Popular Post gee-dub Posted November 1 Popular Post Report Posted November 1 I have a small backpack in the truck. It has tie-downs, a red flag, gloves, a small tape measure, and one of those octopus bungee things for when I am hauling lighter items. It also has a little tag on it that says "cash" in big letters. I get 2-1/2% off for paying cash at the yard and get mad at myself when I forget to bring greenbacks. 4 Quote
Beechwood Chip Posted November 2 Author Report Posted November 2 What's a convenient way to attach the red flag to the end of a board? Should I bring some nails? Quote
Popular Post Ron Swanson Jr. Posted November 2 Popular Post Report Posted November 2 1 minute ago, Beechwood Chip said: What's a convenient way to attach the red flag to the end of a board? Should I bring some nails? Don't overthink this one. A nail, a stapler, even a few zip ties will usually be just fine. 5 Quote
Popular Post gee-dub Posted November 2 Popular Post Report Posted November 2 On 11/1/2026 at 5:58 PM, Beechwood Chip said: What's a convenient way to attach the red flag to the end of a board? Should I bring some nails? I have a 2 inch C clamp in the backpack. A couple bucks at Harbor Freight. I C-clamp the flag to the longest board. 4 Quote
Dave H Posted November 2 Report Posted November 2 When I need to put a red flag on some lumber I have my wacker tacker ( AKA stapler) I have several, so I carry one I my glove box in my truck, I staple into the end grain... and a box of staples. I like the C clamp Idea though 2 Quote
Popular Post Beechwood Chip Posted November 5 Author Popular Post Report Posted November 5 While I'm waiting for lumber, I'm making some clamping cauls for gluing up my bench top. I decided that I wanted to make cambered clamping cauls, and curve them based on the actual curve of the bent wood. Mostly because I wanted to, and this is my hobby so I can do what I want. I have a piece of 3/4" MDF with MatchFit slots. I use this on my table saw as a tapering jig and a straight line rip jig and an extended tall fence. And now it's my cambered clamping caul jig as well. I add additional slots as needed. I start by drilling a hole in the side of the caul blank. My theory is that the top of a beam is in compression, the bottom of a beam is in tension, and the middle of a beam is just a spacer between the top and the bottom. So, you can usually drill a hole in the middle of a beam without hurting anything. This is my drill press table, also MDF with MatchFit slots. I want to repeat holes a fixed distance from the edge, so I clamp a piece of plywood to the table. This has a corner cut out in case I want to index against the corner of a work piece. Another clamp holds the workpiece just for extra safety. I line the caul up with the edge of the jig and clamp blocks to position both ends and the center. Then I shim out the ends with playing cards and clamp the center. Check to make sure that the clamps don't stick out too far. A quick run through the table saw and voila! A cambered clamping caul. Packing tape keeps the glue from sticking. 4 Quote
Chet Posted November 5 Report Posted November 5 On 11/1/2026 at 6:44 AM, Beechwood Chip said: Gloves (splinters!) But remember to take them off before firing up the saw, weird accidents can happen. 1 Quote
Beechwood Chip Posted November 5 Author Report Posted November 5 On 10/26/2026 at 9:31 PM, gee-dub said: My current workbench base is poplar Even the top? You don't find it too soft? I'm considering a different lumber yard and getting all poplar for delivery. Quote
gee-dub Posted November 5 Report Posted November 5 On 11/5/2026 at 11:01 AM, Beechwood Chip said: Even the top? You don't find it too soft? I'm considering a different lumber yard and getting all poplar for delivery. The top is two layers of 3/4 BB ply and two layers of 3/4" MDF on top of that, all laminated into one big slab. I started doing benchtops like this about 20 years ago (the top was fine on that bench, the dimensional lumber base had to be rebuilt) and the benches I've made since are done the same way but with poplar bases. 1 Quote
Beechwood Chip Posted November 5 Author Report Posted November 5 On 11/5/2026 at 3:07 PM, gee-dub said: The top is two layers of 3/4 BB ply and two layers of 3/4" MDF on top of that, all laminated into one big slab. Ah man! That sounds perfect for my needs, and I could even keep my current metal base and make the top oversize so I can clamp to it. But I was really getting psyched to do a woodworking project! Maybe I'll do that for the top and build a base just for fun. 2 Quote
gee-dub Posted November 5 Report Posted November 5 @Beechwood Chip - I don't want to threadjack so I will send you a PM. 1 Quote
Beechwood Chip Posted November 5 Author Report Posted November 5 I don't plan to add vises to this bench, but if I decide to add them later, is there anything I should build in now? For example, aprons that extend further below the table top? Quote
gee-dub Posted November 5 Report Posted November 5 I make my aprons (with the exception of the vise rear jaw support) the same height as the bench top thickness. This makes edge clamping super stable. It is always possible to cut in to the edge treatment to add a vise if you want the rear jaw flush with the edge (you do). 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.