaper.

 

Honestly, that's what I do. GF products aren't available locally, and Minwax is everywhere. Thin as you go, though. Home-brew doesn't seem to have much shelf life, in my limited experience.

6 hours ago, Minnesota Steve said:

I'm curious if just mixing regular Minwax with mineral spirits would give similar results to their "wiping varnish"... seems it would certainly be cheaper.

 

Similar but not same.  I have no idea what Minwax and GF add to their formulas to make them better both in appearance and workability...but there's something extra in there that changes them.  I've tried the home-brew before, and it was...meh.

Honestly the savings aren't that great.

  • 1 month later...
On 6/3/2017 at 10:09 AM, Pug said:

Both of my "go to" finishes are poly - minwax wipe on satin (oil), and general finished high performance poly (water).

I have used many others (lacquer, true oils, shellac, etc) but find the ones I mentioned above have an excellent balance of ease of application, availability, and durability.

I'm considering the HP water based (which I've also read to be acrylic.)  What did you brush it with, and did you thin it at all?  GF sells an "Extender"; any clue what it is?  Did you use a "sanding sealer" (or thinned top coat) first?

7 hours ago, Pondhockey said:

I'm considering the HP water based (which I've also read to be acrylic.)  What did you brush it with, and did you thin it at all?  GF sells an "Extender"; any clue what it is?  Did you use a "sanding sealer" (or thinned top coat) first?

I most often spray it using an earlex hvlp system. I have brushed it on, and I normally just use a disposable foam brush (which means some sanding between coats).

I don't use dedicated sanding sealers, as they are mostly designed for production environments. I rely on my first coat to seal, which it certainly does.

I have never put an additive into HP poly, there really is no need. It goes on well, and is forgiving. Similarly, I have never felt the need to thin it out either, even when spraying.

Just get yourself a can, and do a bit of practice on a scrap or shop project. Once you get a feel for it, your confidence will be much higher.

  • 2 weeks later...
On 6/2/2017 at 4:31 PM, Mike. said:

Its not Mattias' cheap projects that bother me.  It is his sanctimonious attitude.  And he took a potshot at @thewoodwhisperer, so he is persona non grata in my book.  

As a software engineer, I interact with people like Matthias on a constant basis--people who are very analytical and 'show me the data' types. It comes off as sanctimonious to most folks... and on some level I guess it really is. Never has bothered me, though, as I just accept that is how people like that function and it's not personal. 

He took a potshot at Marc? When did that happen? 

Don't get me wrong, I'm not giving people like that a free pass. I don't go out of my way to hang out with those folks... mainly because they ARE jerks. I just understand that it's not personal so I don't take it as such. There's a reason people like that often stay single and don't have many friends, though.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.