Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

More on my new G0490: its not true!!!

Featured Replies

I need some help here. I put the straight edge to my jointer tables and fence individually. The outfeed table is flat, no rocking. The infeed table is .015" out from end to end, and the fence is .032" out from end to end. There are alot of chips missing on the corners of the tables, they are small but they are there. The bottom of the fence has a big valley with pitting in the cast iron. Thoughts anyone?

  • Replies 96
  • Views 20.7k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • You are making assumptions Barry... My recommendation was not based off of blind loyalty! It was based off of experience with almost every tool manufacture. Of the three jointers he listed I would bu

  • I think Barry's point was that you can get varying degrees of quality with nearly every tool manufacturer, less maybe the very very high end stuff that's out of most hobbyists' budgets. A lot of thes

  • It did occur to me that maybe the higher prices of the 5-year machines are just covering the extra warranty period. You know... so if there's a problem within the 5-year period they've already overch

Posted Images

The chips in the cast iron at the corners sucks bad since it's a brand new machine, but they're probably inconsequential. The fence can be returned and replaced easy enough. The big problem is the infeed table. Guess it depends how picky you wanna get. Unfortunately the jointer is probably the one machine where being super-picky about the flatness is probably justified. Have you called Grizzly and told them your issues?

  • Author

Yes i talked to them a few times. I sent them an email about the missing cutterhead pulley and pictures of the chips and defects. Grizzly called me back and said they sent out a pulley but thought the chips were only cosmetic. I disagree with them bc you can buy the exact machine from them for the same price without a ton of damage that you didnt get the chance to do yourself. I only checked the tables tn and found out how off they were. Im very discouraged at this point. The way i see it, i have a 500 pound christmas present that i cant even turn on and will never be as accurate as it should be. I dont get to play on christmas day

i would be requesting a replacement. it would bug me to death knowing that my infeed table was out like that. you paid too much for that jointer to have sub-par specs out of the box

  • Author

Thank you nick, i feel the same way, im like a sad kid at christmas time right now haha, broken toys, nothing to play with, hopefully ill get a sick set of pjs

Freddie-

If you are not happy with the product simply demand they take care of it. Please keep us posted im curious as to how grizzly will stand behind there product. Sorry you have been dealt these cards at christmas im still a kid at heart as well.

Thoughts anyone?

I think they sent you a "second hand" (or so called "refurbished") item. Chips on the corners, out of flat, and missing a pulley? The chips and flatness are debatable as being quality issues, but the missing pulley makes me wonder how the heck it was tested - if at all.

  • Author

Im all upest about it and my dads cracking up saying someone on the other side of the country just got a pulley in the mail hahaha

Got any pictures of the chips?

Where are the fence and infeed out of flat? Depending on where the errors are located, I may or may not push the issue. The fence doesn't need to be flat end to end, only parallel to the outfeed bed. If the infeed bed is flat near the cutterhead, you're probably fine!

I've been to the Williamsport Grizzly showroom, and have seen the actual cosmetics and fit and finish of a lot of these machines. The cosmetic chipping may in fact be normal and not at all affect the usability of the machine.

Be aware that $850 for an 8" parallelogram jointer is historically a very low price. I have a Delta DJ-20, which happened to be the last non-X5 DJ-20 in my local area, that I picked up for $1000 on a blowout sale. That was in 2001, _12_ years ago... Don't laugh, my DJ-20 was also packed in sealed boxes without a drive pulley, or the pulley guard, or the belt... ;^)

Wait for the pulley, prep some stock, and I'll bet you'll be happy...

  • Author

Im sorry cessna but im gonna have to disagree with you. The product information states precision cast iron tables, what i recieved is not up to industry standards by any manufacturer. You cant expect to truly parallel the tables with a straight edge and feelers with the tolerances all over the place like this. A grizzly rep on the phone last night agreed with me and said that their product is not usually like this, so why should i settle. 850 is inexpensive for a 8" jointer, but after shipping and ordering a shelix head with new bearings i have spent close to 1400, which is a lot in one shot for me. After speaking with a few cs reps, they seem very helpful and understanding, so i have faith that they will help me resolve this issue. I hope this all came out the right way, im just trying to explain my point of view, i see no point in settling and being unhappy.

I think it's reasonable that you pursue and expect a replacement, Freddie. I kinda have to disagree with Barry a little, too...just because their prices are lower than competitors doesn't mean they don't have to live up to the description of their own products and acceptable QC. And like Bob Dylan said, if something ain't right, it's wrong.

Im sorry cessna but im gonna have to disagree with you. The product information states precision cast iron tables, what i recieved is not up to industry standards by any manufacturer. You cant expect to truly parallel the tables with a straight edge and feelers with the tolerances all over the place like this. A grizzly rep on the phone last night agreed with me and said that their product is not usually like this, so why should i settle. 850 is inexpensive for a 8" jointer, but after shipping and ordering a shelix head with new bearings i have spent close to 1400, which is a lot in one shot for me. After speaking with a few cs reps, they seem very helpful and understanding, so i have faith that they will help me resolve this issue. I hope this all came out the right way, im just trying to explain my point of view, i see no point in settling and being unhappy.

I agree...don't settle - be firm....from everything I've heard, grizzly will make it right.

If Grizzly agrees with you that you have a defective tool, great! That's what matters.

I haven't seen the actual problem. Hence the request for some pics.

Since Grizzly does not publish a flatness spec, you don't really know if they're out of spec until the manufacturer agrees or disagrees with you. Unfortunately, "precision cast tables" can mean completely different things to different people. Since you can't actually joint wood with it because of the missing pulley, you can't determine if the machine is flat enough to make it fit for the advertised purpose.

As food for thought, I may closely examine some of my tools this weekend.

  • Author

Im expecting to hear from them today, the supervisor working on my order was out yesterday, hopefully ill have more news for later on tn

I have been reading this thread to see how your customer experience has been going, because I am planning to make a purchase from Grizzly in the future.

I'd like to know how you feel about their customer service after your problem has been solved - if it gets solved.

  • Author

Can someone explain to me what grizzly means in the description online that this tool is available in csa certified versions by request?

CSA supposedly tests and certifies products for "quality and safety," but I'm under the impression that it's more about the latter, for commercial use...insurance and licensing and what-not. You should ask Grizzly when you call them back this morning, all pissed off that you didn't get that promised call back yesterday. You're having a very different customer service experience than I've ever had with them.

I know how excited you are to put your new toy to work however this is that time of year with the holidays looming, unpredictable winter weather and the dreaded flu season when things don't always happen with the expediency we would like. Having dealt with Grizzly customer service in the past I have no doubt your issues will be addressed to your satisfaction.

I have to agree with Barry on a few points though, the fence is not a big deal other than the appearance. As long as it is parallel to the bed and not twisted, the cupping will have no effect on the jointing operation. The bed could be an issue depending on where the cup is located but as long as it is confined to the infeed and closer to the center of the table 0.015 will not effect the operation either. The outfeed table is critical but 0.015 would be hard detect. The dish or cup in the bed would also not effect the ability to bring the tables into coplaner which is what you are really doing, as long as the cup is located in the center and/or not at either end.

That said you paid for a new piece of equipment and the customer is always right. Again, I'm sure that the people at Grizzly will do everything they can to make you a satisfied customer, hopefully sooner rather than later.

Good Luck and Happy Holidays!

Jim

  • Author

The fence does not read square along the tables entire surface.

The big grizzly catalogue came and i was flipped to the page of my jointer while on the next page was the g0495x, yea i was checking her out haha. It says its made in a iso 9001 factory in taiwan. So what does that in terms of a promised better quality, fit finish etc.?

I've wondered the same thing about iso 9001 here is what I found.

The ISO 9000 family of standards is related to quality management systems and designed to help organizations ensure that they meet the needs of customers and other stakeholders[1] while meeting statutory and regulatory requirements related to the product. The standards are published by ISO, the International Organization for Standardization, and available through National standards bodies. ISO 9000 deals with the fundamentals of quality management systems,[2] including the eight management principles[2][3] on which the family of standards is based. ISO 9001 deals with the requirements that organizations wishing to meet the standard have to fulfill.[4]

Third party certification bodies provide independent confirmation that organizations meet the requirements of ISO 9001. Over a million organizations worldwide[5] are independently certified, making ISO 9001 one of the most widely used management tools in the world today. Despite widespread use, however, the ISO certification process has been criticized[6][7] as being wasteful and not being useful for all organizations.

  • Author

I talked to a rep today and she confirmed my G0490 is made in china, while the G0495x is made in a iso 9001 factory in taiwan. Although much steeper in price, she assured me it is a superior machine and has much higher standard in the qc department. Ive been stressing over this whole ordeal this week, and part of me wants to just shell out the extra money and buy the 495x and be done with it. Leaving no wiggle room, i will be officially broke after the holidays, decisions decisions.

Take it with a grain of salt. I own four Grizzly machines, and the only one I've had a problem with was the one made in Taiwan at an ISO9001 factory. It's a crapshoot, man. Every big power tool company is imperfect. I remember Marc telling a story about going through three rounds with Powermatic to get a flat table for his PM Custom.

Remember...

ISO standards only relate to documentation of process, and meeting a stated customer standard. We, the end user woodworker, aren't the factory's customer, Grizzly is... Since we have no access to the actual standards set forth by Grizzly, the fact that an item is made in an ISO standard factory is meaningless.

I've dealt heavily with ISO standards, as well as Six Sigma projects, at my "real" job. Beyond marketing fluff, most ISO or other QA stuff is very dependent on who defines the standard, and what that standard actually states. It can be GREAT, garbage in, garbage out, or something in between. Often, the standards include a statistical component, something like 97% of parts will meet "X" standard. Outside of stuff like defense or aviation, it's rarely 100%...

What happens to the parts out of standards is where customer service comes in. Repairing or replacing the parts out of spec is priced into the cost of a specific standard from a specific factory. If you feel your machine will not perform as expected, keep after them. Lots of marketing and advertising materials conveniently leave out enough specification information to be useful.

The bottom line is not that we get a tool that meets some arbitrary measurement, but one that is suitable for the advertised task. This isn't a knock on Grizzly, I've yet to see any woodworking machine provider who publicly shares information like standards of "flat" for a table, or "wind" for a fence.

I hope you quickly get to a point where you're making great stuff!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.