Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Filling brad nail holes

Featured Replies

Hi all, I'm about to do the finishing on this tool chest and wondering the best process/product to fill the brad nail holes in the walnut trim. I plan on doing a finish found in FineWW'ing of a 50/50 mix of shellac and denatured alcohol finished with wax. Should I use a filler that doesn't harden like Minwax wood putty or one that does harden like DAP plastic wood...or something else?

Thanks.

I use the Minwax blend pencils.  What ever you use its best to test it on scrap first.

What are these "brad nail holes" you speak of?  Like in baseboard?  A dab of caulk oughta do it. :)

All depends on how you are going to finish it. If just a clear finish using a soft putty after finishing gives you the best chance to mix & color match to the wood. If you want to sand and have the holes flush & smooth then timbermate or Famowood's water based filler are also good. The filler under the finish/stain will look different. Try some stain/ finish over filled & sanded nail holes in scrap to determine which color of filler to use.

51 minutes ago, Eric. said:

What are these "brad nail holes" you speak of?  Like in baseboard?  A dab of caulk oughta do it. :)

 

2 hours ago, LazarusDB said:

Hi all, I'm about to do the finishing on this tool chest and wondering the best process/product to fill the brad nail holes in the walnut trim. I plan on doing a finish found in FineWW'ing of a 50/50 mix of shellac and denatured alcohol finished with wax. Should I use a filler that doesn't harden like Minwax wood putty or one that does harden like DAP plastic wood...or something else?

Thanks.

I'll add to Eric's point:  I used some brads for trim in some of my early projects, but I've since learned that there's almost never a need for it.  Blue tape is plenty of clamping pressure, or dovetail keys if you're dealing with a case side where you need to account for movement.  If you absolutely HAVE to use a nail of some kind, use a 23gauge pin (but first re-read the previous sentence).  You did a very nice job here, just remember for the future :)

But to be slightly more helpful to the question at hand, I would use timbermate if I found myself in your shoes.  

If you move to a 23 gauge micropin gun the hole is so tiny that sawdust fills it. A drop of super glue keeps the dust in place. A light sanding then finish . Always test a procedure like this one scrap  before doing it on a project !

wdwerker's got you covered.  Of course the correct answer is to NOT use brad nails outside the floor trim, kitchen or bath areas.  That being said, wax fillers after finishing would be my choice if I were faced with the problem.

I'll stand there and hold the damn thing in place until the glue sets if I have to.  That's what I did for the skirt molding on my blanket chest.  Put on Stairway to Heaven and by the time it's over you can let go of it and it'll be fine.  Put in perspective, losing an hour or two to standing and listening to music is well worth not having to see nail holes in my furniture for the rest of my life.

In this case...eh, maybe not such a big deal because it's a tool chest.  But ordinarily...this is the kind of thing that separates good furniture from great furniture.

2 hours ago, Eric. said:

I'll stand there and hold the damn thing in place until the glue sets if I have to.  That's what I did for the skirt molding on my blanket chest.  Put on Stairway to Heaven and by the time it's over you can let go of it and it'll be fine.  Put in perspective, losing an hour or two to standing and listening to music is well worth not having to see nail holes in my furniture for the rest of my life.

In this case...eh, maybe not such a big deal because it's a tool chest.  But ordinarily...this is the kind of thing that separates good furniture from great furniture.

Haha - I can totally picture Eric standing there holding the pieces until the glue sets up!

Dap Rapid Fuse glue has changed the way I do lots of things. It's a modified super glue made for wood that lets you reposition the part for about 3-5 minutes. It's slightly thickened so it doesn't run. Tip lays down a nice little bead. After 10 minutes I had to beat the hell out of a part I put in upside down to get it loose. A tiny bead under a molding will stay put in 4-5 minutes, leave it alone for 10 minutes and go right back to work. 

Its great for gluing up a tricky sub assembly, let it sit 10 minutes and then glue up the rest of the job with regular yellow glue where the longer open time lets you get all the joints just right.

$10 for a 4 oz bottle. I get it at my local Lowes

 It's all I use on small commercial production runs. After an hour I'm running the shelf's through the drum sander and starting to laminate them.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.