Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Miter saw for woodworking?

Featured Replies

Me and Mel made it seem like everything's cool here on the forum, but we were arguing all night on the phone! :lol:

I think we agreed to disagree :)

In all seriousness it's all good. Just two different opinions based on individual experience and our own needs in our shops.

  • Replies 66
  • Views 11.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • ChetlovesMer
    ChetlovesMer

    I gotta chime in with Mel on this one. I have a 10 year old Hitachi SCMS. It's the one with the rails going forward so you can stick it right up against the wall. I've cut 90's, 45's and a host of ot

  • I have to agree with you Mel. There is no reason why you could not dial in the fit of a miter to be accurate within a few thousandths of an inch. The inaccuracies are probably the result of missed mar

  • Don't stir the pot then leave the kitchen. Layout is important no matter which tool is used. The point Freddie was trying to make was that one cannot get good results from a tool from lowes or HD. Th

 Just two different opinions based on individual experience and our own needs in our shops.

(Which by the way I always win)  :ph34r:

(Which by the way I always win) :ph34r:

Like I said, agreed to disagree ;)

Nah Im just kidding. The world is too damn big and diverse to have everything be the same cut and dry opinion. Maybe I'm ruined because I spent a lot of money on a defected saw, and it put a bad taste in my mouth. Unless I personally see it, it's hard for me to believe it. But again, thats only one persons opinion, mine. 

I was thinking maybe it has to do with the type of job one does? If seems to me if one was going to a different job sites all the time and moving the saw it probably won't be as accurate, but if one works in the same shop with the saw mounted in the same spot tuned up, it might be a little more accurate. What do you guys think?

I was thinking maybe it has to do with the type of job one does? If seems to me if one was going to a different job sites all the time and moving the saw it probably won't be as accurate, but if one works in the same shop with the saw mounted in the same spot tuned up, it might be a little more accurate. What do you guys think?

 

I think that's a very valid point Bart!  I thought of mentioning it earlier but, the way the thread was going, I'd just stay out.  ;)

 

Frankly, I love my SCMS for woodworking.  It is dedicated to my shop in a dedicated station.

I had this saw dedicated to my shop when i first got it. I had it all dialed in and nice. I do the right thing and let the blade cut slowly, i dont release back up til the blade has stopped, but the reaults are not furniture quality. This has happened on many blades, so i ruled out it wasnt a faulty blade. Disgusted, i threw it in my truck and now it goes to work with me. Too lazy i guess, i never investigated it further, just didnt want to invest more time.

Not to rehash this, but you may have a lemon or like you said didn't take the time to dial it in.

Overall, I'd say with the quality of your molding the saw has earned it's keep. In the truck, to the sure... Dealing with the machines inconsistencies sure, but nonetheless great results from the machine.

No, not to dial in, to investigate the deflection. The saw was tuned up, but the saw has a tendency to overcut a section of the crosscut or create two planes that i can see or feel. The tables arent flat and level across the saw table. This magnifies the problem on a small detail piece, say a shoe moulding or a piece of bead, etc. i have .018" across the table, not an issue on a jobsite, not acceptable in the shop. The two fences werent in a straight line with eachother, so out came the painters tape to shim from behind each fence. These are all annoyances to me, but i sort of bandaged those problems with blue tape. Blue tape all over an $800 saw, you gotta be kidding me!!! The worst problem by far is the deflection in the cuts. I also have a $100 kobalt slider that is light to carry to small rough jobs. It has the same slop as my bosch, but thats to be expected for what i paid for it. All in all, it has basically knocked the wind out of me, and i just give it dirty looks.

and i just give it dirty looks.

I think you won the thread with that statement.

 

EDIT

In reality, only miter saw I have used is the 10+ year old Makita (non slider) at my dads. I think the blade is that old, too. Never been cleaned, or removed as far as I can remember. The quality of cut is awful, but it is a beast of a saw for rough cutting anything you throw at it.

 

That is the magnitude of experience I have with a miter saw, I'd like to get my hands on a Kapex one day. But that might not be for awhile.

My girlfriend came to visit me at work today, and we did a test cut with perfect form on my miter saw. I showed her the cut, she examined it closely, then shook her head in disapproval and handed it back to me. :)

Sounds to me like there's an issue with that saw!

 

Obviously I'm not there seeing the same thing and circumstances that you are and I trust your opinion that the cut is not right.  I also trust you enough to believe that the stock was square and all that stuff..  That only leaves an issue with that particular saw.

 

Good luck figuring it out!

Sounds to me like there's an issue with that saw!

 

Obviously I'm not there seeing the same thing and circumstances that you are and I trust your opinion that the cut is not right.  I also trust you enough to believe that the stock was square and all that stuff..  That only leaves an issue with that particular saw.

 

Good luck figuring it out!

I have no desire to look into it any further. :) It's going to remain a field saw and one day a kapex will fall out of the sky and land in my shop. 

I have no desire to look into it any further. :) It's going to remain a field saw and one day a kapex will fall out of the sky and land in my shop. 

 

I sincerely hope you are correct!  I also don't blame you for leaving that one a field saw!

Sounds to me like there's an issue with that saw!

 

 

 

Well there's certainly no issue with his girlfriend!  She's a keeper and it's clear she knows her woodworking too!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.