Recommended Posts

Posted

I finished up this project last week, So i thought i would share it. At 18 months from start to finish this if my longest project to date. Work hours wise, I probably have 300 hours in them. The big time discrepancy, is due to 3 substantial physical injuries I had in the last 18 months, and the super hot dry summer we had in Illinois last year. The number one thing I would change about this topic is the joinery method. I will never again use integral tenons in a piece made of wood as hard as Jatoba. It took forever to fit the 32 mortice and tenon joints.
 
What does everyone think?
 
med_gallery_818_183_6254.jpg

med_gallery_818_183_68854.jpg

med_gallery_818_183_123841.jpg

med_gallery_818_183_161248.jpg

med_gallery_818_183_102537.jpg

med_gallery_818_183_93312.jpg

  • Like 1
Posted

Beautiful table. The chunky feet make it look like livestock :-) In Marc's defense, Oz you have wandered into a Portuguese vs. Spanish debate. There are a lot more countries exporting Hymenaea Courbaril than just Brasil.

Posted

Beautiful table. The chunky feet make it look like livestock :-) In Marc's defense, Oz you have wandered into a Portuguese vs. Spanish debate. There are a lot more countries exporting Hymenaea Courbaril than just Brasil.

 

Yeah, but he needs a good old fashioned ribbing once in a while ;) I'll claim it's Brazilian Cherry & disavow any and all knowledge to the contrary :P   Legume?  Never heard of her.  She must work at one of those fancy diners.

  • Like 1
Posted

How did you cut the drawer front out of the apron? Looks very nice.

 

I would assume ripping the apron piece to extract the drawer front. It's hard to see in the pictures but there might be a glue line on the top and bottom of the apron where the drawer is.

Posted

==> I would assume ripping the apron piece to extract the drawer front. 

+1

 

rip/glue does it every time...  unless you've got some high-tech cutting tools...  We just got a water-jet cutter -- that's one cool beast...

Posted

Thanks for all the praise guys.

Freddie & TrippleH Have it right, the drawer front is made by ripping the parts from the same board and then gluing the outside pieces back together.

  • Like 1
Posted

here is a better shot of the drawer fronts. I really like the continuous grain style, and if it's made with strait rift or quarter sawn lumber its almost impossible to see the glue lines. I think this photo is over exposed, as the color contrast between the aprons and legs is not nearly as extreme as it shows.

med_gallery_818_183_48123.jpg

The legs where probably the hardest parts to make, as they required 2 different jigs, and 4 different steps to shape them.

Posted

Love it.  The legs are unique and killer.  Finish looks great.  Fine work!

 

So is it jatoba or hatoba?  I hate not knowing.  I've been calling it hatoba, too, because some guy whispered it.  I talked my dealer into shipping some in last summer (2012), and not a single board has been sold since...so I'm pretty much obligated to buy some at some point.  It looks a lot better finished in Dan's pics than it does raw and stacked.  The lumber just kind of looks meh.

Posted

Eric, 
 
I think Jatoba is kind of a hidden gem, a lot of people don't want to work with it because of it's harness, and others don't like it because as you said it looks bland. I like it, because it ranges in color from orangeish brown to a dark amber red, and it's cheap as far as exotics go.
 
The finishing schedule I used was as follows:
1. sanding the surface with 120, 180, 220 grit sandpaper.
2. One coat of boiled linseed oil wet sanded into the surface with 400 grit wet/dry sandpaper.
4. four coats of satin Pratt & Lambert 38 thinned with 50% mineral spirits so it can be wiped on.
5. wet sanded with 1500 grit Mirlon to remove dust nibs.
6. four more coats of the thinned P&L.
7. another round of wet sanding with 1500 grit Mirlon.
8. One coat of natural Liberon Black Bison wax.

 

I have always pronounced it Jatoba, but have also heard it pronounced hatoba, in the flooring industry it's better know as Brazilian Cherry.

Posted
==> So is it jatoba or hatoba?
 
 
From the US Forestry Wood Reference Database
 
 
Courbaril, Jatoba
 
The genus Hymenaea consists of about 25 species that occur in the West Indies and from southern Mexico through Central America into the Amazon basin of South America.
 
The best-known and most important species is H. courbaril, which occurs throughout the range of the genus. Courbaril is often called jatoba in Brazil. Sapwood of courbaril is gray–white and usually quite wide. The heartwood, which is sharply differentiated from the sapwood, is salmon red to orange–brown when freshly cut and becomes russet or reddish brown when dried. The heartwood is often marked with dark streaks. The texture is medium to rather coarse, and the grain is mostly interlocked. The wood is hard and heavy (about 800 kg m–3 (50 lb ft–3) at 12% moisture content). The strength properties of courbaril are quite high and very similar to those of shagbark hickory (Carya ovata), a species of lower specific gravity. Courbaril is rated as moderately to very resistant to attack by decay fungi and dry-wood termites. The heartwood is not treatable, but the sapwood is treatable with preservatives. Courbaril is moderately difficult to saw and machine because of its high density, but it can be machined to a smooth surface. Turning, gluing, and finishing properties are satisfactory. Planing, however, is somewhat difficult because of the interlocked grain. Courbaril compares favorably with white oak (Quercus alba) in steam-bending behavior. Courbaril is used for tool handles and other applications that require good shock resistance. It is also used for steambent parts, flooring, turnery, furniture and cabinetwork, veneer and plywood, railroad crossties, and other specialty items.
 
 
Note: There is a cross-reference from Jatoba to Brazilian Cherry.  It seems the pronunciation of the 'J' and emphasis on the 'a' depends on region.  Several clever wags suggest avoiding the problem entirely by simply referring to it as Brazilian Cherry :)
 
Note: The correct species name is Courbaril.  Jatoba is the Brazilian common name...
Posted

I call it jatoba because that's what I was told by a guy who's fluent in Portuguese.  I'm sure hatoba is correct as well, depending on where you are.  The funny thing is it's closer related to a soybean than it is cherry - it's not actually a 'tree', proper.  It's a legume.  I discovered it by accident about a year ago & it's one of my favorite woods to turn.  It's pretty hard, but it takes a polish beautifully.  And it's extremely strong, moreso than white oak.  The density makes it really resistant to denting too, so that gorgeous table is going to hold up & stay that way for a very, very long time.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 58 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined