Recommended Posts

Posted

Tony, you are spot on. It's nothing special. It's a smoothing plane. Like eric says, they are often called a coffin smoother or coffin plane. Used in the same way we would use a #4 plane these days. I remember trying out wooden planes when I just left school. They seemed really weird. Tried some again in my lunch break at work and they were good fun. 

 

Darren, you are right, the do require a light blows with a mallet/small wooden hammer to set them. I'm no expert with them but they seem to work just fine.

All the early 20th century books I have on joinery/woodworking always have wood planes and metal planes. Once the metal plane were cheap enough wood planes faded away. 

 

Eric, they are not so dissimilar to krenov's planes, although his are much more beautiful and use a different blade restraint, still need to hit them though  ;)

Posted

Nice. It would be interesting to see how you get on with it. I was in a pub in Gloucestershire recently and they were being used as wall decorations along with a lot of dangerous looking agricultural implements.

Posted

Coffin plane.  Why they're built like that and what they're useful for is still a mystery to me.  Hopefully Graham can explain it.

 

They are curved on the side like that (coffin shaped) to maximize end grain so that the small amount of wood in them will react better to climate changes (or so I've read).

Posted

I have my grandads old wooden smoother, unfortunately it has cracked on the side from the pressure of the wedge. Im not sure if the plane served on HMS indefatigable like my grandad but it dates from around then. Must get it up and running. I also have a wooden badger plane and someday hope to get a full set of woodies, they are great to use.

  • Like 2
Posted

Looks like a nice little plane, and at that price you really can't go wrong. If it doesn't live up to your expectations on the bench, I'm sure it would look good up on the wall, too.

Posted

Looks like a nice little plane, and at that price you really can't go wrong. If it doesn't live up to your expectations on the bench, I'm sure it would look good up on the wall, too.

 

My thoughts exactly. Marples is a good brand so it should be just fine.

Posted

Oops I did it again!

 

$(KGrHqVHJBMFGwUuYIzIBRsF-krJsQ~~60_12.J

 

Next week should be calmer so I wont need to take out my woodworking frustrations on e-bay. I look forward to finishing my #4 refurb, updating the blog and getting on with that bench real soon.

  • Like 1
Posted

Oops I did it again!

 

Next week should be calmer so I wont need to take out my woodworking frustrations on e-bay. I look forward to finishing my #4 refurb, updating the blog and getting on with that bench real soon.

Is that before or after you've finished reading those books? Can you get more than 24 hours in a day on ebay too? (Free postage hopefully). :D

 

Of course without the fifth volume you'll still have some difficulties. That's the volume Roy Underhill read to learn 'the one secret of woodworking' - fortunately he explained it in a

(09:10).

 

John

  • Like 1
Posted

Hello John,

 

25 hours arriving tomorrow  :). Great vid BTW. Only seen that style of bench hook in the books before. Good to see someone using one. Really like to see the way Roy used it for cutting a mortice. Always makes me cringe when I see a mortice chopped in a vice rather than the bench top. Good job Roy!

Posted

Hello John,

 

25 hours arriving tomorrow  :). Great vid BTW. Only seen that style of bench hook in the books before. Good to see someone using one. Really like to see the way Roy used it for cutting a mortice. Always makes me cringe when I see a mortice chopped in a vice rather than the bench top. Good job Roy!

 

Out of curiosity, why? Assuming the wood is properly secure and the vice properly installed, does it matter aside from the risk of breaking the vice if it's poorly installed?

Posted

TFB, I guess it's only personal preference. It feels right to me to have the stock secured to the bench, above a leg rather than pounding a vice. Remember my brain is that of a joiner so when I think about morticing it's larger scale stuff like doors & windows. For that work a bench top gives better support. Furniture scale stuff on the other hand would be fine in a vice and I guess the extra support a vice would give to the mortice cheeks would be a good thing.

Posted

OK so both items arrived. The lucky dip that is e-bay did throw up a surprise. The wooden plane is a 1 1/2 a little baby. Almost like what I would assume a #2 metal plane would be. Could be useful for small work but it did feel a bit like a toy.

 

The book, wow, awesome. I kinda don't no where to start on these bad boys. I have mainly old Joinery books published between 1902 > 1970s. Quite heavy going an aimed squarely at an apprentice or as a reference book.

However "The Practical Woodworker" is a very different beast. I would go as far as saying this could be the ultimate hand tool & basic machine book. 

I am staggered to see the diverse amount of projects.

 

From rabbit hutches to aeroplanes, yes, a real aeroplane

 

Shoe shine boxes to queen anne chests of drawers 

 

Elizabethan tables to wooden baths

 

Pattern making to Coal bunkers

 

There are designs for 3 or 4 tool chests. The "Woodworkers' Tool Chest" is almost exactly the same as the Schwarz's version, I might even say it looks the same! Right down to the the drawers, how they run, the moldings, opposing dovetail plinths and how the top is made. In addition you get a pattern makers chest, a portable chest.....

 

Four or more bench designs, loads of work holding ideas, tons of vice designs.

 

I'll stop now before I explode! Right now

:D

 

If you like traditional woodworking and you see this book, do not hesitate buy it! I would even go as far as say if you want to get into woodworking find these goldmines. Mine were £25.00 + delivery. My best ebay purchase ever. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.