Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What's your favorite table saw? What would you buy today?

Featured Replies

I'm kinda conducting a straw poll here.  I want to see what everyone is using and why.  I'm upgrading my table saw and I'd like to get a good one.  I know you folks aren't playing around when you choose your tools, so who better to ask than you?

 

What saw do you use now, and what saw would you buy today if your budget was 500 to 600 dollars?  (sorry that's all I gotz)

 

Without any input, my choice would probably be the Bosch 4100DG-09 10" Worksite Table Saw with Stand.  Either that or a Rigid model with similar features.  This is because I think 10 inches is a good size blade, and 120 volts is best for me because I can't very easily go to 220.  The ability to collapse and roll away the stand+saw for storage off to the side is also a big bonus.

I'd save a little bit longer..  If you're going to seriously get into this hobby, invest in a good saw.

 

Additionally, if you look back thru this section,  you'll find a few threads on this subject.

I'd save a little bit longer.. If you're going to seriously get into this hobby, invest in a good saw.

Additionally, if you look back thru this section, you'll find a few threads on this subject.

This ...

What is your long term goal with saw?  I personally do not like jobsite/worksite saws for woodworking.  I had one for years that when I bought it I needed it more for home DIY stuff, and was also lured into the fact it could fold and be carted away.  When I got more serious into actual woodworking I found its limitations all too quickly.  The biggest issue that forced me to replace it was the table developed a hump over time from being stored on its side.  It was located just so that I could never be certain I could get a 90 degree cut to the table. 

 

If money is tight and you need a TS right away, consider looking at a used traditional contractor saw, where you will get a cast iron top and a belt driven motor.  This is what I did for my current TS, and I put a modern fence on it as well as ZCI with a Microjig Splitter.  Even with the updates, my costs for the saw were well under your budget.

My first table saw was a Jet JWTS 1.5hp contractor style saw. Worked great for me for a while, and I just so happened to be surfing around on Craigslist and found a 3hp Jet JTAS cabinet saw with 50" xacta premium microadjust fence and Xacta router lift with Bosch 2.25 1617EVS router for $500 bucks. I cleaned the saw up, spent some money on evaporust and materials to clean the surface rust off the top. Well worth the 2 days of soaking and elbow grease to clean it up. The saw runs great and cuts beautifully. I'd say scout around Craigslist if you can and find something that you will grow into and not out of.

The table saw I would love to have in my shop would be SawStop PCS 3HP.  Alas, before that can happen I would need to upgrade the house service as well as wire a subpanel out in the shop.

  • Author

My first table saw was a Jet JWTS 1.5hp contractor style saw. Worked great for me for a while, and I just so happened to be surfing around on Craigslist and found a 3hp Jet JTAS cabinet saw with 50" xacta premium microadjust fence and Xacta router lift with Bosch 2.25 1617EVS router for $500 bucks. I cleaned the saw up, spent some money on evaporust and materials to clean the surface rust off the top. Well worth the 2 days of soaking and elbow grease to clean it up. The saw runs great and cuts beautifully. I'd say scout around Craigslist if you can and find something that you will grow into and not out of.

 

Hmmm.  That's some advice I can take.  Will do!

  • Author

What is your long term goal with saw?  I personally do not like jobsite/worksite saws for woodworking.  I had one for years that when I bought it I needed it more for home DIY stuff, and was also lured into the fact it could fold and be carted away.  When I got more serious into actual woodworking I found its limitations all too quickly.  The biggest issue that forced me to replace it was the table developed a hump over time from being stored on its side.  It was located just so that I could never be certain I could get a 90 degree cut to the table. 

 

If money is tight and you need a TS right away, consider looking at a used traditional contractor saw, where you will get a cast iron top and a belt driven motor.  This is what I did for my current TS, and I put a modern fence on it as well as ZCI with a Microjig Splitter.  Even with the updates, my costs for the saw were well under your budget.

 

Sounds like you and T Cancelleri are on the same vibe.  What can I do to make sure I'm not getting scammed with a used saw that has problems?  What things should I look for?  I can think of many things, but I'm not confident I would know every critical checkpoint to inspect.

  • Author

How hard is it to move around a cabinet style saw?  I like the firm stability they provide.  Would it be possible to set it on top of some kind of mobile base so I could at least slide it around?

How hard is it to move around a cabinet style saw?  I like the firm stability they provide.  Would it be possible to set it on top of some kind of mobile base so I could at least slide it around?

 

Yes - Some have casters built in but, you can get a mobile base for most all of them.

When I went to go look at the saw I bought, I brought a combination square and some hardwood with me.  I checked to make sure the blade was square to the table, and was parallel to the miter gauges.  With the seller's permission, I made some test cuts with it.  I checked to make sure the cut was square to the face at several points and that the piece was at the dimension I intended.  The biggest risk with older saws is that there maybe a lot of runout which may or may not be noticeable, so it comes down to the quality of the cut left behind.  

 

If the seller doesn't want you to make a cut, which may be understandable for liability reasons, ask him to make the cut for you.

 

If everything checks out, and the saw is overall in good condition, I would say go for it.

Used Powermatic or Unisaw.

 

At least in my area, these saws are pretty beat up at his price point.  

If he's willing to do the work it would be awesome.

The Ridgid saw that Vyrolan pointed out is a good choice in that price range. I have an older version and love it. Mobility is good, stock fence is pretty good, and is a nice stable saw. If you want to jump right in without doing any upgrades right away, this is a good option. But plan on upgrading the blade of pretty much any saw you buy. The mfg generally doesn't put a high quality blade on the saw.

  • Author

The Ridgid saw that Vyrolan pointed out is a good choice in that price range. I have an older version and love it. Mobility is good, stock fence is pretty good, and is a nice stable saw. If you want to jump right in without doing any upgrades right away, this is a good option. But plan on upgrading the blade of pretty much any saw you buy. The mfg generally doesn't put a high quality blade on the saw.

I've got a relatively new freud diablo all purpose for that. That blade was the only thing my old saw had going for it.
  • Author

That Ridgid saw is probably the one I'm going to go with. Call it my journeyman saw I suppose. Eventually I may get to the point where saws in the two to five thousand dollar range are right for me. As someone who is not new to table saws, but pretty new to finer woodworking, this saw looks like a good fit between 5 and 6 hundred. The spacious cast iron top has me salivating. It's practically torture knowing I won't be able to get it until near the end of the month. (Waiting on a bonus i was awarded at work to come in)

Keep in mind most of the new rigid saws have stamped sheet metal wings. The ones from 5 years ago used cast iron for the wings as well so a used early model might be a better buy.

 

That being said, the sheet metal winged model is an order of magnitude better then any contractor saw and if you don't want to buy used is absolutely the best bang for your buck today.

I'm kinda conducting a straw poll here.  I want to see what everyone is using and why.  I'm upgrading my table saw and I'd like to get a good one.  I know you folks aren't playing around when you choose your tools, so who better to ask than you?

 

What saw do you use now, and what saw would you buy today if your budget was 500 to 600 dollars?  (sorry that's all I gotz)

 

Without any input, my choice would probably be the Bosch 4100DG-09 10" Worksite Table Saw with Stand.  Either that or a Rigid model with similar features.  This is because I think 10 inches is a good size blade, and 120 volts is best for me because I can't very easily go to 220.  The ability to collapse and roll away the stand+saw for storage off to the side is also a big bonus.

 

A full size saw has a bunch of advantage over a portable.  Table surface area, torque, noise, safety, upgradability, stability, reliability, feasibility to fix, and even accuracy.  Portability is the only advantage of the jobsite saws. The floor space differences aren't huge.  Unless you need to haul it from location to location, a stationary full size saw is the way I'd go.  The Delta 36-725, Ridgid R4512, and Cman 21833 are in the same price range as the Bosch.  The Delta has the better track record and a better fence.  A good used full size saw is an option if the right deal comes along.

 

 

The ABCs of Table Saws

You won't regret the ridgid saw. I almost pulled the trigger on a bigger saw, but the ridgid handles everything I need.

  • Author

A full size saw has a bunch of advantage over a portable. Table surface area, torque, noise, safety, upgradability, stability, reliability, feasibility to fix, and even accuracy. Portability is the only advantage of the jobsite saws. The floor space differences aren't huge. Unless you need to haul it from location to location, a stationary full size saw is the way I'd go. The Delta 36-725, Ridgid R4512, and Cman 21833 are in the same price range as the Bosch. The Delta has the better track record and a better fence. A good used full size saw is an option if the right deal comes along.

The ABCs of Table Saws

I have decided as of last night, to go the road you suggest and go with a stationary saw.

Thanks for the model numbers and the link!

  • Author

Keep in mind most of the new rigid saws have stamped sheet metal wings. The ones from 5 years ago used cast iron for the wings as well so a used early model might be a better buy.

That being said, the sheet metal winged model is an order of magnitude better then any contractor saw and if you don't want to buy used is absolutely the best bang for your buck today.

The listing on the home depot site is saying cast iron, so I'm feeling good about that.

The listing on the home depot site is saying cast iron, so I'm feeling good about that.

 

The main table of the R4512 is cast iron....the extension wings are stamped steel.   Be aware that many of the R4512 and 21833 units were plagued with an uncorrectable alignment issue....the blade alignment would shift when the blade was raised or lowered.  That issue didn't effect all units, but enough that it was a significant concern.  There's been rumor that it's been corrected (several times), only to keep hearing of the continued problem.  If you pursue one of those saws, check the alignment problem early and be prepared to return or exchange it. 

  • Author

The main table of the R4512 is cast iron....the extension wings are stamped steel.   Be aware that many of the R4512 and 21833 units were plagued with an uncorrectable alignment issue....the blade alignment would shift when the blade was raised or lowered.  That issue didn't effect all units, but enough that it was a significant concern.  There's been rumor that it's been corrected (several times), only to keep hearing of the continued problem.  If you pursue one of those saws, check the alignment problem early and be prepared to return or exchange it. 

 

Wow.  Good to know.  I'll measure it immediately when it's assembled.  Not even my cheap lousy skil table saw had that kind of issue.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.