Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Hall Table Journal

Featured Replies

I worked out my design over the last couple of weeks.

I'm thinking Alder legs and front apron(because I have some 6/4 Alder), and then a "floating" top of Walnut.

I haven't decided on the species for the sides but it will be Alder or Walnut.

 

First off...I made up some templates out of MDF and a mock leg from 2x4 pine.

http://IMG_0774_zps492f8edd.jpg

The leg:

http://IMG_0777_zpsd985a5ee.jpg

Hours 1 and 2 today I traced off the legs

http://IMG_0779_zps07b18b0a.jpg

and cut them on the bandsaw.

http://IMG_0780_zpsed1ccf57.jpg

Tonight it's the Broncos on MNF and sharpening up my spokeshaves.

http://IMG_0781_zpsc6cea327.jpg

D

  • Replies 99
  • Views 16.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Long and lean is nice, but prefer them on my ears!

  • Hours 10.5 to 15; I cut some rails, mortises and tenons, and I dry-fit the thing: http:// It still needs some tweaking to get the joints tight, but I'm almost to the curves.

  • The project is complete. Thanks to everyone for following along and for the help and inspiration. Please excuse the poor quality photographs. Dave http://   http://   http://   http://

  • Author

Thanks Ross!

The leg design is entirely "experimental" and may be a total flop, but I'm just winging it...seeing how it turns out.

I wanted to do some curves and contours on this project.

Early on I saw Eric's incredible hall table  when I was searching for "floating table top" and I love it.

I was thinking about tossing any design I was fiddling with and going with that, but I can always do one similar to Eric's if mine looks like crap, or whatever.

 

 I appreciate your "take"...now, if anyone asks, I'll tell them I was inspired by Egyptians. ;)

Great journal!  I look forward to following!

  • Author

3 degrees F when I went out to the shop this morning.

40 deg. in the shop, but it heated up quick.

 

Hour 3

I slapped my template onto my legs and started in with a flush trim bit in my palm router.

I was only taking off a tiny bit of stock; trying to get all the legs uniform before I move on to rounding things over.

The first two legs went great.

On the third for some unknown reason it became difficult to keep the router bearing running smoothly along the edge of the template.

I made a few nice divots in the edge of #3, but I figured I could salvage it in the rounding stage.

 

Leg #4 was a disaster. Not really salvageable.

I couldn't understand what my problem was.

Perhaps not enough coffee.

 

Hour 4

So I made up legs 5 & 6.

slapped on the template and started in.

As I was about six inches in my run the bit started running wonky again, tipped into the stock. and ripped out a nice chunk.

 

It's hard to explain how the router felt except to explain that when I shut down and examined the situation I found that the collar which holds the bearing to the bit shaft had loosened. So the bearing was moving up and down on the shaft in that little gap you leave when you insert your router bits.

http://IMG_0782_zpsd92ac238.jpg

 

Lesson learned. I should have stopped as soon as the router felt different.

I'm taking a break, tightening the collar with a tiny hex wrench, and going back out to make leg #7 in a little while.

:)

  • Author

You know it! I'm getting pretty good at these legs. :)

 

Hour 5:

I made a replacement template for the one that got dinged during my router antics.

Double stick tape and flush trimmed leg #6.

I did up leg #7:

http://IMG_0783_zpse41ada88.jpg

Now I have four:

http://IMG_0784_zps346d5997.jpg

Still had 15 mins. to run the shop vac.

 

Hour 6:

Put in a round-over bit and made 16 passes:

http://IMG_0785_zps06883dc1.jpg

Then some rasp and the rough legs are ready for morticing.

http://IMG_0786_zps16969951.jpg

 

Time for some breakfast/lunch.

 

 

 

AH, Much better. Looking good Dave.

3 deg. F ? My freezer doesn't get that cold :D

You got some sweet legs Dave!  Can't believe I just said that to another guy  ;)

You got some sweet legs Dave!  Can't believe I just said that to another guy  ;)

I did the same thing Kev on another thread and figured what the hey, with the laws now days, that's subtle.

Poor Dave!

  • Author

You got some sweet legs Dave!  Can't believe I just said that to another guy  ;)

 

I did the same thing Kev on another thread and figured what the hey, with the laws now days, that's subtle.

Poor Dave!

 

I can tell that you boys are leg men...and it appears you like 'em long and lean. :lol:

  • Author

Hours 8 and 9,

I cut up some front and back aprons.

http://IMG_0789_zpsb22c9a5f.jpg

 

Cut the tenons. Two rounded over and fit. (My tightest M&T joinery to date)

Two to go:

http://IMG_0790_zpsd393bc6b.jpg

The man, is making a table, and doing a hell of a job so far!... Do you believe that...A table!

  • Popular Post

I can tell that you boys are leg men...and it appears you like 'em long and lean. :lol:

Long and lean is nice, but prefer them on my ears!

  • Author

Half of hour 10 was spent completing the aprons:

http://IMG_0791_zpsa8c9cb28.jpg

That's about it for the day.

I'll save cutting the curves on the aprons until I complete the joinery for the floating top.

 

D

Dave, those tenons look great!

Did you get your first warning today?

I did, deservingly so!

  • Author

Dave, those tenons look great!

Did you get your first warning today?

I did, deservingly so!

Yep...Feel like a fool...but I'm moving on.

Yep...Feel like a fool...but I'm moving on.

 

No need to feel like a fool, poop happens  ;)

  • Author

Thanks Kev.

I was trying to be friendly but overstepped some pretty obvious boundaries.

I wasn't thinking clearly and I mostly feel bad that I involved Ken.

That was doubly wrong.

 

So anyway...like woodworking,I learned something and I'll not make that blunder again.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.