Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Arm R Seal on chair arms

Featured Replies

I've finished a set of chairs with ARS and after about 6 months the finish on the arms became soft and discolored.  On the worst two I sanded to bare wood,  redyed with General Finishes water based dye.  My thought was the first time the dye had not completely dried so I waited a week before applying three very thin wiped on coats of ARS.   The finish is softening again,  I'm thinking it is the oils or sweat from hands and arms reacting with the finish.  Has anyone experienced this and have a solution?  Would lacquer sprayed over the ARS provide more protection or is this just not a good place to use ARS? 

Your poly went bad. I've had some that gets old and this is what happens to it.

You are correct about the skin oils and just being a human on the finish. Im wondering if you didn't apply enough? You advised "thin" coats. What you want is a build of finish. Which offers more protection. 

I've never inquired if water-based offers more protection to skin oils? Solvent lacquer and even solvent shellac will soften from human oils, even easier than an oil poly in my opinion. But of anything, a build of finish is what you need. Also, from time to time, cleaning the arms of the chair with mild soap and water and wipe dry helps remove the human scuts & fugs. 

-Ace-

+1 for the ARS being old/bad. I have ARS on my desk which has seen hours of use daily for the past year+ and it has not softened at all.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.