Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Tiny workshop ideas

Featured Replies

Guys, I'm redesigning my tiny workshop (10' x 12') and I'm looking for ideas.

 

The only big-ish piece of equipment I own at the moment is my 6" 4ft jointer which sits on a mobile base. Everything else is small and portable. I'm planning to center my workshop around a work table slash bench. It will be a torsion-box based 3.5'x5' bench with two beefier adjacent edges so I could drill some dog holes it them and attach a vice. I also want the bench to mate with the table saw (is there THE standard hight for TSs?) and include storage for my shop vac, planer, track saw, etc. Ideally, I'd like to be able to break the bench apart and move outside when I need to work on bigger projects. Any ideas and tips would be appreciated!

"standard height of table saw"

While I have not delved into the facts and figures of each saw, I think they are all ABOUT 32 to35 inches. The best way to plan is to decide what saw you want then design around it, unless you make the legs of the table adjustable so it can move up and down a few inches, then you could get the table close to the saw height, possibly a little low.

 

I have seen tables that use a hyd jack to raise and lower. The legs telescoped into each other and had lock screws on each leg but that may be a whole lot more work than you want to get into. Another advantage of doing this though is that you could put the wheels on the lower frame so that when you moved the bench it is on wheels and when you put it in place, it is solid to the floor. Just something to think about. I don't know your skills and tools available to take on such a task.

 

Like Jason said, put as much storage as you can on the walls. Don't forget overhead too. If the roof structure can take it, overhead is a good place to put oversize items or long items you want to get out of the way.

I have 1/3 of our double garage as my shop. And until recently it hasn't really been dedicated to woodworking. However I have now started segregating the space. Separating woodworking tools from others etc...I'm already noticing improvements in productivity and quality. Currently making a small bench for my bench top tools and to provide some additional worktop space, it will be on lockable castors for mobility. With some open storage underneath for furniture parts or tools to clear the top for assembly. I've got drawers on metal runners under my main bench and these pull all the way out maximising the storage and providing good access. Also I'm a big fan of my tool till, has saved a number of tools when things got crowded.

+1 On separating home improvement stuff from woodworking stuff.  In my case, both are still in my garage, but I finally got them separated into separate storage areas.  I even moved my 10" CMS over there as it almost only gets used for rough dimension work and home improvement work.  I do the rest on the TS.

One thing that would help a lot, I think, are custom-made flip carts.  I have one for my miter saw.  You could put a second tool on the other side of the 'flip' if you like, but the key idea is to make the pivot point such that the deck of the tool is aligned with a nearby bench you will use it with.  Allows you to use the bench as "extension wings".  I do that with the miter saw using about 16' of bench to the left.  In my case, I have one tool on it, the other side is the ever-popular horizontal surface to use as a bench.  Definitely strong enough; two burly garage door repairmen jumped up on it before I could say "be careful" and it didn't wince.

 

Here's how I made mine:

 

http://www.halfinchshy.com/2010/05/disappearing-miter-saw-stand.html

One thing that would help a lot, I think, are custom-made flip carts.  I have one for my miter saw.  You could put a second tool on the other side of the 'flip' if you like, but the key idea is to make the pivot point such that the deck of the tool is aligned with a nearby bench you will use it with.  Allows you to use the bench as "extension wings".  I do that with the miter saw using about 16' of bench to the left.  In my case, I have one tool on it, the other side is the ever-popular horizontal surface to use as a bench.  Definitely strong enough; two burly garage door repairmen jumped up on it before I could say "be careful" and it didn't wince.

 

Here's how I made mine:

 

http://www.halfinchshy.com/2010/05/disappearing-miter-saw-stand.html

I like the flip cart Paul-Marcel and your blog too :)

I've had some several different shops over the years some were small, one thing I've done in the past was make a fold down work bench now mine was just a solid core door hinged to the wall with folding legs you could do something like that to free up space when not in use.

  • Author

Thanks for all the great ideas. Keep 'em coming!

 

I got rid of all the extra junk and non-woodworking related tools and it is already much better! Next, I'm going to build some skinny storage cabinets on two walls. I'll post the pictures later.

hey George here is my shop newly updated this post shows my shop build from start to finish

 

this is a mini router I built

  • 2 weeks later...

There's a couple of magazines you could look at that have options for you.  I picked up one this past winter that had some great ideas, and a couple that I wish they had gone into more detail on.  (One was a shop roughly 8' x 10', but the only photo was a shot of the guy standing in the doorway, blocking the light and view of the interior.)

 

I don't remember the name off hand, but I believe it was Wood's Small Shop Setups, or something like that.

 

One other one I've seen (I think from Taunton?) they featured the shop twice in different publications.  The guy runs a shop out of something like a 10' x 12' shed (been a while, so don't hold me to those dimensions).  Don't remember the planer he has, but I believe the 8" jointer was on a mobile base and had a pair of moulding strips tacked to the floor to allow it to move only straight out from the wall.  It tucked up under cabinets with a work surface that was deliberately created to be just over the tool (so it became a nested storage item when not in use).  The table saw had an extension wing with a router built in, and it was at least an assembly table if not the whole workbench.  Don't remember the rest of the details about it, but I do remember the author mentioning that occasionally the wood working happened outside.

 

So do not be afraid to take over "common space" for a job here or there.  (I used to break down plywood on the porch... now I do it on the common steps in front of the building.  If I hadn't planted a garden in containers on the porch, I'd still be using it.)

  • 3 weeks later...
  • 2 months later...

Finding things geared to our size shops is pretty hard. Mine is about 11.5' square. I started my journey about two years ago and I'm nowhere near done, mostly because the ideas I come up with end up being changed six months later for a different idea.

 

I do feel qualified to offer some advice though:

 

-Never say never. You may see an idea that you think you'll never have to resort to, but you'll build it two years later.

-Never waste space. Ceiling joists, wall cavities, the dead space behind static tools - it all can be used to some purpose

-Build your storage to a standard and modify it from there. Nothing worse than to have to rebuild cabinets or other fixtures because you want to try a different idea later.

-Explore external options - dust collectors, vacs, wood storage all have the option of going outside in a lean-to if code and space permit.

 

I once thought my space was plenty big enough but then I started adding big tools that I got good deals on. Now I'm fighting for every inch.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.