networkspeedy Posted December 27, 2014 Report Posted December 27, 2014 Full disclosure disclaimer: I'm a woodworking newb. Please don't assume I know anything. I've spent decades framing houses and doing handyman work. Finer skills are something I'm trying to learn, so please bear with me... I've gotten good results honing chisels by using 3M wet/dry sandpaper laid on a sheet of glass. I think it's a fantastic method, except I bought the glass at Lowes and they only were selling very thin plates. I know it's going to break if I apply any pressure to it on a less-than-very-even surface. How do you hone your chisels? Where do you get thick blocks of glass, say 1/4 inch or better? I know the latter question is silly, but given the fact that you folks are vastly more experienced, I'm confident you'd know better than me where to get the glass... Quote
Cochese Posted December 27, 2014 Report Posted December 27, 2014 Woodcraft has their granite slab on sale right now. At the very least, that will get you a stronger surface. Otherwise, you're in for a cavalcade of different sharpening options. Quote
Tpt life Posted December 27, 2014 Report Posted December 27, 2014 If you are into building houses then find out your contractor's granite counter top supplier. Go dig through their sink cutouts. 1 Quote
networkspeedy Posted December 27, 2014 Author Report Posted December 27, 2014 This is surprising! I wasn't aware that granite was sufficiently flat. Will checkout woodcraft.com (I'm guessing that's what was meant by woodcraft). As a framer, we were off the site far long before anyone ever got in to so much as get paint on the walls. Never saw granite ever. Thankfully those framing days are behind me =) Quote
RichardA Posted December 28, 2014 Report Posted December 28, 2014 This is surprising! I wasn't aware that granite was sufficiently flat. Will checkout woodcraft.com (I'm guessing that's what was meant by woodcraft). As a framer, we were off the site far long before anyone ever got in to so much as get paint on the walls. Never saw granite ever. Thankfully those framing days are behind me =) Do you drive by a gravestone maker ? You can get a slab of granite flooring from Home Depot or Lowes. You can use any flat solid surface.. saw table, jointer table.... The list goes on... Quote
Eric. Posted December 28, 2014 Report Posted December 28, 2014 There's a great thread about sharpening going on right now... It's packed with great info. More directed at sharpening with stones...but my advice would be to get some cheaper stones instead of dealing with scary sharp anyway. Worth a read before you invest in glass, granite, sandpaper, etc... Quote
networkspeedy Posted December 28, 2014 Author Report Posted December 28, 2014 OK I did more poking around and it turns out that the new hotness in base sharpening surfaces is quartz counter top slab. Seems cool. I'll have to get my hands on some. In the mean time I did want to report back that I eventually found this (which was hard because any normal search terms for the desired item yield completely incorrect results) http://www.amazon.com/gp/product/B00ES3U4EM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 Quote
TerryMcK Posted December 28, 2014 Report Posted December 28, 2014 If you know anybody in your area making granite or marble countertops for kitchens/bathrooms they may have some offcuts for free. Cutouts for hobs/sinks are usually just scrap. +1 on Eric's suggestion though as there are many ways of sharpening - once you have found one method that works for you stick with it for at least a year or two. Otherwise you will end up with a mountain of guides/stones/sandpaper/wet grinders/dry grinders etc etc and be overloaded with techniques. 1 Quote
Jfitz Posted December 28, 2014 Report Posted December 28, 2014 When I went the "scary sharp" route, I picked up some small offcuts of glass from the local hardware store (they repair windows). A glass store is also a good place. My glass was fairly thick (at least, thick enough) so I didn't have to worry about it. You might try some 3/4" MDF as a base - it's very flat, and a little spray adhesive should help stick the glass to the MDF. I don't know how truly flat granite countertops are - I've read comments indicating not flat enough, but for free offcuts they are definitely worth a try. Quote
..Kev Posted December 28, 2014 Report Posted December 28, 2014 You can actually buy off cuts of granite locally for much less than you can thru any on line store. Fact is that counter top shops have these off cuts all the time that they usually throw away. My wife picked me up a (roughly) 2' square piece locally for 10 bucks. Same thing with the glass, go to a glass shop. They remove old windows and have to get rid of it. The'd probably give it to you for free rather than bust it up in their barrel. I was at a local shop last week and picked up a 1/2" thick piece that I need to use for the wife's light box but, would just as easily work for sharpening. As long as you're not picky about size, these are good and very inexpensive options. Quote
Tom King Posted December 29, 2014 Report Posted December 29, 2014 If anyone is in Southern Maryland, or the DC area, Community Forklift has all manner of sizes of granite, and quartz countertop remnants pretty cheap. I bought a piece of granite countertop there about 24 x 42 inches for something like$65 to make a sharpening bench with. It even had finished edges on three sides.The granite surface plate on sale now at Woodcraft for around 25 bucks, will hold ss sandpaper with just a splash of water on it, with no need for adhesive. Slick granite countertops won't do that. I use theplate and paper to sharpen jointer knives with the LV guide. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.