Allen Posted September 27, 2013 Report Posted September 27, 2013 In a debate whats the best router bit ? Quote
Trip Posted September 27, 2013 Report Posted September 27, 2013 ==> whats the best router bit ? A Shaper Cutter... 1 Quote
rodger. Posted September 27, 2013 Report Posted September 27, 2013 My most often used lately is a 1/2 inch rabbiting bit ( with bearing). But, it's hard to beat a cope and stick set, or a raised panel with back cutter, or a spiral up cutter, or a pattern makers bit, oh jeez...I can see the debate being difficult. Quote
Carl Olsen Posted September 27, 2013 Report Posted September 27, 2013 The big daddy of course How you cannot love that bit, its the sexiest. http://shop.wnwoodworkingschool.com/Big-Daddy-Pattern-Bit-Big-Daddy-Pattern-Bit.htm 1 Quote
CT Proctor Posted September 27, 2013 Report Posted September 27, 2013 The one your currently using. 1 Quote
Andrew Pritchard Posted September 27, 2013 Report Posted September 27, 2013 The one your currently using. I was going to say the one you use the most Quote
wdwerker Posted September 27, 2013 Report Posted September 27, 2013 I really like my Freud quadra cut round over bits. They save me hours of sanding because the cut is so clean. Whitesides are damn good bits as well. Quote
Trip Posted September 27, 2013 Report Posted September 27, 2013 ==> Freud quadra cut round over bits At first, I thought it was just a marketing gimmick -- then got one --- cleanest-cutting round-over that I've ever used... ==> big daddy yea, it's one of my faves... Question, has anyone gotten one of these sharpened? If so, where? Mine is getting close... Seems like CMT is my go-to -- not sure why -- I just happen to like them -- nothing scientific. For round-overs, it's now the Quadra-cut... For moldings, it's usually Eagle America or CMT -- again, not sure why... Quote
Beechwood Chip Posted September 27, 2013 Report Posted September 27, 2013 In a debate whats the best router bit ? Did you mean debate or rebate? In a rebate I'd use on of these. I don't know what kind of debates you've been in. Quote
Tom King Posted September 27, 2013 Report Posted September 27, 2013 ==> Freud quadra cut round over bits At first, I thought it was just a marketing gimmick -- then got one --- cleanest-cutting round-over that I've ever used... ==> big daddy yea, it's one of my faves... Question, has anyone gotten one of these sharpened? If so, where? Mine is getting close... Seems like CMT is my go-to -- not sure why -- I just happen to like them -- nothing scientific. For round-overs, it's now the Quadra-cut... For moldings, it's usually Eagle America or CMT -- again, not sure why... The Eagle America bits are made by Whiteside. At least their better bits are. I was talking to the guy at Whiteside,who is responsible for making custom bits, about making a bit for me. He told me that EA sold one very close that they made for them, and it worked out. EA also sells some cheaper imported bits that have a thinner carbide on them-probably fine if one doesn't have many feet of something to run. On a side note: Lee Valley is now selling cheap bits that match the cutter profiles on Stanley 45 and 55 multi-planes. I wish they had come out a few months earlier because I had just gotten Whiteside to make a bit for me for $156, and now LV has the same profile for 27 bucks. Quote
Jens Olson Posted September 28, 2013 Report Posted September 28, 2013 Love my magnate bits. Great bits at a pretty reasonable price. magnate.net 1 Quote
PeteJr Posted September 29, 2013 Report Posted September 29, 2013 Pattern bits with top and bottom bearings. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.