Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Working with Poplar

Featured Replies

Making another dresser, this time out of Poplar.  Ive found that my panels, if left for a day or two, tend to bow badly.  Is this normal or should I be doing something to prevent this? 

Few things here.

First, how thick are your panels? Thinner panel will tend to warp more than thicker panels.

How dry is your lumber? Lumber will wrap as it loses moisture, so make sure you stock is dry before beginning your project.

Where are you storing them? Should be a dry, moisture controlled environment.

Finally, you should cut your project pieces as close to assembly as possible. This will help to reduce any possible warping.

Can you post a few pics?

Franklin is right on all the points he mentioned.

Poplar frequently comes in wider widths and the changing grain can lead to it moving. A wide piece of poplar in my shop yesterday had 4" that was almost quartersawn grain down the side and the rest was Plain or flat sawn. I ripped off the quarter sawn section to use for frame parts because it will be straighter and more stable and used the rest for panels. Further flattening and being inserted into a frame should keep the panel fairly flat.

poplar will warp more than other hardwoods because it is grown and dried quite quickly.  i normally use slightly thicker wood and s4s and sticker over night while taking extra care in my glue ups.

+1 to all above, with the added note that once it acclimates it's pretty stable.

 

careful when working with it, it dents if you look at it too hard...

If you can put your panels in a plastic garbage bag or dry-cleaner bag or wrap in plastic. And if the panels were straight to begin with. It will go back flat. The wood will equalize in the bag. What happened is one side of the board is dryer than the other causing it to bend. Keep your processed panels bagged till your ready to assemble. 

 

-Ace-

  • Author

all great tips...   one more question though, how should i store my panels before assembly? lying down? stacked leaning against a wall? does it matter?

  • Author

bench?    whats a bench?    i have a tablesaw top and a garage floor....  lol   building my shop next year THEN i build a bench.  uber-excited

An old guy told me, a long time ago, that he had built a chicken coop out of green Poplar and SweetGum, and after about a year, the inside was on the outside.

 

That said, I like Poplar for some things that are going to be painted.

There is nothing wrong with using poplar. We are building a lot of solid color all solid Poplar kitchens now days. The biggest issue is with the mills. All the Poplar we use for cabinets gets a second run through the kiln making it a bit more expensive. Bringing it more on par price wise with alder defeating the purpose since both are a "green" material.

  • Author

these panels seem to be holding up and ill be assembling the case in the next few days... still working on design elements as i go but its coming together.

 

as for finish, ill be doing a greywash technique my wife found so ill let you guys know how that goes. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.