Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Mahogany Stain on Poplar

Featured Replies

My father just finished building a bed out of poplar for my son complete with headboard, side rails and footboard. Junior wants it stained a classic red mahogany color and I need help.

Should I precoat with a 50/50 shellac/denatured alcohol mixture or use a different mixture/product. How many coats should I use prior to staining? What type of stain should I use - oil base, gel, water base dye, etc.? Brand preference - Sherwin Williams, Minwax, others, etc.? Preferences on topcoat(s) after staining?

I don't have spray equipment so the job will be "by hand". I'm "pretty handy" but am relatively new to wood finishing so any help is greatly appreciated. From my research, it looks like I'm in for a difficult project as poplar doesn't take stain consistently, but I'm up to the task.p

Thanks in advance for everyone's help

You can skip using the shellac if you use a gel stain as it penetrates evenly. Though if you do decide to use shellac just apply the stain after the shellac. Ideally one coat of shellac works. Top coat with whatever product you'd like. I'd suggest a water based varnish for you.

I am by no means a finishing expert. But poplar is likely to blotch. Probably less with a gel stain, but I would bet that there would still be blotching. I would probably look into Charles Neil Pre-Color Conditioner. I have yet to hear someone say that it didn't work for them. Then I would probably use a dye, or gel stain. I personally would probably use a dye, just a personal preference, but as long as the gel stain is compatible with the charles neil pre-color conditioner, I am sure it would also work. Just my .02

  • Author

I plan to use the Charles Neil Pre-Color Conditioner.  I just emailed Charles about my project as I hear he gives great advice and has prompt responses.  Watching his videos, it looks like water based dyes work best with his product.  Does anyone have brand preference on the dye?  In the video, George is using General Finishes.  Anybody have ideas about top coat(s)?

 

Thanks - Mike

No good suggestions to offer here, but an additional question for everyone. Can anyone provide a good solution for eliminating the naturl greenish cast that poplar tends to have? I can never seem to achieve quite the shade I want when staining poplar, because of this green. It's like watching TV with the color saturation out of adjustment, it just looks a little off.

Thanks

As far as the green hue of poplar, I am sure you could bleach it out. Maybe use something like a yellow dye to start to even out the greenish hue before applying the mahogany colored dye. But you would have to test is to see what using yellow dye as a base would do to the overall look.

 

I have used transtint dye. I'm not a big fan of the general finishes premixed dye. I'm not sure what exactly, I would just rather mix it myself...

Use a dye. Pigment stains don't typically work as well on poplar. As for the green color, a red dye will kill it and turn it brown. Look at a color wheel. Any time you want to mute one color, use the color opposite it on the wheel. In this case, red is opposite green. Here's a poplar table done with Lockwood Red Mahogany dye and top coated with shellac.

http://logancabinetshoppe.com/uploads/photos/furniture/porringer_table05.jpg

I had to dye some poplar a while back.  The Lockwood dye is what I used too, worked very well.  Check out this thread:

 

Try these schedules on cutoffs, then pick which one you like....

 

CN's blotch control

Let Dry

Second coat of CN's Blotch Control

Let Dry overnight

 

Deep Mahogany w/ some Red

GF Water Based Dye - Orange

Let Dry

GF Water-based Stain - Rosewood

 

or

 

Brown Mahogany

GF Amber Dye

Let Dry

GF Medium Brown

 

or

 

Dark Brown Mahogany with a Deep Red Tone

GF Amber Dye

Let Dry

GF Rosewood Stain

 

Then

Let Dry Overnight

Shellac to seal-in the colorants

Top coat as desired

You dont need a blotch control just use the right carrier. Lacquer thinner and transtint or lockwood dyes work well without blotching.

 

No good suggestions to offer here, but an additional question for everyone. Can anyone provide a good solution for eliminating the naturl greenish cast that poplar tends to have? I can never seem to achieve quite the shade I want when staining poplar, because of this green. It's like watching TV with the color saturation out of adjustment, it just looks a little off.

Thanks

Definitely not a pro here, but if you set it in the sun, it turns a nice light golden brown. I don't know how deep it goes, so I would wait until it's sanded.

I had to do that once for some small jewelry display cases. I already had the wood cut (we were making a number of them in hopes to sell), assuming the customer was going to order a stained finish, and instead they ordered clear. So I just let it sun bathe for a few hours, and mostly while I was working on other stuff. Turned out nice.

Also, I found that the green shows through Minwax Dark Walnut and makes a turdy brown, and the Minwax Red Mahogany, it almost completely neutralizes the red and makes a nice dark brown.

I know how deep it goes. Approximately 1/4" per 150 years. Deep enough but with thicker stock you can still find lots of green in boards that do not see much sun. Most old homes around here are framed a sheathed with the stuff and I have cut miles of it :-) You'll have to judge your son's temperament but I would not act drastically. Pick your finish schedule and forget about the green. With a year's time in interior space that has a window, enough UV exposure will have occurred to have significantly converted the green even through the finish. My dad trimmed some of his house this way and it was sorted in a year to a year and a half. It only looked goofy for the first month or so when the stain program and the green conflicted. The guys suggesting a glaze will get you a great short term color, but I would not choose a glaze for a bed of an active individual. When the glaze gets damaged, the color difference is stark and the flaws jump at you. I prefer for this reason to keep glazes away from foot level. Just my personal leaning, I play on a lot of glazed pianos.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.