osgw380 Posted February 2, 2014 Report Posted February 2, 2014 I built this coffee table for family friend that just built a new home. The table is made of walnut and black jack. I left the edges of the tops, aprons and lower shelf live edge for character. All the joints are mortise and tenon joints including the butt joints on the top. The black jack had lots of spalting and worm damage so I cleaned out the worm damage and filled in the damage with epoxy. It allowed to be able the keep the character created by the worms but no spaces for dust to settle. Its hard to pick up in pictures but you can see the chew marks from the worms through the epoxy. To finish the table I used dewaxed shellac and top it with arm-r-seal. It is gloss which makes it hard to get photos without glares. In the top I used glass and a shelf lined with leather inside to hold a arrow head collection and I used gel etching to put the family's name on the glass. This one is one of my first tables and is really hard to let go of but it resides in a good family's home. Quote
..Kev Posted February 2, 2014 Report Posted February 2, 2014 Beautiful piece! Educate me if you would please. What is "black jack"? Quote
osgw380 Posted February 2, 2014 Author Report Posted February 2, 2014 It is an oak I believe a red oak species it has lots of character from pinks and purples to a more common oak look. It will have lots of low dead branches usually and a dark almost black looking bark. I have heard some refer to it as post oak. Black jack my be a regional name. Quote
..Kev Posted February 2, 2014 Report Posted February 2, 2014 It is an oak I believe a red oak species it has lots of character from pinks and purples to a more common oak look. It will have lots of low dead branches usually and a dark almost black looking bark. I have heard some refer to it as post oak. Black jack my be a regional name. Thanks! Found some info on line as well. Awesome looking stuff, how is it to work with? Quote
Jasahan Posted February 2, 2014 Report Posted February 2, 2014 I will most likely steal that apron idea. Amazing. Quote
Southwood Posted February 2, 2014 Report Posted February 2, 2014 Beautiful table. Around here we call it Black Oak or Piss Oak. It is cut and sold as Red Oak around here. Quote
Eric. Posted February 2, 2014 Report Posted February 2, 2014 I'm usually not a fan of rustic pieces, but this one works for me. I dig it! And I agree with Mel...the way you incorporated the live edge into the aprons is the coolest part. Well done sir! We have Black Jack oaks here in Missouri. I see them most often in the southeastern part of the state around where the Mississippi bottomlands end and the Ozark Mountains begin. I have trouble differentiating them with Post oaks. Quote
osgw380 Posted February 2, 2014 Author Report Posted February 2, 2014 Thanks I wish I could say the aprons were an original idea but I most likely seen it somewhere else....I don't really remember why I decided to do it that way. TIODS black jack is a very hard wood much harder than the walnut but still very workable. This piece was from a dead tree and was heavily spalted when cut green it has some amazing colors in it. From my experience it spalts very quickly when the tree is dead and will have worm damage very quickly after it dies. Quote
Eric. Posted February 2, 2014 Report Posted February 2, 2014 The way I understand it, that inky pigmentation type of spalting, caused by a particular type of fungus, usually occurs when trees are still living. There are other types of spalting that aren't interesting to woodworkers that occur more commonly when a tree is dead. I think it depends on the type of fungus. I cut up a huge hackberry a few years ago that had fallen into my dad's yard from the neighbor's yard. It was still alive when I cut it up, and it was loaded with that inky spalt. Quote
tdale51@yahoo.com Posted February 8, 2014 Report Posted February 8, 2014 I have never seen aprons done with a natural edge. I REALLY like the look! I've seen natural edge tops a billion times but never aprons. Quote
bgreenb Posted February 10, 2014 Report Posted February 10, 2014 Gorgeous table. You really did justice to some beautiful wood! Quote
osgw380 Posted February 11, 2014 Author Report Posted February 11, 2014 Thanks bgreen the black jack and walnut combo is my favorite combo woods to use together. It is starting to be an ongoing theme in our house. Quote
Phil Lunsford Posted March 9, 2014 Report Posted March 9, 2014 It's pretty safe to say that I'll be stealing the live edge apron idea Out of curiosity, did you mortise and tenon those? Quote
osgw380 Posted March 9, 2014 Author Report Posted March 9, 2014 It's pretty safe to say that I'll be stealing the live edge apron idea Out of curiosity, did you mortise and tenon those? Steal away the couple I made it for really enjoy it and it fits nicely into their new log style home. They are mortise and tenon. I cut the tenon on the tablesaw and cut the live edge side (bottom side) on the bandsaw to get the desired length on the tenon. Quote
wdwerker Posted March 9, 2014 Report Posted March 9, 2014 Very nice look ! That will go great in a log home. I saw a mirror frame that used the live edge towards the inside and it was a very interesting piece. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.