rodger. Posted April 12, 2013 Report Posted April 12, 2013 I am interested in buying a spokeshave to clean up glue and such on laminated panels, as seen in one of Marc's podcasts. Is the low angle spokeshave suitable for this? Ot should I go with a different model? Quote
Vic Posted April 13, 2013 Report Posted April 13, 2013 You'd have to be more specific on which of Marc's videos. I found my No. 80 cabinet scraper ideal for cleaning up glue on laminated edges. Quote
Bob Rozaieski Posted April 13, 2013 Report Posted April 13, 2013 I'm not a fan of their low angle all metal shave. I had one and could never quite get it to work like the old (and new) low angle wooden shaves. Their high angle (Stanley style) shaves are really nice though. If you get one of those go for the flat sole. The others are more specialized tools. Alternatively their wooden spokeshave kit is really nice and makes a pretty nice low angle wooden shave. Quote
TheFatBaron Posted April 13, 2013 Report Posted April 13, 2013 The low angle one is really prone to tearout if you're not careful. I'd say the standard flat is the one to go... but if you're cleaning up glue lines, why not get a scraper instead of dinging up nice blades? Quote
Barron Posted April 13, 2013 Report Posted April 13, 2013 Second (or third) the scraper. The Veritas cabinet scraper works great on glue clean up, and if set up right, does a great job scraping large panels, table tops, etc. I also think it might be easier to use for glue clean up then a spoke shave. I have had mine for a while, so this may have changed, but I think it's cheaper, as well. Quote
ChrisG Posted April 15, 2013 Report Posted April 15, 2013 For cleaning up glue I'd use a scraper, not a spokeshave. I actually quite like the LV low angle shave, but I mainly use it for fairing end grain curves. IT works OK on hardwood longgrian too, but becasue of the low angle you do really need to pay attention to grain direction to avoid tearout. The boggs shaves are nice but really intended for fine finishing work..very tight mouths. I've never used the BD LV shaves, but that's what I'll be getting when I find myself needing more than just my LV LA shave. Anyway, having at least one shave is really nice...but for removing glue I'd just use some type of scraper. I'm wondering if perhaps Marc was using the LV No. 80 scraper on the video and perhpas you mistook it for a spokeshave? Quote
TerryMcK Posted April 15, 2013 Report Posted April 15, 2013 For cleaning up glue I'd use a scraper, not a spokeshave. I actually quite like the LV low angle shave, but I mainly use it for fairing end grain curves. IT works OK on hardwood longgrian too, but becasue of the low angle you do really need to pay attention to grain direction to avoid tearout. The boggs shaves are nice but really intended for fine finishing work..very tight mouths. I've never used the BD LV shaves, but that's what I'll be getting when I find myself needing more than just my LV LA shave. Anyway, having at least one shave is really nice...but for removing glue I'd just use some type of scraper. I'm wondering if perhaps Marc was using the LV No. 80 scraper on the video and perhpas you mistook it for a spokeshave?Yes i believe the video may have been the bed headboard segment - Pug is that the one you meant? He may have been using a scraper plane that resembles a spokeshave Quote
TheFatBaron Posted April 15, 2013 Report Posted April 15, 2013 For cleaning up glue I'd use a scraper, not a spokeshave. I actually quite like the LV low angle shave, but I mainly use it for fairing end grain curves. IT works OK on hardwood longgrian too, but becasue of the low angle you do really need to pay attention to grain direction to avoid tearout. The boggs shaves are nice but really intended for fine finishing work..very tight mouths. I've never used the BD LV shaves, but that's what I'll be getting when I find myself needing more than just my LV LA shave. Anyway, having at least one shave is really nice...but for removing glue I'd just use some type of scraper. I'm wondering if perhaps Marc was using the LV No. 80 scraper on the video and perhpas you mistook it for a spokeshave? Yeah, that looks like an updated version of the old Stanley #80 cabinet scraper that you can find everywhere. Quote
rodger. Posted April 16, 2013 Author Report Posted April 16, 2013 You guys were correct! It is a scraper. I was watching this episode, and the spots is at about 3:35. http://www.thewoodwhisperer.com/videos/arts-crafts-table-part-3/ Quote
rodger. Posted April 16, 2013 Author Report Posted April 16, 2013 Is this what I am looking for? http://www.leevalley.com/en/wood/page.aspx?p=46266&cat=1,230,41182,68491 Quote
TerryMcK Posted April 16, 2013 Report Posted April 16, 2013 Is this what I am looking for?http://www.leevalley.com/en/wood/page.aspx?p=46266&cat=1,230,41182,68491 Yes 1 Quote
Eric. Posted April 16, 2013 Report Posted April 16, 2013 my adress is. rechealcumii@yahoo.com my name is rechealcumii i am a young sweet looking girl with full of love clarely also romantic,well ,i think we can click together please i will like you to email back through my email adderss rechealcumii@yahoo.com contact me directly to my emailbox.at the same time i will show you my photo and you also know more about me Dayum! Badonkadonk! Sign me up girlfriend! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.