Popular Post LazarusDB Posted September 6, 2017 Popular Post Report Posted September 6, 2017 Some of you may have seen a recent review I wrote on my new table saw, Grizzly G1023RLW. So not wanting to make just any project with my new table saw I went scouring through my ww'ing magazines and found the Tool Chest in the Woodsmith Magazine, issue 200, and thought it the perfect project to break in the new saw. The plan calls for Fir but I decided on black walnut and cherry so I headed to Highland Hardwoods and bought some rough boards. I certainly do love watching the transformation of boards as they go into the planer and come out the other side. I'm using cherry as the main box so laid that out and number the pieces to keep them in order. The plan calls for simply nailing the box together and nailing the bottom on but I decided to cut rabbets. I also used select pine for the bottom. 3 Quote
Popular Post LazarusDB Posted September 6, 2017 Author Popular Post Report Posted September 6, 2017 I then assembled the box using brads to hold it together while I drilled for and installed walnut dowels. Next up was to start trimming out the box with the black walnut. The plan called for putting a chamfer on the bottom, knowing that it will see some abuse, but I decided on a subtle 1/8" roundover. Next up was to create some custom molding. TIP: Always make more than you need...lesson learned. The molding uses a 1/2" cove bit, 1/8" roundover bit and some hand sanding. 4 Quote
Popular Post LazarusDB Posted September 6, 2017 Author Popular Post Report Posted September 6, 2017 Next up is to start on the lid...black walnut rails and stiles with a cherry panel. Hope to get the panel completed tonight. 6 Quote
Popular Post LazarusDB Posted September 8, 2017 Author Popular Post Report Posted September 8, 2017 It took longer than it should (work keeps getting in the way) but got the panel cut last night. Need to do a little clean up then I'll put it all together. 4 Quote
treeslayer Posted September 9, 2017 Report Posted September 9, 2017 Thats gonna really pop with some finish on it, nice work! Quote
estesbubba Posted September 9, 2017 Report Posted September 9, 2017 Looking good! If you like dowel joinery look into Miller Dowels. 1 Quote
Popular Post LazarusDB Posted September 11, 2017 Author Popular Post Report Posted September 11, 2017 Tough weekend with this lid. I lost count of how many times I had to remake a part. Need to put the hinges on and lots of touch up sanding. 3 Quote
bushwacked Posted September 11, 2017 Report Posted September 11, 2017 great looking first project for the new TS! Enjoying it so far? Quote
LazarusDB Posted September 11, 2017 Author Report Posted September 11, 2017 2 hours ago, bushwacked said: great looking first project for the new TS! Enjoying it so far? I sure am. The quality of the cuts, more quiet, the precision...all amazing. I even find myself swapping between crosscut and ripping blades, something I hardly did before, because it's so effortless compared to my old saw. This is probably going to sound goofy but it makes me want to be a better woodworking and produce projects like I never have before. Quote
LazarusDB Posted September 18, 2017 Author Report Posted September 18, 2017 This weekend I was able to do the final sanding and apply three coats of 50/50 dewaxed shellac and denatured alcohol finished with a coat of wax. Got this finish from an article in Fine Woodworking magazine. Just need to install a handle to each side which should be done by end of the week. It's been a tough decision on what style handle to use. This is the chest after the first coat... 2 Quote
Chet Posted September 18, 2017 Report Posted September 18, 2017 I know it is just sort of regular looking but a handle like this has the advantage of being flat against the chest when not in use and when in use it only goes to 90 degrees so it doesn't pinch you hand against the chest in the lifting process. Quote
LazarusDB Posted September 18, 2017 Author Report Posted September 18, 2017 Yes, I looked at those Chet (in black) but felt the style was too "utility" looking compared to the chest. Thanks for the suggestion. I did find some today I think will be perfect and they should arrive Wednesday. Cheers. Quote
Popular Post LazarusDB Posted September 21, 2017 Author Popular Post Report Posted September 21, 2017 Finished! The handles were the finishing touch. I can point out a dozen things wrong with it but I think it's the nicest piece I've built yet...until the next project. I learned many new things while building this and that was really the point of choosing this project so it's a win/win all around. I haven't decided if I'm going to build a till for it yet because my wife may confiscate it she loves it so much. Perfect inaugural project for my new table saw. 6 Quote
estesbubba Posted September 21, 2017 Report Posted September 21, 2017 Yeah that turned out great! Quote
wtnhighlander Posted September 21, 2017 Report Posted September 21, 2017 Love it! Handles look good, do yhe lock at 90* like the brass ones you posted? Quote
LazarusDB Posted September 21, 2017 Author Report Posted September 21, 2017 1 hour ago, wtnhighlander said: Love it! Handles look good, do yhe lock at 90* like the brass ones you posted? No, they don't lock but not worried about it. At this point, the chest is sitting on our dining table while my wife tries to figure out where she wants it. 1 Quote
treeslayer Posted September 21, 2017 Report Posted September 21, 2017 10 hours ago, LazarusDB said: I can point out a dozen things wrong with it but I think it's the nicest piece I've built yet...until the next project. Great looking piece @LazarusDB, we all strive to do the next project better than the last one, if i wasn't getting better at woodworking i think i would quit and go bowling. more tools, different woods, more complicated ect. ect. keep up the great work and be sure to keep us posted on future projects, well done sir! 2 Quote
Eric. Posted September 21, 2017 Report Posted September 21, 2017 4 hours ago, LazarusDB said: the chest is sitting on our dining table while my wife tries to figure out where she wants it. It might be providence that your wife has seized it. It's only my opinion...but I think tool cabinets are more practical in a stationary shop. They're on the wall so you don't have to bend over, they don't take up precious floor space, and tools aren't stuffed in and piled on top of each other so you don't have to dig for them. Tool chests are kind of relics from olden times when carpenters had to move their tools from project to project. We don't really need portability since we don't leave our garages. Some good skills acquired in the chest...but you still need tool storage...maybe tackle a cabinet next? Quote
..Kev Posted September 21, 2017 Report Posted September 21, 2017 Very nice job! Hope you get many years of enjoyment out of it! Quote
Coop Posted September 22, 2017 Report Posted September 22, 2017 I bet the wife beats you out of it for a blanket chest. Great job man! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.