Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My Last Major Equipment Upgrade - New Drill Press

Featured Replies

I've missed the most recent post on this thread. I have turned the table on my drill press to 90 degrees in order to drill into the end of longer parts. 

7 hours ago, wdwerker said:

I have turned the table on my drill press to 90 degrees in order to drill into the end of longer parts. 

Yeah, I was thinking the same thing, but if need be I'll have to come up with some jig or holder.

Some sort of braced 90 degree jig clamped to the drill press table shouldn't be that difficult to slap together. Then you can clamp the part to the jig. Add some stops & guides if you have multiple parts to drill like that.

  • Popular Post

My table does turn 90* and more but, I find I rarely use that feature.  If you do much of this the Peachtree-type of DP table may be worth a Saturday's effort:

 

Peachtree DP table.JPG

You just swing the table to the right and use the side fence and clamps for those operations.

I picked up the drill press on Wednesday and got it moved into the basement on Thursday.  Bit of a saga onto itself, but short version:

The shipping size was larger than I was told because it came on a pallet integrated with the box that I was also told wouldn't be there.  :wacko:  So much for pre-purchase research.

Unit is in 5 main pieces, and I was able  to carry four by myself.  The head unit was too heavy.  Fortunately my wife was willing to help and we were able to get it down the stairs one step at a time.  

I wish the manufacturers would integrate hand holds/lifting points on these heavier components.  I have a block and tackle to lift the head onto the column, but don't see anyway to secure a bridle.  I plan to put this together lying down then lift it upright with  the hoist.  

So the next step is to put togther a mobile base.  The instructions caution you not to put the DP on a mobile base, but then I figured out that was a misprint!  I mean why else would they have integrated the pallet into the box?  They're giving you the plywood to make the base out of!

Seriously, I plan to mitigate the risk by having all 4 casters retract.  I am considering two options:

Portamate 3550 

https://www.woodcraft.com/products/portamate-3550-universal-mobile-base 

Or removable casters on a shop made frame

https://www.rockler.com/rockler-workbench-caster-kit-with-quick-release-plates

The down side of the Portamate is that it sits on four rubber feet rather than all the way on the floor.  Is that less stable?The upside is minimal building, just cut the plywood.  

The down side of the Rockler is the building, but it could sit all the way flat and the caters can be removed and put out of the way.  

Thoughts?

Second question, how big to make it?  The DP base is 23 x 18, but I could make the base larger for added stability, but how much base do I want underfoot?

4 hours ago, Mark J said:

Seriously, I plan to mitigate the risk by having all 4 casters retract.  I am considering two options:

I did this and it feels very stable when being moved.

I made one out of Woodsmith magazine. It has feet that you turn down once it’s in place it has worked well for many years. I’ll try to post pics when I get back into town tomorrow 

edit to add pics.

1150589231_DP2.thumb.JPG.5af09d3da8d59b1bee387fbe006eb62f.JPG

1277796823_DP1.thumb.JPG.9679524dc2b7faa9c08a9fe7616e72fd.JPG

 

17 hours ago, gee-dub said:

I did this and it feels very stable when being moved.

So, if I understand correctly, you used the RediMix in lieu of sand?  You didn't actually mix it up with water?

1 hour ago, Mark J said:

So, if I understand correctly, you used the RediMix in lieu of sand?  You didn't actually mix it up with water?

I left it dry.  Redi-crete had more weight by volume based on my super-scientific method of picking up a bag of each. Or maybe it was just a dollar less ;-)  Any fine-grain, dense,  heavy filler would do.

On 10/6/2018 at 8:29 PM, pkinneb said:

I made one out of Woodsmith magazine. It has feet that you turn down once it’s in place it has worked well for many years. I’ll try to post pics when I get back into town tomorrow 

edit to add pics.

1150589231_DP2.thumb.JPG.5af09d3da8d59b1bee387fbe006eb62f.JPG

 

 

In a roughly similar situation I used caster that screwed into short (and ultimately inadequate) threaded inserts.  The inserts came out under not very much lateral force.

Can you show us your inserts?

12 hours ago, Pondhockey said:

In a roughly similar situation I used caster that screwed into short (and ultimately inadequate) threaded inserts.  The inserts came out under not very much lateral force.

Can you show us your inserts?

Sure here you go. The plans called for T-Nuts not inserts.

1706766219_DP3.JPG.de7440dfd56e21207e96140c83c405f8.JPG

1019550102_DP4.JPG.0a0ec98bd9a54d5b742fc451bec5a3f6.JPG

Ah, I see.

In my case the casters were mounted the way your feet are mounted.  That didn't work (it didn't handle lateral force when moving the base.)  Your casters look to be more securely fastened, and lateral force is not much of an issue for the feet.

1 minute ago, Pondhockey said:

Ah, I see.

In my case the casters were mounted the way your feet are mounted.  That didn't work (it didn't handle lateral force when moving the base.)  Your casters look to be more securely fastened, and lateral force is not much of an issue for the feet.

Truth be told I rarely move the DP itself I slide the cabinet out on occasion but that's about it.

Pretty Cadilac solutions.

@pkinneb the cabinet on your mobile base is an interesting feature.  Does it significantly limit the poditioning of the drill press' table and drill depth?

Rarely and only then becuase I store my glue bottles on top of it. Maybe a couple times a year I have to move a couple glue bottles and maybe once ever have I had to move the storage but its on wheels so no real issue there. As you can see here my table is quite a bit higher than the cabinet.

IMG_0755.thumb.JPG.cfeb72a2a1247cbe40c4b4d569ce622f.JPG

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.