Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

first router inlay attempt

Featured Replies

Well, it's go big or go home right?

I was asked to make a box for my friends wedding reception that notes from attendees would be locked in and the couple could open on their first anniversary.

I've used this as an excuse to try my hand at router assisted inlay.

I looked at a few simple designed and decided to just nut up and give it a go.

I am goint to attempt to snap a picture between each of the 16 individual pieces to be inlayed.

The wood will be purple heart, and maple for the flowers, wenge for the stem, and yard wood for the leaves.

Wish me luck.

post-16319-0-78932300-1429065685_thumb.p

  • Replies 52
  • Views 11.1k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I figured I should finally close this one out. Weekend fishing trip was cancelled so I spent the morning finishing the rose, removing it from the plywood, inlayed it into some hard maple, added th

  • Ooh cooper's got jokes. I'm just hoping you finish your box before your eyes give and dementia takes you. This is going to be a trial run in a piece of birch.  If it doesn't look like a crayola box

  • In my normal jumping around between projects style, here are pieces 10-13 inlayed. One small piece of ppl heart and one more flower turn down in maple and the flower portion will be done. Just 9 more

Posted Images

Ballsey!

Can we expect to see this complete by Friday?

Buenos Suerte as my neighbors say!

  • Author

Ooh cooper's got jokes. I'm just hoping you finish your box before your eyes give and dementia takes you.

This is going to be a trial run in a piece of birch.  If it doesn't look like a crayola box exploded, I'll give it a go on the sapele lid.

Work has unfortunately stalled already. Out of 3 card scrapers, I can find exactly none of them. First petal is in but I tall don't want to sand it down. I feel that by the end, the whole thing would be a divot. .

  • Author

One piece in. A buzzillion more to go. I tan a bit of sandpaper over it by hand. The left side where there are little gaps will be removed for overlay layers.

post-16319-0-27891200-1429077202_thumb.j

post-16319-0-17598400-1429077220_thumb.j

Very cool Brendon!  I look forward to watching this!

As quickly as you breeze thru projects, I can see tis coming together nicely!

  • Author

I haven't yet decided if the leaves will need shaded or not. The wood yard wood I'm using has such an extreme gradient of color in it, I'm pretty sure I'll be able to get a good inner seam line by taking it out of the right spot.

Steve, yard wood is a very rare and mysterious wood. . Aka I had a log in my back yard, don't know what it is, has some nice characteristics. I think it'll fit well.

That's an 8 hour project with an exacto-knife. Router inlay seems insanely complicated to me.

 

Fill it with resin and ground gems.

  • Author

The first one wasn't too difficult. I hogged it out with a 1/8 bit then kissed my line with a 1/16 bit. I definately wish I had better lighting and a magnifier. Them lines get small Fast.

If a hand cut marquetry class ever comes to your town - take the class.

You can do the entire rose with each piece to the tiniest and thinnest detail with an exacto, watered-down glue, and masking tape. Then use the router one time to insert the whole thing into your piece.

Bonus, you can do it on the coffee table while watching a movie

If a hand cut marquetry class ever comes to your town - take the class.

You can do the entire rose with each piece to the tiniest and thinnest detail with an exacto, watered-down glue, and masking tape. Then use the router one time to insert the whole thing into your piece.

Bonus, you can do it on the coffee table while watching a movie

 

Sorry for the hijack - you gotta tell me more.  How do you cut the recess?

  • Author

Sorry for the hijack - you gotta tell me more. How do you cut the recess?

Hijack away, that idea is growing on me. It seems that it would be a ton easier to make the inlay and just fit the pieces to each other. Not a hole you make every time.

Sorry for the hijack - you gotta tell me more.  How do you cut the recess?

Only need one recess, the one for the completed flower. You'd use to router just the one time for that.

All the other pieces would be done exacto-knife marquetry style, then you'd inlay the whole piece into the project once.

Only need one recess, the one for the completed flower. You'd use to router just the one time for that.

All the other pieces would be done exacto-knife marquetry style, then you'd inlay the whole piece into the project once.

 

Ok I think I misunderstood initially.  So you cut the pieces out of thin stock with an xacto knife, fit them together with glue, then just recess the whole thing with a router.

What I'm thinking of it a little different from that thread.

Take a look at Jane's page

http://www.janeburke.com/technique.html

In this case though, once finished, you'd cut out the final design and route it in. Just happens to work well in this case because it's one single connected flower.

Or......since this is for a box, you could just use a background veneer that matches the box and overlay the entire marquetry piece atop that piece of the box.

Or you could just route it all in too. :)

  • Author

All right. 4 more pieces added. Luckily that "sneezing oops" will be laid over. It's really starting to look like something. I'm not sure what but definitely something.

post-16319-0-34254800-1429152918_thumb.j

post-16319-0-08850700-1429152936_thumb.j

post-16319-0-35979400-1429152978_thumb.j

post-16319-0-10061800-1429153009_thumb.j

We'll start guessing and the winner wins...... what?

Good tight lines! Looking good so far.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.