wtnhighlander Posted December 31, 2014 Report Posted December 31, 2014 Can anyone recommend a good powered tool for 'sanding' the insides of bowls & such? Stuff I'm doing is not turned on a lathe, so isn't circular in form. I'm looking for a better way to clean up the inside curves. Any help will be greatly appreciated, as doing this by hand is so totally for the birds! Quote
Boatworks Today Posted December 31, 2014 Report Posted December 31, 2014 Not sure what kind of diameter you're working with, but would a flap wheel / spindle work? http://www.klingspor.com/products/Klgprfla.html Quote
wtnhighlander Posted December 31, 2014 Author Report Posted December 31, 2014 A flap wheel might work, if I can angle the driver in the right direction. I've been looking for something that is more of a ball shape. Actually found such a thing at Harbor Freight, but it is made of something like Scotchbrite pads, so I don't know how well it might work.http://m.harborfreight.com/4-inch-400-grit-fine-grade-abrasive-ball-96946.html Quote
Raefco Posted December 31, 2014 Report Posted December 31, 2014 I have some flat disks made of the material you speak of, they sand and polish hardwood pretty well but they don't do much cutting, I chuck them up in the drill press and hold the piece Quote
wdwerker Posted December 31, 2014 Report Posted December 31, 2014 I have the ball shaped scotch Brite sanders. The green is the coarsest but it's not going to take out tool and burn marks. Quote
Trip Posted December 31, 2014 Report Posted December 31, 2014 For small stuff: http://katools.com/carving-tools/guinevere-minature-finishers/-- when building rectilinear pieces, I only used it once every few months... But I left the 90* train some time ago, and now use it quite frequently... Not exactly cheap, but it's well made and works great... ==>ball shaped scotch Brite sanders got those as well, they are pretty good... I also got something similar from an auto body supplier -- I'll have to look it up, but it was a bit 'softer' for finish sanding... Quote
Vyrolan Posted December 31, 2014 Report Posted December 31, 2014 Do they make flexible sanding pands for oscillating multitools? If it could confirm to the curves and let the oscillation do the work it seems like a nice fit... I've only seen rigid triangle platens for them though. Quote
wdwerker Posted December 31, 2014 Report Posted December 31, 2014 I bought a PC detail sander that has rubber shapes you cover with sticky back sandpaper. The machine holds the rubber and rarely gets used but the collection of coves, curves, diamonds etc have been very handy. Quote
Llama Posted December 31, 2014 Report Posted December 31, 2014 I bought a PC detail sander that has rubber shapes you cover with sticky back sandpaper. The machine holds the rubber and rarely gets used but the collection of coves, curves, diamonds etc have been very handy. Some one just gave me one of those, along with a PC belt sander. It may sit on the shelf for a long time, and that one time I need it glad I had it! Quote
dwacker Posted December 31, 2014 Report Posted December 31, 2014 Look for a Kirjes drums. I think Rockler is rebranding them now. Quote
Trip Posted December 31, 2014 Report Posted December 31, 2014 Sold as part of the Guinevere system being resold by King Arthur's Tools... Quote
woodbutcher74 Posted December 31, 2014 Report Posted December 31, 2014 I get these from Eagle America. You can get the arbor kit with different grit disks. The disks are fluted so they get into the corners. I used them on what I call router bowls. Hope this helps. Quote
Barron Posted December 31, 2014 Report Posted December 31, 2014 The Arbor Tech Random Sander does a good job. I used it on carved platters I made for Christmas presents. Quote
Keggers Posted December 31, 2014 Report Posted December 31, 2014 I get these from Eagle America. You can get the arbor kit with different grit disks. The disks are fluted so they get into the corners. I used them on what I call router bowls. Hope this helps. Here's the link to the Eable America bowl profile sanding disk set - http://www.eagleamerica.com/product/v502-3000/sanding_supplies I don't own one but now that I know they are available I think I will. Quote
wtnhighlander Posted January 1, 2015 Author Report Posted January 1, 2015 Thanks everyone! Some good options here. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.