Recommended Posts

Posted

Hey there! I picked up a Stanley Sweetheart 45 off eBay, and it arrived today! It is in incredible shape. It has two sets of cutters in the box and some loose cutters too. Also has the original box. A welcome surprise... There was a hand written note with a plan on it, that looks like it was written many years ago. Very cool!

 

I took the plane apart, and cleaned the rods up to make them slide more smoothly. There is very little rust, and everything appears to be there (minus one nicker). It even has the little screw driver :) There is a wooden block, that I don't know what it's purpose is.

 

I couldn't help but to throw a piece of pine in the vise and make a cut. Even though the face of the board wasn't flat, it still cut very nicely.

 

1094936_10201675857966405_1308307019_n.j

 

1002501_10201675858326414_625244917_n.jp

 

 

994881_10201675858646422_189929397_n.jpg

 

1002903_10201675858806426_1045031612_n.j

Posted

Nice one Mel. I don't have a #45 but have a #50 combination plane (very similar). I found it had a very steep learning curve and was quite difficult to use at first. Lots of practice on scrap has honed my skill on it though. I found taping a pencil or dowel to the handle so it points upwards enabled me to keep the plane true as I was getting the tendency to rock about when moving forward. One less thing to think about - push with right hand - hold left hand against the fence - transfer weight from one leg to another - tongue hanging out? put it back in to stop looking like a dork - balance glasses on nose - have I got it square? You get what I mean :)

  • Like 1
Posted

I have a collection of old tools but nothing of that level ! Beautiful find !

I have a tongue and groove plane with a fence that switches which way you are cutting. Even with a razor sharp blade they are a challenge to use. Clean straight grained soft wood and practice help.

Posted

A great tool Mel. I have the Stanley and the Record versions 

 

Vintage-Plane-Hardwood-Windows.jpg?resiz

 

These were a real boon when they first came out. You can rebate, mould and groove with one tool. I found it a bit of a fiddle when compared to just a standard plough or rebate plane but soon got the hang of it. Enjoy your new purchase.

 

You probably know already but start the cuts and work backwards gradually rather than trying to hook one long shaving to start.

Posted

I just spent some time sharpening the cutters for a 1/4" tongue and groove. After realizing how this thing works, I was able to make a very nice joint with minimal effort.

I first had one skate off the work, which led to a deep cut, then I had the iron advanced too much. (Bad combination) :)

After I realized what to do, its awesome!

I cut the joint in ribbon mahogany. That was a real test! I'll post pictures later.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.