Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Live Edge Crap??

Featured Replies

Decided to try some live edge type material - serving tray? small table?  Went to a place that does a lot of slabs out of "urban salvaged" local wood.  I have bought some guitar blanks and rifle stock blanks that didn't quite make grade with good success.  Wandered around and found some live edge shorts - loaded up the car for $1 a pound.  Was feeling good until started to take off the bark and surfacing the wood.  Started to get into bug holes, splits, cracks, and a lot of rotten soft punkish wood.  Figured could find something salvagable but the more I planed, cut and worked the worse it got.  Now have a small pile of strips I was able to salvage.

How do you pick out live edge lumber to make sure it isn't garbage?  

IMG_4299.JPG

IMG_4300.JPG

IMG_4301.JPG

Well, 

1.  Now you know some things to look for when evaluating a slab,

2.  Consider going right to the mill - and there are a lot of local, small mills around the NorthWest.

(3.  I happen to tolerate bug holes and a few things like that, that I leave as is or fill with epoxy; some folks use the voids to be creative with fill.)

Kind of comes with the territory.  Any yahoo with a bandsaw mill can slab out a log, and it's gonna come with all the warts.  Either adjust your expectations and embrace the "rustic" element, or forget live edge and go back to buying quality FAS lumber.  That's not to say that some slabs aren't better than others...we have some very clean ones come through from time to time.  But generally you'll have to deal with a certain amount of defect since you're buying the whole kit n' caboodle rather than only the premium parts of the log.  And a lot of the appeal of working with slabs is all the "character."  Using a perfectly clean slab kind of goes against the whole purpose of the style IMO.

No matter what I would want kiln dried slabs so I knew they were dry enough to work with and didn't have bug infestations, and I would avoid slabs with a lot of pith unless you're planning to break it down into parts.

My local home Depot is now selling PINE slabs, and they are predilled with pocket holes. *Facepalm*

1 hour ago, rodger. said:

My local home Depot is now selling PINE slabs, and they are predilled with pocket holes. *Facepalm*

Errrrr.... wut?   Sticky mess anyone?     And predrilled??  What if you don't want the holes there??

  • Author
  • Popular Post

Well I chopped up all the bad live edge, went through the scrap bin, face glued anything long enough, edge glued anything that wasn't - couple of trips through the planer and drum sander, sized and resawn. Hard maple blocks around the edges.  Walnut, Purple Heart, Lacewood, Cherry,Maple  couple of other odd balls, randomly mixed. All endgrain, 1-3/8" thick.  Need to sand and oil - but may be my favorite cutting board yet.  Was able to get two out of the lumber.  So $20 crap wood, pile of scrap wood, and $5 glue turned into a couple of nice christmas gifts......

 

7 hours ago, SCPDX said:

Well I chopped up all the bad live edge, went through the scrap bin, face glued anything long enough, edge glued anything that wasn't - couple of trips through the planer and drum sander, sized and resawn. Hard maple blocks around the edges.  Walnut, Purple Heart, Lacewood, Cherry,Maple  couple of other odd balls, randomly mixed. All endgrain, 1-3/8" thick.  Need to sand and oil - but may be my favorite cutting board yet.  Was able to get two out of the lumber.  So $20 crap wood, pile of scrap wood, and $5 glue turned into a couple of nice christmas gifts......

 

Christmas, yikes!

  • 2 weeks later...
  • Author
  • Popular Post

Got around to finishing a couple of cutting boards out of the downfall - I think they turned out OK.  I have started rifling through the garbage pile looking for more scraps.  Figure one man's garbage is anothers gold.

IMG_4769.thumb.JPG.47f25fd8deb33c8a631f7c663397e79e.JPG

On 9/5/2017 at 9:15 AM, SCPDX said:

How do you pick out live edge lumber to make sure it isn't garbage?  

Comes with experience. Some tips are to use kiln dried material unless you can trust the supplier that it was air dried properly. Moisture meters on slabs are risky at best. The edge of the board will be drier than the middle. Best to flatten the slab, sticker it, let it sit around for a week or so to see if it moved. If not, screw some metal legs on and profit.

On 9/5/2017 at 5:37 PM, rodger. said:

My local home Depot is now selling PINE slabs, and they are predilled with pocket holes. *Facepalm*

I would think you'd want to match that up with the black iron pipe fittings they're now selling at home depot specifically for furniture projects.

http://pipe-decor.com/about-us/

2 minutes ago, Minnesota Steve said:

I would think you'd want to match that up with the black iron pipe fittings they're now selling at home depot specifically for furniture projects.

http://pipe-decor.com/about-us/

I have a friend that sells that type of furniture. Kills it on Etsy 

2 minutes ago, Llama said:

I have a friend that sells that type of furniture. Kills it on Etsy 

I just thought it funny to see black pipe marketed for furniture.   Basically it was the same pieces from the plumbing aisle marked up 50% because it came in special packaging.  Just funny how style trends make their way into retail like that.

 

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.