Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bottle opener

Featured Replies

  • Popular Post

 

I chose to spend the day woodworking today and (in addition to working on a shelving unit for our board games) made a magnetic bottle opener for fun! The initial glue up of scraps was done a couple weeks ago and I wasn't sure what to do with it then. It's alder, walnut, and maple.

 

 

7461df79b9b6c6b0bf4cc53685d06a73.jpg

 

Time to turn the planer blades around... getting chip out no matter which way I run the board.

 

d8cb0442637fc18f8c3acb695f8c7044.jpg

 

Chamfered the edges on the front side. Drilled out and epoxied in a couple magnets to catch the bottle caps.

 

8b3102ea5246a57104c6301e3ab04f4f.jpg

 

Predrilled for the opener and started applying a couple coats of ARS.

 

e8e5769dfc18aaf12de7d5c38c4f246d.jpg

 

f375590a0305f681b983e0555a13fc77.jpg

 

Works like a charm!

 

e1a090b91b37af9eb04b9e70da07fc01.jpg

 

 

It's going up on my new Etsy store for now. Hopefully someone wants it. These things are easy enough to make I could crank a few of them out in a day, no problem.

 

So the magnet is on the back side? How thick is the wood from the front to the magnet? Did it really catch the cap or is that a photo op? Cool piece, regardless. 

  • Author
So the magnet is on the back side? How thick is the wood from the front to the magnet? Did it really catch the cap or is that a photo op? Cool piece, regardless. 

It actually catches the cap. It's drilled out on the back. The wood is just over 3/4" thick. There's about 1/8" of wood left between the magnet and the front. Bought some neodymium magnets off of Amazon and used them. They've got 17lbs of pull at the surface of the magnet so they're pretty strong.

Oooooh, A Cleveland Browns Bottle Opener!   More useful than the actual Browns I must say.  

After 1/8 distance the pull force would be reduced to about 3 lbs from 17. Still plenty to grab a falling cap. And not so strong that it would be a struggle to get the cap off the board to put it in the trash.

K&J Magnetics has pull force graphs for strength vs distance. Strength falls off rapidly. At 5/16 distance it's down to 1.5 lbs, at a 1/2" it's below .5 lbs pull. Practice drilling for the magnet as close to the surface as you can (on scrap) before you drill the actual part.

  • Author

I just keep drilling it a bit more and testing it until the cap was reliably grabbed each time. I had a stop set on the drill press so it didn't go deeper than I wanted it to.

  • Author
That is very cool.  Looks nice.

Thanks! These little things are a great way to get rid of scrap. I made a couple small cheese boards, too.

d2429d3e1d2173f9795d68a3cdd564e7.jpg

I wish the grain lined up better on the cheese boards but the result is to be expected with scraps, I guess.

Looks like pretty nice scrap to me.  I have some cherry,maple and walnut scraps in the shop I think the cheese boards would make great gifts.  What finish do you use on them?

I've got a stack of 5/4 African Mahogany scraps about a foot long you can have but the freight to Maine might be $$.

Its a matter of what do I do with it and where would I keep it on top of could I find it or even remember I've got it ?

  • Author
Looks like pretty nice scrap to me.  I have some cherry,maple and walnut scraps in the shop I think the cheese boards would make great gifts.  What finish do you use on them?

It's an orange oil and beeswax combo. Could also use just plain old mineral oil.

I've got a stack of 5/4 African Mahogany scraps about a foot long you can have but the freight to Maine might be $$.

Its a matter of what do I do with it and where would I keep it on top of could I find it or even remember I've got it ?

You're in Maine?

Magnetic bottle openers are handy as hell, I use big magnets in mine so it'll hold enough for at least one night of drinking haha.  

IMG_3439.thumb.JPG.18e18963d4d468ff0de8739425badc84.JPG

  • Author
Magnetic bottle openers are handy as hell, I use big magnets in mine so it'll hold enough for at least one night of drinking haha.  

IMG_3439.thumb.JPG.18e18963d4d468ff0de8739425badc84.JPG

Which ones do you use?

  • Author
10 hours ago, wdwerker said:

He was commenting on the size and quality of your scraps ....

There's a joke in there somewhere, I know it.

1.5x.25", getting apart two of them that get stuck together is damn near impossible, but they usually will hold enough magnets to where you'll end up knocking them off when you use the opener after awhile.

  • Author

Very nice. Just get them from Amazon? I got a six pack of the 1.26"x1/8" ones and had to use two stuck together to get the pulling power I needed. Next time I'll order the 1/4" ones.

K& J magnetics has instructions on how to separate powerful magnets. You build a jig to do it. Lots of info on their website.

http://www.kjmagnetics.com/blog.asp?p=separating-magnets

Their prices are a bit higher but the quality and selection are the absolute best. A lot of the cheaper magnets out there are poorly plated, easier to crack and chip and not as powerful for the size. N42 rated are weaker, N52 are more powerful.

  • 1 month later...

Its really nice. You should be able to get yourself at least 1/16" from the front of the opener.  I would also recommend using a metal washer to place on the back of the magnet before you epoxy.  Will increase the strength of the magnet, by focusing the magnets strength more towards the front.  To hold even more caps rout a path in the back and glue down 2-3 magnets equally spaced on a piece of metal and epoxy that in.  That should hold a parties worth of caps.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.