Popular Post shaneymack Posted August 8, 2015 Popular Post Report Posted August 8, 2015 (edited) Last night i was just finishing up working in the shop. I had one little cut to do and ran over to the miter saw to do it quicky. Never a good thing when dealing with power tools, something I'm normally very aware of. My wife had been asking me for help for a couple minutes and i heard the mayhem of 4 children screaming and whining so i was all stressed out. All to say, just wanted to cut my piece, and do so quicky. So I slapped the piece of walnut on the kapex, made the cut, grabbed it and turned to put it where i needed it and bang! My offcut shot up into the blade and got wedged between the blade and the housing. I pulled the jammed piece out and some broken plastic came out with it. Blade guard didn't work anymore. I was a little bummed out. The lasers were way off and the saw wasn't cutting square anymore. Needlesss to say, off to repair it was going.I went right to the computer and filled out the request for service and within seconds had all the info in my inbox on how to proceed with shipping it along with the UPS waybill. Awesome. There was a phone number on the waybill for the service center so i called it this morning before sending with UPS. I asked the guy if I could bring it myself to bypass wrapping it and shipping it he said sure. The service center is only 100 km's from me. An hour later the guy calls me back and says that if I brought it in the morning he would have his guy fix it right away and I could leave with it. I was amazed.When i arrived there i told the tech what happened and he said no problem and to come back in an hour. He said he would fix everything and recalibrate the saw and lasers. Went to grab a coffee and mooch some free wifi at Tim Hortons. When the hour had passed, I went back to the service center. It was fixed. He changed the entire upper plastic housing, the arm that connects the blade guard and had it all recalibrated. We got to talking and I told him that the tables on the saw were not coplanar out of the box but i figured it wasn't a big deal. He was surprised and said that could actually have been part of the reason for the cutoff shooting up into the blade. So he proceeded to take it all apart again to be able to change the entire base. Fast forward an hour, everything is back together, coplanar and calibrated and he says he is sure my blade has some wobble in it. Goes and grabs a brand new blade and swaps them. Problem solved.So the very, very long story to say that this was probably one of the best customer service experiences of my life. Tool repaired and running better than it did out of the box, with a brand new blade all free of charge and within 24hrs of it breaking!! Festool has a client for life. I will continue to pay the ridiculous price they ask for their tools and do so with a smile. Edited August 8, 2015 by shaneymack 3 Quote
wtnhighlander Posted August 8, 2015 Report Posted August 8, 2015 There had to be some reason they can charge so much up front, I guess this is it! Sounds like a great company to deal with. Quote
Llama Posted August 8, 2015 Report Posted August 8, 2015 That is awesome! How far is 100km's? 2 Quote
Woodenskye Posted August 8, 2015 Report Posted August 8, 2015 That is great service Shane. I see rapid systainer expansion in your near future. Quote
shaneymack Posted August 8, 2015 Author Report Posted August 8, 2015 That is awesome! How far is 100km's? Even though you're probably being a smart ass i will answer anyways. ;) 100kms is 60mph. And before you ask, Tim Hortons is like your dunkin donuts, only the coffee is somewhat drinkable. And yes, Tim Horton was a hockey player... 1 Quote
Llama Posted August 8, 2015 Report Posted August 8, 2015 Smart ass? Who me Yes I was... But, I didn't know the answer. I would have guessed he was a hockey player Quote
shaneymack Posted August 8, 2015 Author Report Posted August 8, 2015 Smart ass? Who me Yes I was... But, I didn't know the answer. I would have guessed he was a hockey player I added the hockey player tidbit so you guys could razz the canuck a little :lol: 1 Quote
Tom Cancelleri Posted August 8, 2015 Report Posted August 8, 2015 Tim Horton's was my breakfast place every morning when I was up in Canada for 5 days. Their stuff is really tasty, much better than Dunkin Donuts. They use real dishes and silverware too. Awesome stuff Shane 1 Quote
..Kev Posted August 8, 2015 Report Posted August 8, 2015 Awesome! I had the issue with the track saw recall and they were awesome! Upgraded my saw from the 55 to the 75 and paid for all the shipping. They really are super at customer service!BTW, I like Tim Horton's! 1 Quote
estesbubba Posted August 8, 2015 Report Posted August 8, 2015 Another company that has great customer service (and Canadian) is Leigh. I had a problem with my D4 and the guy said "even though we have a 5 year warranty, it's essentially lifetime if you don't abuse the jig". Leigh also sets the standard on how woodworking manuals should be written. Quote
shaneymack Posted August 8, 2015 Author Report Posted August 8, 2015 Another company that has great customer service (and Canadian) is Leigh. I had a problem with my D4 and the guy said "even though we have a 5 year warranty, it's essentially lifetime if you don't abuse the jig". Leigh also sets the standard on how woodworking manuals should be written. Mike, I have been trying to decide between the omnijig and the Leigh. What is your experience with the D4? Any experience with the omnijig? Quote
..Kev Posted August 8, 2015 Report Posted August 8, 2015 I've never used the Omnijig but, I do have a D4 and really like it! I haven't had a need for their customer service so, can't comment there either. Quote
shaneymack Posted August 8, 2015 Author Report Posted August 8, 2015 I've never used the Omnijig but, I do have a D4 and really like it! I haven't had a need for their customer service so, can't comment there either. Is setup pretty quick Kev? I hear often that by the time you set one of these things up you could have cut the dovetails by hand. Quote
..Kev Posted August 8, 2015 Report Posted August 8, 2015 Is setup pretty quick Kev? I hear often that by the time you set one of these things up you could have cut the dovetails by hand.Set up is pretty user friendly and quick.The issue is that unless you're using it a lot, when you need it you have to go back to the manual or youtube to refresh your memory. 1 Quote
estesbubba Posted August 8, 2015 Report Posted August 8, 2015 I have the D4 and the newer D4R and D4R Pro improve on it. It does have a little learning curve but having the manual next to you makes each step easy. Like Kev said I actually pull out the manual every time I use the jig just to make sure I don't miss something. The first time you use a bit there will be a little trial and error. Once you get the fit perfect you write all the settings in the manual and next time is easy. Go to their website and check out the manuals and gallery and you'll see what all this jig can do. Get the VRS for stability and dust collection that will works with your Festool. Quote
Tom Cancelleri Posted August 8, 2015 Report Posted August 8, 2015 (edited) I have the D4 and the newer D4R and D4R Pro improve on it. It does have a little learning curve but having the manual next to you makes each step easy. Like Kev said I actually pull out the manual every time I use the jig just to make sure I don't miss something. The first time you use a bit there will be a little trial and error. Once you get the fit perfect you write all the settings in the manual and next time is easy. Go to their website and check out the manuals and gallery and you'll see what all this jig can do. Get the VRS for stability and dust collection that will works with your Festool. Is the d4r really that much better than the d4? Edited August 8, 2015 by Tom Cancelleri Quote
shaneymack Posted August 8, 2015 Author Report Posted August 8, 2015 I have the D4 and the newer D4R and D4R Pro improve on it. It does have a little learning curve but having the manual next to you makes each step easy. Like Kev said I actually pull out the manual every time I use the jig just to make sure I don't miss something. The first time you use a bit there will be a little trial and error. Once you get the fit perfect you write all the settings in the manual and next time is easy. Go to their website and check out the manuals and gallery and you'll see what all this jig can do. Get the VRS for stability and dust collection that will works with your Festool. Thanks Mike. Thats helpful. Quote
estesbubba Posted August 9, 2015 Report Posted August 9, 2015 Is the d4r really that much better than the d4? I think the D4R added cutting half blinds at the same time. You can convert a D4 to do this but I haven't done mine yet. Quote
Eric. Posted August 9, 2015 Report Posted August 9, 2015 Is setup pretty quick Kev? I hear often that by the time you set one of these things up you could have cut the dovetails by hand.This is an argument made mostly by Neanderthals with a grudge against machines. Someone who can hand cut dovetails quickly might be able to finish ONE drawer by the time you're done setting up the jig, but then you're gonna fly past them to the finish line if you have multiple parts to join. By the time you're done with all the drawers for your chest, they'll still be marking their lines.This is especially true if you're an OCD dovetail cutter like me. It's exceptionally gratifying once I'm done, but it takes forever. Fo eva. There's a time and place for both ways of doing it. Depends on the piece. Quote
shaneymack Posted August 9, 2015 Author Report Posted August 9, 2015 This is an argument made mostly by Neanderthals with a grudge against machines. Someone who can hand cut dovetails quickly might be able to finish ONE drawer by the time you're done setting up the jig, but then you're gonna fly past them to the finish line if you have multiple parts to join. By the time you're done with all the drawers for your chest, they'll still be marking their lines.This is especially true if you're an OCD dovetail cutter like me. It's exceptionally gratifying once I'm done, but it takes forever. Fo eva. There's a time and place for both ways of doing it. Depends on the piece. Thanks E. I figured that wasn't true. Quote
Trip Posted August 9, 2015 Report Posted August 9, 2015 (edited) ==>I hear often that by the time you set one of these things up you could have cut the dovetails by handOnly if you're Frank Klausz* *And if you don't know who he is, you should Google him... I believe his current record is a drawer in about 1min 48 seconds. Edited August 9, 2015 by hhh Quote
shaneymack Posted August 9, 2015 Author Report Posted August 9, 2015 ==>I hear often that by the time you set one of these things up you could have cut the dovetails by handOnly if you're Frank Klausz* *And if you don't know who he is, you should Google him... I believe his current record is a drawer in about 1min 48 seconds. Oh ya he is amazing. I am no Frank Klausz. My record for cutting dovetails is 11 hours 48 minutes. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.