Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

twist drill stop collars

Featured Replies

  • Popular Post

I had the stop collars with a set screw to lock them in place, but it was finicky to get the screw to line up with a flat on the drill bit.  So, I bought these Powertec split ring stop collars which in theory solve that problem by gripping the drill bit firmly over a larger area.

I went to use the Powertec collars on a 1/4" drill and it failed miserably.  no matter how much I tightened the screw, the collar would still slip.  Eventually, the supplied hex wrench cammed out and rounded over.  I switched to a 3/32 hex key from my set and it too cammed out.

So, I'm back to using painters tape on the drill bit.

Does anyone know of a stop collar that works reliably on twist drills?

I can't use my drill press for reasons.

  • Popular Post

Sorry I got nothing for you. But in the past, I have made physical stops from a block of scrap. Crude but very effective. 

 

But most of the time I just do what you do and bust out the painters tape!

On 9/26/2026 at 6:12 PM, Beechwood Chip said:

With a screw to hold it in place, or thick enough to touch the chuck?

Thick enough to touch the chuck. 

+1 to @Ron Swanson Jr.'s idea: basically a custom spacer to set the depth.

I agree with your overall problem statement: depth stop suck. You are causing me to think about it and I basically don't use them for all the reasons you give.

  • Popular Post

The block of scrap absolutely works.  I have a couple of collet style ones that work OK if you are careful.  If you want something to dead-stop the depth repeatedly go with the blocks of scrap

GuestDresser(186).thumb.jpg.a9af5de17d53aa9936c77c0831329334.jpgCoDinternalstructure(5).jpg.64eb8c3bc61e5b5a265c04735983150e.jpg

  • Popular Post
On 9/27/2026 at 7:58 AM, wtnhighlander said:

One more comment: this type of spacer is the wrong application for that scrap of SPF 2x4 you have lying around. The drill chuck jaws will easily dig in to the soft wood and ruin your precisely measured and cut space. Go hardwood, all the way! 

Agreed.  Scraps of pecan left over from a kitchen hutch build years ago still come in handy.  Like Clint says:

https://www.youtube.com/shorts/-e0IkNR34b8?feature=share

Seriously though, any decent hardwood will do.  I keep a 5 gallon bucket of kindling sized scraps around for just such situations.  If the bucket gets full we make S'Mores with the grandkids and start filling it again.

  • Popular Post

Back on depth stops, the hammer drills I have used, had rods that ran along the drill body, not stop collars. I have not looked, but wonder if you could get one that fits your drill?

  • Popular Post
On 9/27/2026 at 12:09 PM, Beechwood Chip said:

Hmmm, $41 more and I get free shipping.  Any suggestions? :)

Without a doubt, one of my most frequently used tools is their base model marking gauge. I believe it's right around $40. If I ever, God forbid, had to start selling off my tools, this would be one of the very last to go. 

 

20260927_122559.thumb.jpg.012e70fd44078e89f0068b181fb03d7c.jpg

 

On 9/27/2026 at 10:09 AM, Beechwood Chip said:

Hmmm, $41 more and I get free shipping.  Any suggestions? :)

My favorite marking gauge is the Stainless Steel Anniversary version.  What makes it great is the eccentric rod placement.  It is not commonly offered but this version has the same benefits.  The micro-adjust is just a bonus.

  • Popular Post
On 9/26/2026 at 2:58 PM, Beechwood Chip said:

I had the stop collars with a set screw to lock them in place, but it was finicky to get the screw to line up with a flat on the drill bit.  So, I bought these Powertec split ring stop collars which in theory solve that problem by gripping the drill bit firmly over a larger area.

I went to use the Powertec collars on a 1/4" drill and it failed miserably.  no matter how much I tightened the screw, the collar would still slip.  Eventually, the supplied hex wrench cammed out and rounded over.  I switched to a 3/32 hex key from my set and it too cammed out.

So, I'm back to using painters tape on the drill bit.

Does anyone know of a stop collar that works reliably on twist drills?

I can't use my drill press for reasons.

Man, that Powertec split ring failing is a bummer, I've had the same problem. The set screw design is just too finicky. I've had better luck with the General Tools split-ring set, or if you want to splurge, the Woodpeckers Precision Stops actually hold. For a quick fix, painters tape is honestly still undefeated.

  • Popular Post
On 9/27/2026 at 9:24 AM, gee-dub said:

The block of scrap absolutely works. 

After messing around with a collar for 5 min last night I just cut a scrap of wood, drilled a hole in it, and bam, good to go! Anybody want to buy a nice set of barely used collars :D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.