Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

I'm in the market for a miter gauge

Featured Replies

I've never really liked the miter gauge that came with my Delta Unisaw, it always was to sloppy or to tight... it was a pain to get it just right. So I've been searching Amazon, and have been looking at the Incra miter 1000, I'm wondering if anyone here has had this... did you like it-hate it-found something better (if so what did you buy)? One thing that seems to come up as a negative is getting it set up to slide it the miter slot perfect, or most of the reviews give it five stars. I just don't want to waste money for a problem I already have. Thanks for your comments it will be appreciated. 

  • Popular Post

Hi Dave

I've had and used one for the last decade or so.  I've always been pretty happy with it. The only negative I can think of to tell you is it's a bit of a pain if you want to add an auxillary fence for zero clearance cuts, as you have to recess the knobs. (And maybe there's a better way to do this. I'm no rocket surgeon.)

But it holds its setting well and I haven't had any issues to speak of. Hope this helps! 

 

Oh, and DO NOT let that aluminum fence near the blade if you happen to have a SawStop. Ask me how I know... ;)

 

20261031_135300.thumb.jpg.26bd4e0d8373236c63578236233f108d.jpg20261031_135110.thumb.jpg.9a9c232f24472b73dc138c90fe5f0396.jpg

  • Popular Post

My saw came with the Incra Miter 1000 and the Incra Miter Express and I have no complaints.

It can be a pain to add a fence as previously said. I just drill a recess with a forsnter bit.

At the price of a Incra Miter 1000 and Miter Express you're almost at the Incra Miter 5000 which is a bigger sled.

@Chestnut reviewed the Wen miter gauge and seemed to really like it. 

I have an Inca as well and have been happy with it. That said I've largely shifted to sleds for everything but dado work (and that's just until I build an appropriate sled for that). The miter slot on my table saw is a bit oversized so any thing I use on it with a miter bar has that bar shimmed and dedicated to the table saw. So I've actually shifted my Inca to my router table.

  • Author
On 10/31/2026 at 1:56 PM, Von said:

I have an Inca as well and have been happy with it. That said I've largely shifted to sleds for everything but dado work (and that's just until I build an appropriate sled for that). The miter slot on my table saw is a bit oversized so any thing I use on it with a miter bar has that bar shimmed and dedicated to the table saw. So I've actually shifted my Inca to my router table.

I have several different sleds I use them all the time, I also use my miter gauge, It's frustrating to use I'm just looking for a replacement... thanks for all the advice Von, Ron, legenddc and beechwood chip. I think I will give the Inca will be my next gauge.

I have a Miter 5000 new in the box.  I bought it thinking it would be good for a particular job, but it wasn't quite big enough.  The starting position needed to be off the front of the table saw.  I took it out and did some figuring, but put it back in the box.  It's never seen sawdust.

I'm sure I'll never use it and don't remember even what I paid for it.  Not sure what shipping would be, but I might as well get rid of it.  I had forgotten about it until this thread.

  • Author
On 10/31/2026 at 7:09 PM, Tom King said:

I have a Miter 5000 new in the box.  I bought it thinking it would be good for a particular job, but it wasn't quite big enough.  The starting position needed to be off the front of the table saw.  I took it out and did some figuring, but put it back in the box.  It's never seen sawdust.

I'm sure I'll never use it and don't remember even what I paid for it.  Not sure what shipping would be, but I might as well get rid of it.  I had forgotten about it until this thread.

The Incra 5000 are $375 ON AMAZON, I bought the Incra 1000 it will be delivered on monday. Thanks anyway Tom, I'm sure someone would buy it in a heartbeat

Yeah, the Inca 5000 is a darn nice looking sled.  It doesn't fit my workflow or I'd be making you an offer. I'm guessing someone will.

@Dave H

I bought this one in 2024 for $82 it's now $105 on Amazon but there are other similar and maybe even better for the same amount of money.

71dZCS-390L._SL1500_.jpg

On another woodworking form there was a whole discussion call miter bar fences whether they're used on a table saw or a band saw they work relatively well..

This Sprite is from another good looking form and was talking about Christmas stuff that got into Mildred gages and miter fences in a big way.

Miter Gage discussion starts out about Christmas but then devolves into a long session of miter gages

It should be worth reading from low cost to very expensive and what other people's luck and opinions are i'm satisfied with the one I bought the time in 2024 it was a major improvement over the ones that I had.

  • Author
  • Popular Post

My Icra 1000 arrived last night, I will work on getting it dialed in today. I will critique my Incra after I've used it... my next project is segmented bowl (that should give me an idea how precise it is). Thanks everyone for all the coments.

  • Author

@Ron Swanson Jr. I've dialed in the Incra 1000 and have been Looking how to mount a wooden zero clearance fence onto the Incra I've been looking at your pictures on your mounting strategy, now I'm just spit balling here... what would taking the screws that hold the T track fence off and remove the fence, you have two slots where the screws that held fence to the T track. Couldn't you just use the slots to screw a wooden fence to the miter gauge mechanism. Or am I missing something. I had to remove the fence to access the adjustment screws on the miter gauge and I saw that the T track screws were removable... I will try this but looking at your pic's on the zero clearance fence it looked like you used to different approaches one was attached to the t track fence and, the other pic it looks ZC fence was attached directly to the miter gauge itself minus the fence. I'm just wondering if what I'm talking about doing is what you ended up doing?

1 hour ago, Dave H said:

@Ron Swanson Jr. I've dialed in the Incra 1000 and have been Looking how to mount a wooden zero clearance fence onto the Incra I've been looking at your pictures on your mounting strategy, now I'm just spit balling here... what would taking the screws that hold the T track fence off and remove the fence, you have two slots where the screws that held fence to the T track. Couldn't you just use the slots to screw a wooden fence to the miter gauge mechanism. Or am I missing something. I had to remove the fence to access the adjustment screws on the miter gauge and I saw that the T track screws were removable... I will try this but looking at your pic's on the zero clearance fence it looked like you used to different approaches one was attached to the t track fence and, the other pic it looks ZC fence was attached directly to the miter gauge itself minus the fence. I'm just wondering if what I'm talking about doing is what you ended up doing?

Hi @Dave H

If I'm following correctly, and I may not be, are you asking about simply taking the fence right out of the equation and bolting the wooden ZC fence directly ton the gauge body? 

If so, the answer is sure. You can do that. But your now wooden ZC fence isn't going to be nearly as straight as the aluminum stock fence, so I think you'd lose some accuracy and dependability by doing that. If you do want to go this route, I'd probably use like an MDF core plywood for the sac fence, or something that's comparably flat and stable. 

 

Here's a pic in all is glory. Your are right in that there are 2 different approaches shown here; but they both were mounted in exactly the same way.

20261105_163008.thumb.jpg.852f4215b0a3b034d2bd2752e54f335f.jpg

The 2 round holes on the right were the first attempt. This worked ok, but it was tough to get my fat little fingers inside them to tighten up the rather large red thumbscrew heads. 

I solved this by cutting dados instead, which gave me plenty of room for finger tightening; and I believe was a little more forgiving when drilling the holes for those bolts. Though it's been a while since I did this so my memory may not be exactly perfect. 

 

I hope this helps!

 

 

  • Author

Thanks Ron, it would be great if the zero clearance fence doesn't warp but what I would what it for is cutting segments for segmented bowls that I make, it would be great if last and stay strait but if I had to make another one as long it got me through the project I only make 1 or 2 a year for gifts mostly. I think I will give it a try if I want it to last longer I will cone up with a plan B ( like I even have a plan B ) but I'm sure I could come up with one. mostly I was just wondering if screwing the fence to the miter gauge could pose a problem to the Incra 1000, thank you for sharing you thoughts on this, I'm not wanting to do away with the T track fence it's what I want 99% of the time.

3 hours ago, Dave H said:

Thanks Ron, it would be great if the zero clearance fence doesn't warp but what I would what it for is cutting segments for segmented bowls that I make, it would be great if last and stay strait but if I had to make another one as long it got me through the project I only make 1 or 2 a year for gifts mostly. I think I will give it a try if I want it to last longer I will cone up with a plan B ( like I even have a plan B ) but I'm sure I could come up with one. mostly I was just wondering if screwing the fence to the miter gauge could pose a problem to the Incra 1000, thank you for sharing you thoughts on this, I'm not wanting to do away with the T track fence it's what I want 99% of the time.

Sounds good sir. Godspeed!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.