..Kev Posted May 24, 2015 Report Posted May 24, 2015 You'll have a bench top before you know it! Quote
Tom Cancelleri Posted May 24, 2015 Author Report Posted May 24, 2015 Sweet man. Did you find any tricks for ripping those long thin boards down on the band saw? It feels like a 10' board would be super easy to tweak just enough to bring it away from the fence. After many a tweak, I got a good position and feel for the best way to feed them. I feed from about 2 feet from the saw pushing the boards in the direction of a 10 oclock position. This worked pretty well, there's little bits here and there that got some little peaks and valleys, but these are rough rips, and fed through the planer to clean up those edges. Quote
Brendon_t Posted May 24, 2015 Report Posted May 24, 2015 Sweet Tom. I was thinking that a long aux fence waxed up might be helpful. Quote
Coop Posted May 25, 2015 Report Posted May 25, 2015 It's a bird, it's a plane! The only time my Dewalt has been up that high was to wax the table or clean the rollers. That's a hunker! Quote
Tom Cancelleri Posted May 25, 2015 Author Report Posted May 25, 2015 The only time my Dewalt has been up that high was to wax the table or clean the rollers. That a hunker! Yea same here, I thought it looked funny sitting that high. I'm gonna actually wax the table tomorrow, through a quick layer of renaissance wax to slick it up a bit. Had some stickage today in some spots. Quote
Tom Cancelleri Posted May 25, 2015 Author Report Posted May 25, 2015 Nananananananana Batslab! Now to thin the slabs to get the right width. Oh the waste that shall ensue. Quote
Tom Cancelleri Posted May 25, 2015 Author Report Posted May 25, 2015 Sneaking up on that width, little passes at a time. Quote
Coop Posted May 25, 2015 Report Posted May 25, 2015 And the clock on the wall says you're sneaking up on beer time as well. Time for an evaluation! You're making ME tired! Quote
Tom Cancelleri Posted May 25, 2015 Author Report Posted May 25, 2015 Domino mortises in place. Time for glue. Quote
Tom Cancelleri Posted May 25, 2015 Author Report Posted May 25, 2015 Glued and clamped. 1 board was a bit bowed, yay dominoes top the rescue. Pass it through the planer tomorrow. Calling it done for today Quote
shaneymack Posted May 26, 2015 Report Posted May 26, 2015 Wow. Youre really working your butt off. At this pace you should be done in a week or two.... Quote
Tom Cancelleri Posted May 26, 2015 Author Report Posted May 26, 2015 Wow. Youre really working your butt off. At this pace you should be done in a week or two.... I wish, I was off from work all last week, and I decided on Saturday to start working on the bench, as I have been winding down the memorial dog box for my friend. Tomorrow at best I'll get the dog box finished up, and hopefully Wednesday I'll get the front slab out of the clamps. Thursday/Friday/Saturday I'm hoping to finish milling the wood for the back slab and get it glued up, I have the wood for the legs already jointed, need to cut those down to rough length and finish milling them. I don't want to mill everything since I bought 50 or so extra board feet. Quote
shaneymack Posted May 26, 2015 Report Posted May 26, 2015 You're a beast! You must be single or have a real cool chick....lol. So jelous of all the shop time you get. Keep the pics coming its looking great! Quote
Tom Cancelleri Posted May 26, 2015 Author Report Posted May 26, 2015 You're a beast! You must be single or have a real cool chick....lol. So jelous of all the shop time you get. Keep the pics coming its looking great! Both, my chick has her own hobbies, and we see each other a few times a week, usually once on the weekend and once or twice during the week. She lives about 30 miles away, so quick visits aren't easy, and she's got 3 dogs as do I, so we have obligations and responsibilities. Which works for me and my shop time =). She's an awesome artist, paints, draws and such. Quote
shaneymack Posted May 26, 2015 Report Posted May 26, 2015 Both, my chick has her own hobbies, and we see each other a few times a week, usually once on the weekend and once or twice during the week. She lives about 30 miles away, so quick visits aren't easy, and she's got 3 dogs as do I, so we have obligations and responsibilities. Which works for me and my shop time =). She's an awesome artist, paints, draws and such. Wow. If ever you guys get married your going to need a dog park for a back yard, a big pooper scooper and an even bigger vacuum for all hair! I use to have 3 dogs but down to one now. I compensated by having a bunch of kids 4 kids + 1 large hard headed mastiff= busy. Quote
Tom Cancelleri Posted May 27, 2015 Author Report Posted May 27, 2015 Out of the clamps, hit with the cabinet scraper to get some dried glue off. Gonna get a couple of light passes on the jointer before planing to 4" it's 4 3/8 right now. Maybe tomorrow I can get some of the back slab milling done, and rip those huge boards to 5 inches 1 Quote
bgreenb Posted May 27, 2015 Report Posted May 27, 2015 Out of the clamps, hit with the cabinet scraper to get some dried glue off. Gonna get a couple of light passes on the jointer before planing to 4" it's 4 3/8 right now. Maybe tomorrow I can get some of the back slab milling done, and rip those huge boards to 5 inches How wide is your jointer Tom? That slab fits on it? Quote
Tom Cancelleri Posted May 27, 2015 Author Report Posted May 27, 2015 How wide is your jointer Tom? That slab fits on it? I've got an 8" jointer. That slab is 7 13/16 wide. just makes it. The back slab however is a no go. Quote
Jim DaddyO Posted May 27, 2015 Report Posted May 27, 2015 Going to be watching this one. Looks great so far! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.