Tom King Posted December 18, 2020 Report Posted December 18, 2020 For my old power tool collection. It's a 5" run off a 1/4" drill motor. I'm not sure what year they made these, but it must have been before anyone designed a good blade guard. The blade guard covers about half of the width of the blade. The blade guard may even be on wrong. I haven't messed around with it yet. I'm not sure if any parts are missing, but I don't intend to even run it anyway. I bought it cheap off CL, and had the seller ship it to me. 1 Quote
Tpt life Posted December 18, 2020 Report Posted December 18, 2020 If the guard is on wrong, then that keeper rod is a late addition by a previous owner. It won’t clear the shroud. Is that two hand operation? Quote
Tom King Posted December 18, 2020 Author Report Posted December 18, 2020 I didn't do anything with it, but take it out of the shipping box. The guard does rotate, but the spring is gone. I didn't check to see how far it goes around. Yes, two hand operation. You have to hold the trigger on the drill motor, and the other hand on the handle. I'm surprised that it looks like it has as much use as it does. The motor has a nameplate that says 1/4" drill, but doesn't have a chuck on it. The stop for the guard looks original. The rubber is as old as that on the cord. Quote
wtnhighlander Posted December 19, 2020 Report Posted December 19, 2020 I have the saw portion of one similar, that was in my grandfather's collection of stuff. It has no guard, and I'm not sure it ever did. I'm not planning to chuck it up to a drill, either! Quote
Mark J Posted December 19, 2020 Report Posted December 19, 2020 4 hours ago, Tom King said: but I don't intend to even run it anyway. So watcha gonna do with it? Quote
Dave H Posted December 19, 2020 Report Posted December 19, 2020 That's different where the trigger is located off to the side like that and not on the pistol grip behind the saw. You would have to use both hands You wouldn't be able to steer the saw with your hand on the side like that hmm. Thank goodness Skil made the model 77, I never liked sidewinders, the first time I used the model 77 I never looked back. That is an interesting saw though a real conversation starter for sure. Quote
Tom King Posted December 19, 2020 Author Report Posted December 19, 2020 13 hours ago, Mark J said: So watcha gonna do with it? I plan to display all the old power tools around the top of the walls in my office. Right now, they're in various storage buildings here. I have enough that I bought over the years for my own use, that will cover three walls, and the other oddballs will go on the other wall. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.