Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Question on Marcs Torsion Top table

Featured Replies

In the videos he builds the top first then the bottom. Why?

He still had to shim up the saw horses and all the to get it level and also mill up some 2x4s ... would building the base first cut down on some of this? Or no?

  • Popular Post

I have built a couple most recently I finished an outfeed table, a couple weeks back, and I would say you still want to build the top on saw horses with shims. If you really want it to be flat (feeler gauge flat) you need it to be very well supported across both length and width dimensions. Once its glued up it will stay flat even if its only supported in the 4 corners as mine below is.

IMG_2349.jpg.e8b6efe2611b52e8b4307b6eac855045.jpg

 

My outfeed table is also a torsion box just not as extensive in its construction.  When the top was finished I flipped it over and used that to build the skeleton of the base on, when I was done with that I flipped it over, mounted the top and now had that to use as an outfeed table and work surface to finish the guts of the project.

I built the torsion box top on top of my lower part. I just locked it in place and made sure it was level in all directions. It worked out fine. I'm not sure it matters that much. Level and flat is level.

  • Author
15 hours ago, pkinneb said:

I have built a couple most recently I finished an outfeed table, a couple weeks back, and I would say you still want to build the top on saw horses with shims. If you really want it to be flat (feeler gauge flat) you need it to be very well supported across both length and width dimensions. Once its glued up it will stay flat even if its only supported in the 4 corners as mine below is.

IMG_2349.jpg.e8b6efe2611b52e8b4307b6eac855045.jpg

 

 

Very nice!! Did a journal go with that build? I need to go find it if it did. Great looking table there! What is the black top? I guess I can always go with the saw horse idea since my outfeed table is nowhere near flat since it is a warped door at the moment lol  

 

15 hours ago, Chet said:

My outfeed table is also a torsion box just not as extensive in its construction.  When the top was finished I flipped it over and used that to build the skeleton of the base on, when I was done with that I flipped it over, mounted the top and now had that to use as an outfeed table and work surface to finish the guts of the project.

Gotcha! Makes sense. 

10 hours ago, Cliff said:

I built the torsion box top on top of my lower part. I just locked it in place and made sure it was level in all directions. It worked out fine. I'm not sure it matters that much. Level and flat is level.

Makes sense. That why I was curious if it did matter as long as you got everything shimmed level. 

 

 

Another question ...

For those using saw horses did you build your own? If so what plans did you follow? Would it be easier to buy some for this? 

16 hours ago, pkinneb said:

I have built a couple most recently I finished an outfeed table, a couple weeks back, and I would say you still want to build the top on saw horses with shims. If you really want it to be flat (feeler gauge flat) you need it to be very well supported across both length and width dimensions. Once its glued up it will stay flat even if its only supported in the 4 corners as mine below is.

IMG_2349.jpg.e8b6efe2611b52e8b4307b6eac855045.jpg

 

Now that's a sharp looking outfeed table!  I wish I could find a 2 thumbs up emoji.

30 minutes ago, bushwacked said:

Another question ...

For those using saw horses did you build your own? If so what plans did you follow? Would it be easier to buy some for this? 

I use plastic sawhorses from Keter. Not the best ones available but they are light, easy to carry and drop on the back of my truck, and they demand little storage space.

2 hours ago, Immortan D said:

I use plastic sawhorses from Keter. Not the best ones available but they are light, easy to carry and drop on the back of my truck, and they demand little storage space.

Different brand but similar.

4 hours ago, bushwacked said:

 

...Very nice!! Did a journal go with that build? I need to go find it if it did. Great looking table there! What is the black top?...

Another question ...

For those using saw horses did you build your own? If so what plans did you follow? Would it be easier to buy some for this? 

bushwacked no journal but if you go to youtube the base is loosely designed off of the one Guy at "guyswoodshop" did and the top is identical to the one that "Thedowntoearthwoodworker" did except I added a plastic laminate top over the MDF.

4 hours ago, Woodenskye said:

Now that's a sharp looking outfeed table!  I wish I could find a 2 thumbs up emoji.

Thank you sir!

3 hours ago, Immortan D said:

I use plastic sawhorses ...

I did as well.

  • Author
On 10/28/2017 at 1:54 PM, pkinneb said:

bushwacked no journal but if you go to youtube the base is loosely designed off of the one Guy at "guyswoodshop" did and the top is identical to the one that "Thedowntoearthwoodworker" did except I added a plastic laminate top over the MDF.

 

Ya I need to be well rested to watch down to earth ... great information but that slow monotone put me to sleep. I need a little more pep most days. 

 

So question ... 

i see you use it as an outfeed as well. No miter slots? Do you just move it out of the way when you use the miter slots? 

Does cutting miter slots in there threaten the flat top?

7 minutes ago, bushwacked said:

Ya I need to be well rested to watch down to earth ... great information but that slow monotone put me to sleep. I need a little more pep most days. 

 

So question ... 

i see you use it as an outfeed as well. No miter slots? Do you just move it out of the way when you use the miter slots? 

Does cutting miter slots in there threaten the flat top?

LOL yeah he is a bit detailed but I have picked up some good tips on a couple projects :) 

Regarding the miter slots while posting the pic I realized I forgot to cut them in...I just need to make a quick template and will knock them out quick 

I didn't put miter slots in mine either, I use the same miter gauge as Paul has pictured here on the same saw and it doesn't bump in to the table.  My sled does just as I finish the cut but it doesn't hinder anything.  I don't know why he didn't put the slots but my thinking was that I use it for assembly also and I didn't want the slots to interfere with the process

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.