Recommended Posts

Posted

The smoke detector in my workshop tends to false alarms. Anyone know of a good smoke detector for a workshop?

I've heard of heat detectors being an alternative but don't have any experience with them.

TIA

Posted
On 9/18/2026 at 6:53 PM, Von said:

The smoke detector in my workshop tends to false alarms. Anyone know of a good smoke detector for a workshop?

I've heard of heat detectors being an alternative but don't have any experience with them.

TIA

Do you have a fire risk out there, or just being cautious?

Either way, sorry. No. I don't have one in my shop but if I did it would likely just be a run of the mill jobber off the shelf. 

  • Like 1
Posted

The detection technology is the handicap.  I do not run detectors in my shop but, I do have cameras.  I also have extinguishers at every door.  They are handy if I am going in to deal with something and they are handy if I have made it to the exit, exhausted the extinguisher, and have decided to run for it.

  • Like 2
Posted

@Von, there are several fire / smoke detection technologies on the market, but some run into real $$$ to install. I would start by evaluation what makes the detector you have trigger falsely.

If it is the typical home detector, I believe it can be triggered by any fine enough particulate in the air. A heat sensor may be a better fit, but has drawbacks of its own. The basic type would false trigger on a hot day in my small, un-conditioned space. The type that measures rate of temperature rise would be more reliable. See here: https://www.alarmsystemstore.com/collections/heat-detectors?srsltid=AU7gw4UPaW_omdN-6WtNyT9jAoT9CcceNy45wkhhAp6oUXJAKqwbhUG8

At work, we use digital video cameras with thermal imagers to detect fire. Tricky, since in a steel mill, lots of stuff is SUPPOSED to be on fire. The algorithm examines absolute temp, temp rise rate, and image movement. Does an amazing job, if positioned appropriately to the desired field of view, but now we're talking industrial-grade expense...

  • Like 2
Posted

I believe that there are two types of home smoke alarms.  One gets triggered by smoke blocking a beam of light, so dust will set it off.  The other gets triggered by ionized particles in the air, so it will get set off when something gets hot.  The ionization type is better in a wood shop, I assume, but it can still be set off if your feed rate burns the wood (EG, cherry).  Some detectors have both types.

  • Like 1
Posted
1 hour ago, Ron Swanson Jr. said:

Do you have a fire risk out there, or just being cautious?

Nothing atypical for a hobbyist wood worker. Cutting certain types of pre-finished plywood seems to trigger the detector.

As I believe as is called for by our local code, a smoke detector was installed in our garage and is hardwired and synced to all the others in the house, so when it goes off, the alarm is house-wide and really disruptive.

Thanks for the feedback all, I will look into ionizing smoke and heat detectors.

  • Like 1
Posted

All of the above.  All our detectors in our new house are 10 year battery type.  When we hit the 9 year mark we're just gonna move.

Seriously, I don't think home type detectors are going to be very compatible with a wood shop, just as they aren't generally placed in a kitchen.  But what does @Coop, our resident expert, think?

  • Like 1
Posted
On 9/19/2026 at 4:04 PM, Coop said:

I thought our dog was the only one that went crazy when the batteries were low.

I'm no expert, but I bet you could train a puppy not to freak out to a low battery chirp, but instead come get you and lead you to the chirping detector.  Hint, replace the battery with a variable voltage power supply, so you can trigger the low battery chirp whenever you want for training.

  • Like 2
Posted

Since yours is hardwired into the whole house system, I'd be reluctant to swap detector types based only on what works in a detached hobby shop. First, get the exact model number that's installed and see what the manufacturer allows at that location. The fact that cutting certain prefinished plywood sets it off is useful. I'd also check whether dust collection and air movement are carrying the fine stuff directly toward the detector. Moving the source of the nuisance may be easier than giving up smoke detection entirely. A rate of rise heat detector sounds interesting, but I'd want to know what your local code and the alarm manufacturer allow before changing a device that's interconnected with the house.

  • Like 2
  • 1 month later...
Posted

I ordered a https://flamedetector.com/. Got it today and got it set up. While I had success, it was a little annoying.

The product used to be known as "Eye Detekt" and they have renamed it. Problem is all the directions in the packaging refers to eyedetekt.com and the "Eye Detekt" app, neither of which exist any more. So you have to remember an email you got when you ordered it and go look for the app under the new name.

 It's an IOT device that wants to connect to your wifi and have you create an account. By default, it steered me to a username and passkey, which would have been fine, but I couldn't get to work, registration kept breaking. Fortunately good old username/email address and password as an option and worked.

So in theory it's set up now and I can see the detector on my phone. Next time the dog is out of the house, so I don't freak them out, I'll give it a test and then get it mounted in the shop. 

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 59 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined