Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Ridgid R4512 TS Upgrade to Grizzly Worth It?

Featured Replies

Hi guys!

Happy Memorial Day to those in the US!

I'm just an amateur woodworker, but have been doing more projects lately. I've had the Ridgid R4512 table saw for years now, but I'm starting to think about a possible upgrade, and was hoping to get some input. I have an extremely small shop space, and what I absolutely love about the Ridgid R4512 is the integrated mobile base that lets you not just move the saw around with ease, you can actually spin it in place, unlike other mobile bases where two wheels do not turn.

What I absolutely can't stand about the Ridgid R4512 is the fence. It never stays parallel to the blade, and for that reason it takes forever to setup a rip cut. I've tried some 3D printed part that was supposed to fix it, but it doesn't work. I'm totally over the fence on this saw, and had been considering replacing the fence, but just recently I was trying to cut some 9 quarter red oak, and the saw was bogging down. I'm now thinking it's not worth putting the money into a new fence for this saw. If I did purchase a new saw, getting a reliable fence would be tops on my list of needs.

I am also on a very thin budget, I can't spend $2000 or $3000+ on a table saw and expect to remain married, so my choices are limited. I'm mostly considering:

Grizzly GO962 Hybrid

Grizzly GO771Z Hybrid

And possibly the Grizzly GO899 Cabinet

Here's a link that compares the three Grizzly saws above:

https://www.grizzly.com/products/compare?category=table_saws&items=g0771z|g0962|g0899

The R4512 has been discontinued, but here's a review of the saw with more info on its specs:

https://www.aconcordcarpenter.com/ridgid-10-inch-13-amp-table-saw-r4512.html

Would any of these Grizzly saws be a significant upgrade from my Ridgid R4512 with its 1.5 hp motor and 30" rip capacity? Would there be much difference in power going form a 1.5 hp to a 2.0 hp motor? How are the fences on these Grizzly? The most expensive GO899 I'm considering only because the fence seems to have steel rails, otherwise I like the price of the other two better, and I think all three are fairly equal in secs, unless I'm missing something. And, could I add a router table insert to any or all of these Grizzly saws?

Any help or input would be greatly appreciated!! Thanks in advance!!

I don't know the Rigid line well so this question may not make sense, but have you explored aftermarket fence options?

I've got a 1.75 HP table saw, and while I sometimes have to slow down on some heavy cuts, I've never felt I needed a more powerful saw.  I use thin kerf blades, and if I find I have to push the wood, waxing the table top usually fixes the problem.  Like @Von said, see if you can just replace the fence.

On the other hand, I sympathize with getting disgusted with a tool and just wanting to get rid of it.

I'm not familiar with the saws you mentioned, but I upgraded from a job site saw to a "real" contractor saw, and I'd never go back.

I never paid attention, but I see a bunch of Youtube videos about souping up jobsite saws by building extended tables, extended fences, cabinets with dust collection, etc.

Sorry to dump a bunch of random thoughts on you.  Good luck!

I have the Craftsman version of the Ridgid R4512. I bought it used and it came with a Vega aftermarket fence. No complaints with the fence.

Depending on when your R4512 was made, it may have an issue with the blade alignment when you raise/lower it. I think you can look at the trunion to see which version you have.

What blade were you using for the rip cut?

  • Author
On 5/26/2026 at 12:18 PM, Von said:

I don't know the Rigid line well so this question may not make sense, but have you explored aftermarket fence options?

Yes, this was actually my plan, but when my Ridgid recently started to bog down ripping some 8 quarter+ red oak, I started to question if I wanted to put more money into this saw. A decent aftermarket fence is going to be at least $300, and I'd have to dill new holes in the rails, from what I've researched so far.

  • Author
On 5/26/2026 at 1:52 PM, Beechwood Chip said:

I've got a 1.75 HP table saw, and while I sometimes have to slow down on some heavy cuts, I've never felt I needed a more powerful saw.  I use thin kerf blades, and if I find I have to push the wood, waxing the table top usually fixes the problem.  Like @Von said, see if you can just replace the fence.

On the other hand, I sympathize with getting disgusted with a tool and just wanting to get rid of it.

I'm not familiar with the saws you mentioned, but I upgraded from a job site saw to a "real" contractor saw, and I'd never go back.

I never paid attention, but I see a bunch of Youtube videos about souping up jobsite saws by building extended tables, extended fences, cabinets with dust collection, etc.

Sorry to dump a bunch of random thoughts on you.  Good luck!

Yes, I recently tried a thin kerf blade that I believe is a better fit for my 1.5 hp Ridgid TS. Until the time when it gave me some trouble ripping some thick red oak, I didn't think I *needed* more power either. I'd be quite certain that 2 hp would be all I'd ever need.

I'm not sure if I want to invest in this saw enough to add a new fence, but that might still be an option. I'm not 100% on buying a new saw, just kind of weighing the options. 

  • Author
On 5/26/2026 at 2:17 PM, legenddc said:

I have the Craftsman version of the Ridgid R4512. I bought it used and it came with a Vega aftermarket fence. No complaints with the fence.

Depending on when your R4512 was made, it may have an issue with the blade alignment when you raise/lower it. I think you can look at the trunion to see which version you have.

What blade were you using for the rip cut?

I was using a reasonably new Diablo ripping blade. I know they are far from the gold standard, but the blade was fairly new, I only use it to rip hardwood, which I don't do that often. I think I'm going to try a CMT thin kerf ripping blade next.

And if I had the Vega fence on my saw, I'd probably have no complaints either :) Do you have any idea how that fence mounted to your saw? Did it require modifications to your saw?

  • Author

Guys, a couple more thoughts:

I revisited the idea of putting a new fence on my Ridgid saw, and I'm all ears for any advise here, but it seems to me that a decent fence system is going to be $300 minimum for something like a Delta, and I'd have to drill my saw for new mounting holes (unless I'm mistaken). I think that $300 would be best put towards a new saw, don't you think?

Something like the Incra fence system would start at $500+, and there's no way I'd put that kind of money into this Ridgid saw, unless..... If I did spring for the Incra fence system now, wouldn't I be able to keep and use that fence system on a new Grizzly, SawStop, etc TS down the road? So would something like an Incra fence system be an investment even if I got a new saw later?

It comes down to; I want a new saw, and I was originally attracted to the $1300 Grizzly linked above, but the truth is the saw I really want is going to be $2000 or more. I can't plunk down $2000+ on a new saw right now, but now that I know what I'm looking at, I can plan for it.

I had previously disregarded SawStop because I thought all their saws (besides job site) started at $3000 and up. But, a reply above made me take a look at the SawStop contractor saw for about $2250 since, you know, I like my fingers, and I'm not particularly bright sometimes :D This saw is pretty much on-spec with all the Grizzly saws I'm shopping, and I was surprised at the price point. Can anyone tell me if this saw is as stable and solid as a cabinet saw or even a decent hybrid? I don't want something rickety, I want was and stability. I really wanted cast iron wings, but truthfully I have stamped steel on my Ridgid, and they are fine.

And, my wife is genuinely interested in learning more about woodworking, and I simply couldn't live with myself if she got hurt on my table saw. Maybe SawStop would be the best option, even if it's more costly now. This is very likely the last table saw I will ever purchase, unless something crazy happens :P

I can *hope* to find a used saw, but quality tools never seem to pop up in my area. I searched for over a year for an 8"+ jointer before finally breaking down and buying the 6" Ridgid jointer brand new (which really was the right choice for the size of my shop anyway :)).

Sorry this was so long, but how would you guys proceed? Any help would be much appreciated!

  • Popular Post

Let me tell you a story.  

Many years ago (so adjust all these prices up for inflation) SawStop came out with their inexpensive contractor saw for $1500.  I decided that I could just about swing that and walked into the showroom to buy it.  But it turned out that with all the options and etc, it would cost about $1700.  I said, "Nope!  I budgeted $1500, I'm willing to spend $1500, but $1700 is too much."

So, instead I bought a nice Bosch job-site saw for about $450.  A few weeks later I was making a bunch of repetitive thin cuts.   I had to remove the blade guard because the blade was close to the fence.  At one point I reached for an offcut and didn't realize the blade was still spinning down.  The blade jammed into my thumb and tore out a big chunk of flesh.  The blade had almost stopped, so I got off with just a sprained thumb.

I had rejected the SawStop because it was $200 over the arbitrary limit that I had set in my mind, and almost lost my thumb.

Sold the Bosch and bought the SawStop.

I'm the last one who should be giving relationship advice, but maybe go to your wife and lay out this whole decision just like you did for us, and ask her what she thinks?  She may decide that your fingers are worth a few hundred dollars.

  • Author
On 5/26/2026 at 11:29 PM, Beechwood Chip said:

Let me tell you a story.  

Many years ago (so adjust all these prices up for inflation) SawStop came out with their inexpensive contractor saw for $1500.  I decided that I could just about swing that and walked into the showroom to buy it.  But it turned out that with all the options and etc, it would cost about $1700.  I said, "Nope!  I budgeted $1500, I'm willing to spend $1500, but $1700 is too much."

So, instead I bought a nice Bosch job-site saw for about $750.  A few weeks later I was making a bunch of repetitive thin cuts.   I had to remove the blade guard because the blade was close to the fence.  At one point I reached for an offcut and didn't realize the blade was still spinning down.  The blade jammed into my thumb and tore out a big chunk of flesh.  The blade was almost stopped, so I got off with just a sprained thumb.

I had rejected the SawStop because it was $200 over the arbitrary limit that I had set in my mind, and almost lost my thumb.

Sold the Bosch and bought the SawStop.

I'm the last one who should be giving relationship advice, but maybe go to your wife and lay out this whole decision just like you did for us, and ask her what she thinks?  She may decide that your fingers are worth a few hundred dollars.

Yikes! I'm so glad you weren't hurt!

And I have done the same math; are my fingers worth $300, $400+ more. I mean, of course they are! This is why I may wait and get what I hope will be my last table saw ever. 

  • Popular Post

Safety concerns aside (but not disregarded!), you asked if the Sawstop contractor saw is as stable and solid as the hybrid or cabinet saws you listed, and the answer is no. While it is probably much more solid than other contractor saws, being a 'contractor' saw means it doesn't / can't have the mass that gives cabinet saws their stability.

I feel you pain over the cost of these machines, and I wouldn't be likely to buy one for myself. Becoming responsible for another person's safety is a different matter, and Sawstop is still king of the hill in that regard. But unless you need the portability of a contractor saw, I think you will be less than satisfied with the Sawstop contractor model.

Is there a retailer near you with the SawStop saw on display that you could examine? 

On 5/26/2026 at 7:20 PM, TheWoodShouter said:

I was using a reasonably new Diablo ripping blade. I know they are far from the gold standard, but the blade was fairly new, I only use it to rip hardwood, which I don't do that often. I think I'm going to try a CMT thin kerf ripping blade next.

And if I had the Vega fence on my saw, I'd probably have no complaints either :) Do you have any idea how that fence mounted to your saw? Did it require modifications to your saw?

I believe the Vega fence mounts using the standard holes on the saw but looking at this video it seems like you have to drill a hole. I'm pretty sure Vega has closed their doors now.

  • Popular Post
On 5/26/2026 at 9:30 PM, TheWoodShouter said:

I revisited the idea of putting a new fence on my Ridgid saw, and I'm all ears for any advise here

Even if you put a new fence on your Ridgid saw you'll still have the issue with power. How often are you really going to be ripping 9/4 wood? I doubt you would want to put an aftermarket fence on a new $1500+ saw.

On 5/26/2026 at 9:30 PM, TheWoodShouter said:

I really wanted cast iron wings, but truthfully I have stamped steel on my Ridgid, and they are fine

I was lucky enough to find some free cast iron wings on a saw next to a dumpster. I was shocked at how much quieter it made my saw once I installed them. Sawstop does sell the cast iron wings for $350 for the contractor saws. Might be worth looking for a used saw with a broken motor and using the fence/wings.

All of that being said, I still want a Sawstop PCS. If I'm going to spend that much money, might as well get the 3.0 hp motor, but that requires 230v and I would need to replace replace my 50 year old panel.

  • Author
  • Popular Post

Hey everyone, thank you all so much for the replies! 

I think I've decided that I want a new saw, and while I'm not sure yet what saw I want, I now realize that it's going to be at least $2000 for a Grizzly, and maybe over $3000 if I go for the entry-level SawStop cabinet saw. I really like the idea of SawStop, but it does come with an unfortunate price tag. I mean, fingers are great and all, and I do play a little guitar, but it's not like I'm Eric Clapton over here :D

In all seriousness, if I can swing it, I think I'd be silly not to get a SawStop, though I do not want the contractor saw. I do want at least a hybrid if not a full cabinet saw. I'd *almost* rather buy their job site saw, and build a custom setup with infeed, outfeed, and side support. I don't want a saw that lacks that sense of mass, or feeling that it's solidly in place. My current Ridgid may not be much, but it's a solid hybrid saw when the wheels are up, and I don't want to go backwards on that.

It does look like this is going to be a purchase that I need to plan for, but I don't want to skimp now that I know what I want :)

Thanks again everyone, talking through this really helped!

On 5/27/2026 at 9:25 PM, TheWoodShouter said:

I'd be silly not to get a SawStop, though I do not want the contractor saw.

I have the contractor saw, with cast iron wings, extended fence and outfeed table.  I admit that I daydream about upgrading to their cabinet saw, but I'm perfectly happy with the contractor.  Can I ask why you're dead set against it?

  • Popular Post
On 5/27/2026 at 8:25 PM, TheWoodShouter said:

Hey everyone, thank you all so much for the replies! 

I think I've decided that I want a new saw, and while I'm not sure yet what saw I want, I now realize that it's going to be at least $2000 for a Grizzly, and maybe over $3000 if I go for the entry-level SawStop cabinet saw. I really like the idea of SawStop, but it does come with an unfortunate price tag. I mean, fingers are great and all, and I do play a little guitar, but it's not like I'm Eric Clapton over here :D

In all seriousness, if I can swing it, I think I'd be silly not to get a SawStop, though I do not want the contractor saw. I do want at least a hybrid if not a full cabinet saw. I'd *almost* rather buy their job site saw, and build a custom setup with infeed, outfeed, and side support. I don't want a saw that lacks that sense of mass, or feeling that it's solidly in place. My current Ridgid may not be much, but it's a solid hybrid saw when the wheels are up, and I don't want to go backwards on that.

It does look like this is going to be a purchase that I need to plan for, but I don't want to skimp now that I know what I want :)

Thanks again everyone, talking through this really helped!

My two cents re SawStop. While I think the safety technology is great make no mistake the cabinet saw (I have the 3hp version) is second to none even without it. I've owned three TS's (Ridgid, PM66, and the PCS) and its be a large margin the best! Its solid, has a great fence, quiet, awesome cuts, a two wrench arbor (should be standard on all TS's) and to date the best manual hands down of any tool I've purchased period. 

  • Popular Post

I think I am one of the most recent to post a pic like this and I hope that I’m the last.

IMG_0328.thumb.jpeg.b0fdfcef3d30fd1ee92e4b0acd920d6e.jpeg

I get my stitches out tomorrow and have been promised that I will have a complete fingernail in 6 months. I have a Jet 10” ProShop with a 1.75 hp engine and use a thin kerf blade. If I were younger, I would probably park the Jet by the curbside and buy the ShowStop. At my age, I’ll count on this blue flag as a reminder to be more careful in the future. Good luck on your decision. 

On 5/27/2026 at 9:25 PM, TheWoodShouter said:

I'm not sure yet what saw I want, I now realize that it's going to be at least $2000 for a Grizzly, and maybe over $3000 if I go for the entry-level SawStop cabinet saw. I really like the idea of SawStop, but it does come with an unfortunate price tag.

Not sure if you've made any decisions yet or not. I received a few different emails this morning of cash back rebates on Sawstop. $275 back on the Professional saw and $175 off the Contractor saw.

21 hours ago, legenddc said:

Not sure if you've made any decisions yet or not. I received a few different emails this morning of cash back rebates on Sawstop. $275 back on the Professional saw and $175 off the Contractor saw.

Rebate?  That's something very new for SawStop.

On 6/4/2026 at 8:23 AM, Mark J said:

Rebate?  That's something very new for SawStop.

Rebate in this case is a store credit wherever you bought it from. It is different from their usual free mobile base or other accessory.

  • Author
  • Popular Post

Guys, sorry about the late reply, I have been on vacation :-)

On 5/27/2026 at 9:43 PM, Beechwood Chip said:

I have the contractor saw, with cast iron wings, extended fence and outfeed table.  I admit that I daydream about upgrading to their cabinet saw, but I'm perfectly happy with the contractor.  Can I ask why you're dead set against it?

Only because the contractor saws I've been around (which have mostly been very old USA made Craftsman) tend to be kind of rickety, and I want something very stable. Admittedly, I've never been on a newer contractor saw, and I've certainly never tried the SawStop. I'm sure it's a fine machine, so I will give it some more thought.

On 5/27/2026 at 9:49 PM, pkinneb said:

My two cents re SawStop. While I think the safety technology is great make no mistake the cabinet saw (I have the 3hp version) is second to none even without it. I've owned three TS's (Ridgid, PM66, and the PCS) and its be a large margin the best! Its solid, has a great fence, quiet, awesome cuts, a two wrench arbor (should be standard on all TS's) and to date the best manual hands down of any tool I've purchased period. 

I can't lie, that's just what I"m looking for, but the price tag on the SawStop cabinet saw isn't something I can just plunk down today and expect to remain married past tomorrow :D

On 5/27/2026 at 10:38 PM, Coop said:

I think I am one of the most recent to post a pic like this and I hope that I’m the last.

IMG_0328.thumb.jpeg.b0fdfcef3d30fd1ee92e4b0acd920d6e.jpeg

I get my stitches out tomorrow and have been promised that I will have a complete fingernail in 6 months. I have a Jet 10” ProShop with a 1.75 hp engine and use a thin kerf blade. If I were younger, I would probably park the Jet by the curbside and buy the ShowStop. At my age, I’ll count on this blue flag as a reminder to be more careful in the future. Good luck on your decision. 

I'm so sorry to see this! I am certainly glad to see it wasn't worse! There's no doubt that if money wasn't a large driver of my purchase decision, I'd have already ordered a SawStop :-) 

On 6/3/2026 at 10:41 AM, legenddc said:

Not sure if you've made any decisions yet or not. I received a few different emails this morning of cash back rebates on Sawstop. $275 back on the Professional saw and $175 off the Contractor saw.

Thank you, I did see that at the Woodcraft website, and I would for sure use that rebate to get a good mobile base. Any saw I get necessarily needs a mobile base in my tiny shop.

I'm still deciding what I want to do. It may be some time before I make a final decision, but I do appreciate all the help and suggestioons!

Thanks everyone!

When I bought my Sawstop CNS, I upgraded to the cast iron wings.  I was just on the Sawstop web site, and it seems they no longer offer that as an option.  

Does anyone have the CNS with the stamped steel wings?  How's the vibration and stability?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.