Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cutting boards... Is Christmas over yet?

Featured Replies

  • Replies 77
  • Views 14.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Tom Cancelleri
    Tom Cancelleri

    I've been cranking out christmas stuff and I still have the most difficult of things to do. I'm knocking out 2 end grain cutting boards, then it's onto segmented salad bowls   Planing       Al

  • Just helps even out the pressure to help keep it flat..

  • Tom is that wax paper you're using to prevent the glue from getting on the clamps and other surfaces?  Oh it looks to me like you "coulda squoze" one more clamp on there

  • Author

Gotta do the handles.

d01555875f22d020b59aad0b16773e60.jpg

4941becd66ad9ed35b54b1e8b9f192c2.jpg

Sanded to 150 grit. It's a cutting board, 220n+ is overkill.

3d8021149d7878e6d567856e8ab3ccd1.jpg

Handles

cd98e2d3ba0ccca2dcc6b210d1d0e3fd.jpg

Next up.... Finish

  • Author

A laxative sure does make a good finish.

1 down, 1 to go. Tomorrow I'll slice the other one, glue it up and have the other one done Friday.

8dcb15a49ec7937187891537a3b840f6.jpg

bd29e423b8142c74b02f997ad638d2f1.jpg

Looks great!  Needs a stripe tho  ;)

 

Very nice work!

  • Author

The handles added a lot of tedious sanding. Luckily I have turners sanding strips that are cloth backed and very flexible. I love my 150/3 sander though, made life easy

Looks great! Needs a stripe tho ;)

Very nice work!

Was wondering when that would be thrown out haha

  • Author

Looks great!  Needs a stripe tho  ;)

 

Very nice work!

 

I thought about doing a maple stripe, but I really don't have to time to get all these things done. I omitted doing an inlay of my Initial in the lower right corner. However it would seem I'm getting a wood burning brand for my birthday next week. Woohoo! Won't be ready in time though

  • Author

Just finished the machine work on my first 2 cutting boards. Decided to stick with edge grain, as I have no drum sander. Glad I did, especially after you mentioned 30 passes!

Looking good there, T!

 

Thanks. You could always use a belt sander with 100 grit, and not go too crazy with the sanding, then finish with a ROS

Question on the stripes... how thin are they?  Was picking up some wood in preparation for an actual project and saw some pre-cut strips and consider using them instead of cutting my own...

Question on the stripes... how thin are they?  Was picking up some wood in preparation for an actual project and saw some pre-cut strips and consider using them instead of cutting my own...

 

Depends on what you're looking for in the end result..  When I'm doing the 3 pieces for the stripe, I shoot for about 1/8".

Thanks Kev... I thought 1/8" looked and felt about right from a bending perspective... Was considering trying a bunch of sandwiched veneers to get an interesting look.

Thanks Kev... I thought 1/8" looked and felt about right from a bending perspective... Was considering trying a bunch of sandwiched veneers to get an interesting look.

 

Thinner works as well, just depends on the look you're going for.

  • Author

Question on the stripes... how thin are they?  Was picking up some wood in preparation for an actual project and saw some pre-cut strips and consider using them instead of cutting my own...

 

When putting a contrasting wood strip in, the thickness must be thin enough that you can bend it to your curve If it's straight, that doesn't matter at all. As long as it's wide enough to accommodate the thickness of the board.

  • Author

Sadly no, only thing I can think would be lower your bit speed, you're generating too much heat for your feed rate. I had this issue when I routed the handles burning in the corners.

  • Author

Number 2 getting it done.

Through the drum sander, and trimmed on the table saw.

737122e8f4478a5173161a5ad5057110.jpg

a44ecac5db88fa5e2aa666adbcff07b1.jpg

Sanded with my Festool 150/3 no round over this time. Break the corners with some 150 grit. Just wiped it all down with mineral oil. Look at that grain!

3fd655b7044e14b61130f53d87059765.jpg

  • Author

Putting on a second coat of mineral oil, then I'm gonna buff them with a microfiber cloth and call it done. 

  • Author

I really wish I had a big vat of mineral oil to soak them in and just walk away. I'm just putting it on thick and letting it soak in.

  • Author

Wouldn't soaking it in that make it warp or ruin it somehow?

 

You only soak in for a couple of minutes so that the end grain wicks in as much oil as it can. The oil helps seal and water proof any wood fibers. The mineral oil won't warp the wood like water wood. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.