Recommended Posts

Posted

I am working on a client build for two full-size beds. The beds will be made with walnut and cherry. No secondary woods allowed.

The legs will be walnut, with the rest of the bed being cherry.

I will start with a prototype for the legs for client approval this week.

Wood stacked:

2bdb4e55db24d2842a033ffec0b315c2.jpg

510282a636909ebb5ac33b5de85a07f1.jpg

Model made using Autodesk Inventor:

57f9f78ddb538dcdf6fb68eac19e8638.jpg

47d6202de1aa5632475fdc74ddf83d5d.jpg

Thanks for looking. :)

Posted

Holy cow does that look awesome. I am digging the legs and for this. I'm notorious for straight lines and no curves, but that is amazing.

I'm looking forward to this!

  • Like 1
Posted

Sam, thanks :) The client showed me a picture that provided the inspiration for this. I simply cleaned up the design and made it more modern.

Byrdie, thanks! :) You'll notice the legs have a flat on the top and bottom of the curve. This is because the beds will be used as bunk beds for the next few years.

Steve, thanks! :) I'm using cherry for the slats.

Posted

The design is interesting, would love to see the original photo and how this current design came to fruition. 

 

Also, what types of joinery will you be incorporating into this build? I assume the rails will be knock down, will the head boards and foot boards be knock down as well, or have integral joinery? 

  • Like 1
Posted

I'll post the pic later.

The headboard and footboard will be attached using dominoes. The side boards will be knockdown. Either Rockler hardware or similar.

Posted

The fiancé approved of this bed design for me to make us :) but she wants the posts at the foot of the bed shortened.

Now to get the list of house projects done first...eh.

  • Like 1
Posted

I hesitate to ask but are you going to have some kind of mating devise so the upper bed doesn't slide off the top of the lower one?  I've seen as simple as an indent in the top of the lower unit that the adjusting foot in the upper fits into.  More solid would be a dowel glued into the top of the lower that fits into a hole in the bottom of the upper.

  • Like 2
Posted

I hesitate to ask but are you going to have some kind of mating devise so the upper bed doesn't slide off the top of the lower one?  I've seen as simple as an indent in the top of the lower unit that the adjusting foot in the upper fits into.  More solid would be a dowel glued into the top of the lower that fits into a hole in the bottom of the upper.

 

He just got a domino...

Posted

I have a question about the front rail, ignore me if this is just in the picture. It seems that the mattress is sticking out under the front rail. Are you going to drop the front rail to remedy that, or am I missing something completely?

Posted

I hesitate to ask but are you going to have some kind of mating devise so the upper bed doesn't slide off the top of the lower one?  I've seen as simple as an indent in the top of the lower unit that the adjusting foot in the upper fits into.  More solid would be a dowel glued into the top of the lower that fits into a hole in the bottom of the upper.

 

Ya mean it won't float? Perhaps a firm "stay" command may be in order. :)

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 65 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined