Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing walnut

Featured Replies

I am building this bed out of walnut and my wife wants a hand applied finished Vs poly etc..  I am not very sophisticated in my finishing experience.   Do not have spray equipment.

1.  Do I need to fill the pores?

2.  Can I use a premade finish like Danish oil?

Thanks.

Brian

 

I would go with Arm-R-Seal by General finishes.  It's a wiping varnish. It is wasy to use, Wipe on and wipe off.  Thin coats. It accentuates to walnut grain and it is durable.  No need for any filler.  Expect to do 3 coats minium.  Comes in Satin, semi gloss and High gloss. I recommend the Satin.  Be sure to do a practice piece first.  including wiping the stuff from inside corners. The Wood Whisperer has a vidieo on in and you can find others on You Tube.  The nice thing about wipe on - wiipe off and thin coats is that you will not have any runs.

No filler.  Danish oil has poly in it.

If you really don't want a film finish, BLO makes walnut beautiful.  But it offers zero protection and it's not a maintenance-free finish...you'll have to reapply from time to time.  PITA.  ARS satin has a natural look but offers a very light protective film...and it's "one and done."  No maintenance required.

Filler is not necessary. Use Arm-R-Seal or Minwax wipe-on poly. Use a t-shirt rag dampened with mineral spirits, then soaked with the finish. Squeeze out enough that it doesn't drip, and wipe it on. Coat again when dry to touch. Let coat 2 dry a good 8 hrs, then lightly (but thoroughly) sand with 320 grit. Clean the dust and coat again. I usually stop there and buff with brown paper after drying another day. I also prefer to build the finish with gloss, then use a final coat of satin if the shine is too much after the paper buffing.

 

If the underlying surface was properly prepared, this yeilds a silky-smooth finish.

 

An even silkier finish can be had by flooding on Danish Oil, and wrt-sanding with 400-600 grit, then wiping back the excess. But this takes 4-6 coats to get any noticable film, and as others have said, it isn't very durable.

 

Boiled Linseed Oil (BLO) gives beautiful color to walnut, but stinks (IMO) and takes forever to fully cure. On something that sees little wear, it seems to hold up ok, though.

thanks guys.

Brian

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.