Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

ARS

Featured Replies

Had a family emergency which threw me behind completing 5 cremation boxes which have to be delivered Thursday. I'm finishing with ARS. How long between coats do you wait as a general rule. Can doesn't say. Dry time, which I assume is cure time is 12-24 hours. This is my first time using ARS as I figured it was a major upgrade from Minwax :) 

Thanks. 

No definetive answer. The first coat soaks in more and will be ready to sand in less time than subsequent coats.  I would have a piece of scrap of the same wood, sanded the same way.  Put a coat on the scrapat the sme time you put a coat on the project and test the scrap piece it when you think it might be dry enough to sand for the next coat.  Short of that I make sure that it does not feel tacky or cool and that the sand paper produces white dry powder.  A lot depends on the thickness of each coat.

I've found that low humidity makes a world of difference. You might be able to get two coats on in one day, one early and one late, if you can sneak it into the spare bedroom without mamma knowing about it. Otherwise, one coat per 24 hours or more. And yeah, Ronn is correct about the thickness. First coat ok with a foam brush and the rest, wipe on.

Put a fan on it & it'll cure much, much faster. Might want to wait until it's not tacky to do that to avoid having dust stick to it.

Put the same amount of coats on a scrap piece as you go along. If your sand paper is gumming up on the test piece then you're too early. Air movement, low humidity, and heat will accelerate the drying. Maybe not by much, but it's worth the try.

Let the all-knowing sandpaper give you guidance.;)

14 hours ago, prov163 said:

Had a family emergency which threw me behind completing 5 cremation boxes which have to be delivered Thursday. I'm finishing with ARS. How long between coats do you wait as a general rule. Can doesn't say. Dry time, which I assume is cure time is 12-24 hours. This is my first time using ARS as I figured it was a major upgrade from Minwax :) 

Thanks. 

Pretty much the same stuff, different can.  There might be slight differences but the are both wipe on polyurethane varnishes and, big picture, will behave the same. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.