Ronn W Posted August 3, 2018 Report Posted August 3, 2018 I just opened my new Whiteside rabbet bit with several bearings for depth of cut. I was cutting a 1/8" deep x 3/4" wide dados in poplar as practice cuts. Smooth as silk. Then I tried the same cut in end grain poplar. The blade caught the wood and the router noise changed to an angry load growl. Turns out that one of the 2 carbide tips was gone. Not cracked or chipped, just gone. I happened to find the tip sitting on top of a piece of wood about 3 feet away the next morning. I realized that the incident involved a significnat imapact but should this ever happen with this type of bit? Pics attached. Quote
pkinneb Posted August 3, 2018 Report Posted August 3, 2018 My short answer would be no. I would call Whiteside I bet they will make it right. Quote
Minnesota Steve Posted August 3, 2018 Report Posted August 3, 2018 I don't think that should happen. I think it's a manufacturing defect where the braze failed. Quote
Chet Posted August 3, 2018 Report Posted August 3, 2018 Yea, I agree, it shouldn't happen. It would be a sad day if we have to add wearing kevlar as part of shop safety. Just glad it didn't imbed in you when it came loose. 1 Quote
Chestnut Posted August 3, 2018 Report Posted August 3, 2018 Yikes yeah that shouldn't happen. Even the cheap chineese bits stay together. Good thing you weren't hit by the piece of carbide. Quote
Ronn W Posted August 5, 2018 Author Report Posted August 5, 2018 I contacted the seller thru E-Bay and they agreed to replacing the bit and all its various beatings. It didn't bother me too much at the time but now I am thinking of the damage that tip could have done........I need my safe space. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.