Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cutting boards... Is Christmas over yet?

Featured Replies

  • Author

I usually set the TS to the thickness they are now so that you really end up with perfect squares..

 

It is 1 11/16" thick and the other is 1 5/8"

 

I will say, it's time to upgrade the drum sander, the Performax 10-20 has been out grown. It was great when I first started woodworking.

  • Replies 77
  • Views 14.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Tom Cancelleri
    Tom Cancelleri

    I've been cranking out christmas stuff and I still have the most difficult of things to do. I'm knocking out 2 end grain cutting boards, then it's onto segmented salad bowls   Planing       Al

  • Just helps even out the pressure to help keep it flat..

  • Tom is that wax paper you're using to prevent the glue from getting on the clamps and other surfaces?  Oh it looks to me like you "coulda squoze" one more clamp on there

Your thicknesses are fine..  It would be nice to be able to have a a bit more room in the drum sander but, it's doable.

 

The face grain's look pretty good too..

End grain it is

f96a3bb77caef89a83ef4eb47be113b6.jpg

If I could add a suggestion, I would arrange the ends so that the sequences are all complete from end to end, as opposed to a half sequence on each end. Other than that it's nice to look at.

Trip through the planer to clean up and joint the faces.

29d714d75c60e38482577aa756043b93.jpg

All squared up and trimmed at the table saw.

2be046e3bb51c5cfa5eb16458d5e4472.jpg

Debating now if I want to do them end grain or not. They look great as is, and would still kick ass as cutting boards.

I thought planing these is dangerous? Or is that only once they are all end grain facing up?

I thought planing these is dangerous? Or is that only once they are all end grain facing up?

The orientation has the knives working faces at this point.

  • Author

If I could add a suggestion, I would arrange the ends so that the sequences are all complete from end to end, as opposed to a half sequence on each end. Other than that it's nice to look at.

 

Freddie,

 

I thought about leaving it straight, however by staggering the blocks in a brick pattern it adds to the strength of the board reducing any chance of a glue joint failing. While it's rare, it's still a possibility, I had a glue joint do it on a long grain board I had bought a long time ago.

  • Author

I need to figure out how I'm gonna do the finger recesses on the bottom. I'm thinking cove bit on my router table with the flip stops set in place, and locate it in the centers on the short edges.

I need to figure out how I'm gonna do the finger recesses on the bottom. I'm thinking cove bit on my router table with the flip stops set in place, and locate it in the centers on the short edges.

 

I assume you're talking about for handles?

 

I just did a round over on both sides of the board and skipped the handles.  They're plenty easy to pick up..

  • Author

I assume you're talking about for handles?

 

I just did a round over on both sides of the board and skipped the handles.  They're plenty easy to pick up..

 

I always get nervous about routing end grain. I suppose I could use a 1/2" round over bit on both sides. Always afraid of tear out, though a backing block does wonders

You'll be fine..  Just rout the short ends first..  I had no issues with tear out and didn't have to use a backing board.

Freddie,

 

I thought about leaving it straight, however by staggering the blocks in a brick pattern it adds to the strength of the board reducing any chance of a glue joint failing. While it's rare, it's still a possibility, I had a glue joint do it on a long grain board I had bought a long time ago.

I'm sorry, I was not referring to changing the whole layout. I was referring to your original layout just adjusting the outside layers so the pattern was continuous from end to end instead of a half pattern on the ends. Am I making sense or just rambling? :D

Oh lord, Freddie is rambling , does anyone know how to get his gal to give him the treatment he so desperately needs ? < evil grin>

  • Author

I'm sorry, I was not referring to changing the whole layout. I was referring to your original layout just adjusting the outside layers so the pattern was continuous from end to end instead of a half pattern on the ends. Am I making sense or just rambling? :D

 

Makes sense, however where sapwood and heartwood met had some spots that were irregular and was unstable and I could break off some of it by hand and it was close to the bark. I had to trim those pieces on the table saw so they had to go on the ends of the boards. I also alternated the grain to avoid cupping.

  • Author

I will say I'm rather excited to use my 150/3 on a project that's more than just reindeer. I haven't done any finishing of larger projects since I got the sander. 

 

I actually enjoy sanding flat surfaces.

  • Author

30 or so passes through the drum sander. Trimmed up the ends, all nice and squares edges. Next up, round over the edges and sand to 220.

47f3e0edca2bfec52dcec85aefb508ca.jpg

  • Author

wow 30 or so passes through the drum sander??

 

 

I have the Performax 10-20. The board is 11" wide, and I have 100 grit on there right now. Sanding end grain adds more pressure than long grain, plus it's the full drum size so I was doing approximately 12 thou per pass which is slightly under 1/64". Don't wanna run through too slow or you scorch the wood, if you go too fast you stall the drum. Plus I did both sides.

If you really break it down..  With his sander and doing both sides, that's really not much.  I'd say a pretty nice job on the glue up!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.