socoj2 Posted April 12, 2019 Report Posted April 12, 2019 I exclusively use this to cut up sheet goods. So combo blade. Ridgid carbide? What are your favorite blades? Quote
pkinneb Posted April 12, 2019 Report Posted April 12, 2019 I just use the Festool ones in my TS55 the work well for me. Quote
Chet Posted April 13, 2019 Report Posted April 13, 2019 19 hours ago, pkinneb said: I just use the Festool ones in my TS55 the work well for me. Me too. Quote
Chestnut Posted April 13, 2019 Report Posted April 13, 2019 Festool uses Leitz which is about as top of the line as you can go. I looked at other blades but then decided for the small extra might as well just get festool. Sharpen your festool baldes though. You should be able to get a few sharpenings on them. Quote
Just Bob Posted April 13, 2019 Report Posted April 13, 2019 I have a local saw sharpening service that I really like. After I had taken my Festool blade to him for sharpening a couple of times, he recommended that I try this Oshlun blade, https://www.amazon.com/Oshlun-SBFT-210052-FesPro-Crosscut-Festool/dp/B004IYJKV4/ref=sr_1_10?hvadid=177807438175&hvdev=c&hvlocphy=9033402&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=5870734405165668648&hvtargid=aud-647006051489%3Akwd-6920643461&keywords=oshlun+blade&qid=1555186381&s=gateway&sr=8-10 . I have been using it for a couple of years now and cannot see a difference in the cut quality from my Festool blade. It has held up very nicely, and at $36.00 you can't beat the price. Quote
Fly2low Posted April 14, 2019 Report Posted April 14, 2019 this blade is a tad more than the Oshlun, but is a good blade https://www.forrestblades.com/ply-veneer-saw-blade-for-cutting-plywood-and-plywood-veneers/210mm-8.25-ply-veneer-saw-blade-for-festool-ts-75-eq-cross-cuts-on-wood-veneers-70-teeth/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.