Recommended Posts

Posted

I have that jointer's slightly newer brother. I paid $375 for mine on sale at Home Depot.

It is far from my dream jointer, but it has always performed quite well for me.

The only thing I'd really complain about is that there is a depth guage on the machine that is close to worthless. You can barely read it and when you do it has little correlation to the actual depth, other than to be a relative reference. I would also say that setting the fence to anything other than 90 degrees is a real challenge. Fortunately I rarely do that.

Posted

I have a Ridgid jointer I bought used. When I asked Ridgid how to adjust the tables to be coplaner, they said, "they come from the factory pre-adjusted." When I said I needed to tweak mine they said, "bring it to a service center". No lifetime service agreement for someone buying it used. There are some articles online about using shims to adjust the tables, but there are no adjustment screws or cams.

I wouldn't buy a used Ridgid jointer. Even if it was perfectly aligned when you bought it, by the time you get it back to your shop it may have shifted.

Posted

All I can say is that I have had mine for 10 to 12 yrs and have never had a problem, I love it and there are countless others that feel the same way but I don't know if they are still being made with the same tolerances. Mine has an enclosed base, different handwheels, and fence adjustment; just stating to help with dating the machine. Sometimes it would be nice to have an 8" but being good with handplanes takes care of that, so does a planer sled. As for the price, I agree that it sounds high. I looked on Craigslist in our area, rural Mn. and there is an 8" Grizzly for 500 and 6" Jet for $225. That is my area, your may be different, compare it to new prices. If I were in the market for a 6" I would go after an old Rockwell, my area they are about $200 and can work circles around any newer machine and little to no vibration (as long as bearings are good, inexpensive and easy to change if needed) mainly because of all the cast iron. Just a thought, keep us posted.

Posted

Or keep looking and buy a real jointer . Not too impressed with most Ridgid tools.

I would have to agree with this. Not a huge fan of Ridgid tools. Their oscillating spindle sander is the one exception. If you want it that bad, dont pay more than $200 for it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 57 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined