Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Rattle can polyurethane

Featured Replies

I’m working on finishing a pair of bookcases I built for my wife. Using rattle can poly to seal it in. I have sprayed 2 moderate coats on the cases and shelves. Just sanded the first case down with a fine sanding sponge. Does a third and final coat need to be applied for the finish o be done correctly? Or will two coats be fine? I ask because overspray is an issue with my current set up (in the laundry room with a shop vac and a window as my only source of venting). So I’m almost positive that if I spray another coat, it’s going to be rough again.

 

 

Sent from my iPhone using Tapatalk

  • Author
Wipe on a coat of General Finishes "Arm-R -Seal " with a old tee shirt type rag.


On top of the two existing coats of poly?


Sent from my iPhone using Tapatalk

Lee Valley has Arm-R-Seal. I too would suggest that. super easy to apply & great results.

It also goes a lot further than rattle cans do.  

Remember to hang your varnish rag outside & never ball up a wet varnish rag to dry. Slight chance of spontaneous combustion. Heat is generated by curing varnish. 

I've found Arm-r-Seal at my local Benjamin Moore store as well.

 

I suggest you look into a wipe-on varnish finish rather than spray.  I am betting you'll be pleased.

Many people prefer Arm-r-Seal, but I think Minwax wipe-on (or just regular minwax, thinned with mineral spirits) also looks good.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.