Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What's your favorite table saw? What would you buy today?

Featured Replies

  • Author

Wow.  Good to know.  I'll measure it immediately when it's assembled.  Not even my cheap lousy skil table saw had that kind of issue.

 

Yep, knotscott you were RIGHT about the blade shift issue.  

At least in my area, these saws are pretty beat up at his price point.

If he's willing to do the work it would be awesome.

Yeah true, or 3-phase.

My older Ridgid (24241) still has stock fence and rails, and webbed cast iron wings. The one-piece rails are long enough that I slid them to the right and gained enough space to add a router table without removing the right wing. It also gives me over 36" of rip capacity to the right of the blade. I could get another 6", but I like having the left wing still fully supported by the rails. Even though the previous owner removed and lost the blade guard / splitter, I feel pretty good about finding it on CL for $275, including an outfeed roller and a 1.5 hp Delta DC.

I use a PC 10" that came with a base that allowed you to raise and lower the casters to move it around the shop. I love mine even though there are much higher quality saws available. It cuts well and has repeatable results. Blade cuts square and remains aligned. My one complaint is the dust collection is terrible. I will be engineering a better system soon. I don't know the model number and lowes no longer carries it. I belive the Delta 36-725 is the current equivalent priced at $599.

I have a rigid saw that I bought from Home Depot rental used . They sell off their tools periodically

Keep in mind most of the new rigid saws have stamped sheet metal wings. The ones from 5 years ago used cast iron for the wings as well so a used early model might be a better buy.

 

That being said, the sheet metal winged model is an order of magnitude better then any contractor saw and if you don't want to buy used is absolutely the best bang for your buck today.

 

How does webbed cast iron compare to stamped steel?

The sheet metal saw wings I have seen can flex, but at least they presnt a solid surface. My webbed cast iron wings don't flex, but stuff falls through the holes. If you are tight on space and use your saw top as an impromtu workbench, being able to thread a clamp through the webs can be handy.

The sheet metal saw wings I have seen can flex, but at least they presnt a solid surface. My webbed cast iron wings don't flex, but stuff falls through the holes. If you are tight on space and use your saw top as an impromtu workbench, being able to thread a clamp through the webs can be handy.

My concern was more for things catching on the extra edges.

How does webbed cast iron compare to stamped steel?

 

CI is flatter, stronger, and heavier.  It's always a matter of opinion, but I'd rather have webbed CI than stamped steel.....I would however drop the level of the wings and ad something like 1/8" hardboard to the surface, and maybe even sheet steel over the top of the webs.  

What Knotscott said.  Even if you've caught a finger only once between the webbing & fence its too many.

My 2 cents is to buy a used contractor saw. No direct experience with job site saws but reading a lot of posts says you will not be happy as you soon progress beyond the saw's capabilities. I worked for years on a delta contractors saw with upgraded fence and was happy. Now have a cabinet saw and am very happy....

With that budget, I would go with a used powermatic or unisaw. They are better saws than the ones you can buy at the box stores for that price.

I had a small Delta contractor saw for about two months before I outgrew it, and I bought it thinking that I would get at least a year out of it. I ended up finding a used , bigger, more powerful Delta contractor saw (either the 34-444 or 34-440) from a used tool store for about $200-$250. The saw is beefy and the same depth as the Unisaw. It is one of those old belt-driven motor that hands off the back, Made in USA saws. I upgraded the belt to a link belt, upgraded to a T2 fence system and built a mobile station with my router table attached and an extension wing out of oak, upgraded the switch to a paddle stop switch, and built an out feed table. I got all of that within your budget. So that is an option too. It is virtually a cabinet saw.

post-16677-0-23294200-1420948572_thumb.j

post-16677-0-63179200-1420948588_thumb.j

post-16677-0-26646400-1420948600_thumb.j

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.