Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing Cherry End Table

Featured Replies

I'm completing a Federal style end table made of cherry. My knowledge of finishing wood is very limited so I need some advise. I'm planning to apply dewaxed shellac as a sealer to prevent blotching, followed by application of TUng oil, followed by a application of shellac. Does this make any sense..?

Not sure that oil between layers of shellac will be effective. One usually wants the oil to penetrate the surface thoroughly, which sealing will prevent.

Using a sealer to prevent blotching is usually indicated when a pigment stain is used. Since you didn't mention stain, I would say skip the sealer. If you are concerned that a penetrating oil (true tung oil or such, not "tung oil finish", which is usually a varnish with little or no actual tung oil in it) causing a blotchy appearance, there are other ways to promote even absorption.

Sand to a higher grit, like 400 or even 600. This sort of burnishes the areas where the grain curls out the face of the board, closing the pores so that it absorbs less and matches the edge grain better. Also, another forum member recently experimented with an old finishing recipe that called for warming the oil to 130degF for application, and got very nice, even results.

If the oil finish doesn't leave the cherry as dark red as you like, UV exposure will cause some darkening, and garnet shellac is a common topcoat used to enhance the red hue.

Hopefully one of the finishing experts will pop in with more advice.

Tage Frid taught me his 4F finish, Frid 's Fast F...ing Finish ( he was a feisty colorful old guy) a bit different than it was published. Mix 50/50 danish oil and dewaxed shellac, small amounts in a jar, shake like hell and wipe it on w a rag. Keep rubbing till it just starts to get sticky. Shake before each re-wetting of the rag. Dries quicker than Danish oil alone. Easy to top coat w shellac once you achieve the color/warmth you like. 

https://wellermart.com/t/shellac 

Every color of shellac you could want.  Be smart practice on scrap and take notes of what custom mix is in a jar , add a date too. Old shellac doesn't play nice. Flakes keep better than dissolved . Use it or loose it. 

I just did a federal style table in a class. Cherry.  Used shellac only - 4 coats when I got it home.  Actually I used the canned "Seal coat" which is a 2#cut of dewaxed shellac.  I  like the results.

There is a lot out there on cherry and how to handle blotching. Also keep in mind, as cherry ages, it will go darker, so if you do see some blotch "now" in time, it will mellow as the cherry ages.

 

-Ace-

Over the past 10 years or so, I have built several cherry pieces for my own use. I have had very good results using danish oil (Watco) for blotch control. I first sanded the surfaces through 220 grit then applied the danish oil according to directions. I also wanted to darken the color a bit, so I used a General Finishes gel stain after letting the danish oil dry for only a day. After the stain, everything was allowed to dry at least 3 days before applying the final finish which was usually a wipe on poly. This has worked very well for me. I prefer this to the Neil's conditioner.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.