Recommended Posts

Posted

actually its prity good I was able to close my pinky all by itself so it can touch my palm.   I will be back to normal or what passes for normal by the end of the month. Might be a little weak but still good to go.  had a small set back where my finger was drooping so I had to get a splint to support my finger while it heals.  right now im back to turning and back to carving in fact im working on a couple bowls and a mask for next month thought it would be fun to wear it for Halloween.  don't tell marc but its of him :)   not realy but it is scary

  • Like 1
Posted

Great video. I love the mix of ancient and modern technology.

 

what ancient that basically how they still do it they might use a electric saw to cut the steel but they still heat it up and hammer it out in a very similar fashon

Posted

it's kind of like wood working.  The concept is the same, but the equipment upgrades (periodically).  blacksmiths do have power hammers (often called trip hammers) to work the metal faster.  (it's kind of like the table saw compared to a rip saw.  but the price doesn't quite compare to one.)

 

People look at blacksmithing like it's a difficult thing to learn, or there are mystical things involved.  If most of you look back to when you started wood working, it's the same feelings and steps.  Skills start small, and you don't buy the whole shop up front.  (There's actually a lesson in a couple of books.  You start by owning a pair of tongs or vise grips, and you make the tongs you need for the next job.  In fact, molding the tongs to the shape of your stock is simple, now that you know how to make tongs.  Sounds familiar, right?)

  • Like 1
Posted

what ancient that basically how they still do it they might use a electric saw to cut the steel but they still heat it up and hammer it out in a very similar fashon

 

Ancient because the Iron Age started about 3000 years ago and wood carving is much older still. I just meant that the technology has been around for a long time, not that it's obsolete. Laser engraving, on the other hand, is much newer. :)

  • Like 1
Posted

I was recently looking at a article about how crafts men would sign there their work with acid rather then a laser. it was interesting that even though they didn't have lasers that they had the same accuracy with chemical.

Posted

It wouldn't hurt to shoot of an email to ask if there was any way to get a line of bench chisels going. I know where i'm getting my drawknife and froe from though. Graham stop spending my money.

  • Like 1
Posted

actually its prity good I was able to close my pinky all by itself so it can touch my palm.   I will be back to normal or what passes for normal by the end of the month. Might be a little weak but still good to go.  had a small set back where my finger was drooping so I had to get a splint to support my finger while it heals.  right now im back to turning and back to carving in fact im working on a couple bowls and a mask for next month thought it would be fun to wear it for Halloween.  don't tell marc but its of him :)   not realy but it is scary

Good news Duck  :).

 

Mkirby, I have already done so. Although when checking out their site they seem maxed out on their existing product line so I doubt we are going to see any new product soon  :(. If I get a response I will let you know. 

Always happy to help a fellow woodworker spend their hard earned. 

Posted

Yeah they look pretty busy which is good for them. I don't know of any one in blighty doing this kind of thing. I love my Ashley ills stuff but i want something more like what theses guys are making. 

Posted

Yeah they look pretty busy which is good for them. I don't know of any one in blighty doing this kind of thing. I love my Ashley ills stuff but i want something more like what theses guys are making. 

+1 On that M. I will do a bit of searching and see what I can find. If you find something be sure to give me the heads up.

Posted

The part that gets me is near the beginning when he's forming the round end for the handle.  He has one end of the piece glowing red and is holding the other end in his bare hand while he's working it.

 

I've actually seen this video before.  You may have noticed it's part 2.  It's worthwhile to go and watch the other two videos.  He makes the axe in one them.  It's been a while so I don't remember the content of the other.

Posted

What a nice joint displayed behind that socket. Does this mean your old tools pile is also in the mezzanine? :-) I am really impressed with the larger scale of logging tools and implements. After catching the videos coming out of Eastern Europe, I also have been impressed with Paul Sellars work with small hatchets and axes recently. I am struck not only with the processes that go into making specialty tools in the traditional way, but also with the things possible with creative repurposing.

Posted

Glad you like it C. Oh yes, the mez has old tools, a campaign chair, old hand made nails, screws, scales, my shop, hand made glass, old ironmongery and a heap of other left over bits and pieces.

C, you might of caught this vid already, if not you will most likely enjoy it.

Byrdie you are always welcome if you ever find yourself in the UK, I will just remember to frisk you when you leave  :D

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 45 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined