Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Best planer for the price

Featured Replies

It might sound obvious but are your knives sharp? My grizzly was doing that until I put in sharp knives. Now no problem at all. 

 

I have a new set of knives to put in it. I knicked one last weekend. I've been avoiding learning how to change the knives in in lieu of trying to get some other stuff done in the shop.

I have a new set of knives to put in it. I knicked one last weekend. I've been avoiding learning how to change the knives in in lieu of trying to get some other stuff done in the shop.

 

I am with you, i avoided it for months assuming it would be a PITA.  But once it got to the point that I had to push boards through with a good deal of force (it wouldn't "grab" them at all) I knew it was time.  Only took about 20 mins. 

I have a 16" Powermatic (green with racing stripe), a first model Delta 12" box, and one of these Grizzly planer/molders.  When I needed to plane something to have a fair sized batch come out to within a thousandth of the target, the Grizzly did a nice job.  It's not fast, and won't take off a big bite at the time, but it would serve a garage workshop just fine.  See if you can find one on Craigslist.  That's where I bought mine for half of this new price.

 

http://www.grizzly.com/products/13-Planer-Moulder/G1037Z

Funny, im clearing out my garage tn for the remodel and im taking my 735 planer into the basement and i notice the small bolt that attaches the handwheel is stripped out. Darnit hopefully its something i can source locally and not a weird size.

==> I'd stick with the dewalt over those.

 

+1...

 

​Those look they've seen some hard use...

 

Basically, hobby shop kit comes to craigslist all the time --- folks sometimes take-up woodworking and drop it after a couple of years, move, upgrade, etc...  One suggestion: call you local lumber dealers and cabinet shops...  Hobbyists sometimes list their kit on the lumber yard's bulletin board...  At least, they do that around here...

I think there are several Utube videos explaining how to install a Shelix cutterhead in a 735 Dewalt.

Many companies are selling planers with the Helical cutterhead installed.   

Just my $0.02, but I saved a couple hundred bucks (that I just didn't have at the time) by going with the Porter Cable instead of the Dewalt.  It's the only planer I have experience with but I love it.  I had snipe issues at first, but after tweaking the in/outfeed tables & feeding the board correctly it works perfectly every time.  I really wanted the Dewalt, but now that I've had the PC for a while & learned how to use it, I can't see why I would've spent that extra money.

Just my $0.02, but I saved a couple hundred bucks (that I just didn't have at the time) by going with the Porter Cable instead of the Dewalt.  It's the only planer I have experience with but I love it.  I had snipe issues at first, but after tweaking the in/outfeed tables & feeding the board correctly it works perfectly every time.  I really wanted the Dewalt, but now that I've had the PC for a while & learned how to use it, I can't see why I would've spent that extra money.

 

Everyone wants the biggest and baddest. :) There's no real reason for me to upgrade from my Ryobi, but I just want it so bad!

I solved the snipe issue with my very old Ryobi lunchbox by building a 30" infeed/outfeed bed out of some 1" high grade particle board and a scrap of laminate. It reduces the 6" capacity to 5" but it almost eliminated the snipe.

The problem is in that price range your caught between the high end lunch box and the low end cast iron. The low end cast iron is not a great improvement over the high end lunch box. With the issues associated with the low end cast iron I'd stick with the lunch box until you can go 20" helical or Tersa.

I'm with Don...you really have to go a little larger on the 4 post, 20" to get the performance upgrade.  I am a hobbyist and own a 735 and have no complaints.  As far as table length, all of the 4 post planers that you see are about the same as the 735 there.  If you plane anything of length, you have to have support either temporary or dedicated because all of the outfeed tables are pretty much the same size.

I solved the snipe issue with my very old Ryobi lunchbox by building a 30" infeed/outfeed bed out of some 1" high grade particle board and a scrap of laminate. It reduces the 6" capacity to 5" but it almost eliminated the snipe.

 

Did the same thing with my Ridgid lunchbox.  IIRC, I made mine about 5' long (i.e. 30" infeed, 30" outfeed) and it worked great.  The downside is that it turns a portable (if hernia-inducing) tool into a stationary tool.

Did the same thing with my Ridgid lunchbox.  IIRC, I made mine about 5' long (i.e. 30" infeed, 30" outfeed) and it worked great.  The downside is that it turns a portable (if hernia-inducing) tool into a stationary tool.

 

I found plans to build a stand for mine (just haven't been able to get the plywood yet) complete with casters & an out feed "table" that swings vertically out of the way so when you're not using it it doesn't take up more than a couple sq.ft.  The 'table' is actually (2) 1x4's on edge.  They're connected together on the far end with a taller piece that has PVC on it (the top of the PVC, with the arms down even with the out feed) and another cross member that's adjustable w/ the same PVC cap on it.  The plans are out in the shop right now, but if I remember I'll take a look & see if I can find a web address on them tomorrow & post a link to where I got them.  It's a really simple build & idea that's really customizable.

I have one of the first generation, first models of lunchbox planers.  I don't remember the model number, but it's a Delta.  As soon as it came out people hated it because it sniped terribly.  I still use it once in a while.  We just hold up a board as it first enters, and hold up on it as it comes out the other side to the  point of picking up the back end of the planer, and it eliminates any problem with snipe.  The little metal extensions have been long since been misplaced, and never used.  It's a lot different working with helpers than by yourself.

Did the same thing with my Ridgid lunchbox.  IIRC, I made mine about 5' long (i.e. 30" infeed, 30" outfeed) and it worked great.  The downside is that it turns a portable (if hernia-inducing) tool into a stationary tool.

Hey Rob....The 'downside' may actually be an upside!

I've talked the talk, and now I think I'm about to walk the walk by purchasing a 735x.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.