Recommended Posts

Posted

the guy seems like he knows what he is doing and he has all the right tools. i have never heard of anyone who does this but that does not necisarly mean anything since im a novice. talk to him maybe you can arrange some security like he gives you a security ransom that you return when job is complete. i doubt it. probably all you can do is trust the guy.

Posted

My reserve would be personal, he laps the sides taking away all the patina in the metal. I like my old planes to have nice flat bottoms for function but look their age, the only exception is the plane I use for the shooting board. I have some planes that were my wife's grandfathers and I cherish their heritage, to me it would be a shame to loose the look-but that's my opinion.

Have you ever flattened a plane bottom before? It does take some time but if you throw on some tunes and let your mind work on your next project it really isn't too bad-my opinion again. I have also brought my flattening plate in the house on a scrap of plywood and worked on a plane while watching tv a couple times. Just a couple thoughts in case you don't feel comfortable sending yours in.

Posted

Nate, that's actually why I need to have the no 7 done, because I tried to flatten the sole myself and butchered it badly. At this point is it a large paperweight not capable of flattening or straightening anything.

Posted

Ah I see. The longer the plane the easier it is to get off. If you wanted to try again maybe doing a #4 or similar would be easier to get the hang of it. $80 is a small price to pay to have your great grandfathers plane resurrected. If the patina is something you like you could always ask to just have the sole lapped, it it doesn't matter to you than that's fine too. As far as butchering it, live and learn-right. I am sure your GGdad would be very honored that you are treasuring his old plane so much. Keep us posted on how you turn out, ok.

Posted

TablesawTom sales lots of planes on woodnet.net. Little over a year ago I found a Keen Kutter K8 and posted my find on Woodnet. I found out TablesawTom was putting together a full Keen Kutter collection and he needed a K8. I exchanged my K8 for a K5 and block plane that he had restored and ground. This is an amazing plane and he did a good job.

Go to woodnet.net and you can see many of his posts.

Posted

Hi

 

Complete noobie and lurker here at the site. As happenstance would have it, I just received in the mail three planes in the mail that Tom flattened for me -- a 2, 3 and 4.  The results were everything promised and the service was great.  These are user planes not collector items at all, so I wasn't worried about saving "patina." I wanted flat bottomed planes without having to spend hour and hours in front of sand paper.    There is enough patina in the handles to cover that angle.  I could only afford to do three at this time, but when money is more available, I'll do my other 4, my 5, 6 and 7,  I think it took three weeks to send my planes, for him to flatten them and send the planes back.  Shipping (USPS) back and forth took at least two of those weeks.  He packed the planes exactly as I had and completely followed my directions regarding insurance.  I do no heistate to recommend him at all. 

 

Good luck!

 

Greg

  • 1 month later...
Posted

Just wanted to update after sending Tom a no 5 and no 6 a few weeks ago, I just got them back yesterday, and was totally blown away, I mean they look like brand new tools. The sole and sides are nice and shiny, and whatever he did to clean up the top of the body was impressive too. I still can't believe how good they work, I haven't had time to set them back up, but if they work half as good as they look, I'll be in good shape. I'll definitely be sending out my no 7 next.

Posted

hmmm little pricy for the quality of planes i got  if they were nicer tools then it would be worth it but there realy not that great of planes they are just something to get the job done. 

 

thanks though

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.