Recommended Posts

Posted

I invented a new tool last night.  Behold, the Dust Expeller:

IMG_0685.thumb.JPG.98caf796048ab8b07be91

I was cleaning up a big pile of wenge dust with my dust collector only to turn around and find my dust collector spewing a cloud of black dust ten feet across my shop.  Luckily I was wearing my mask at the time. 

Posted (edited)

And the Lord said, "Let there be Duct Tape”... And He saw that it was good...

 

 

 

Sorry, I haven't completed this morning's caffeine infusion... :)

 

 

 

PS: 3M makes a wide variety of specialty adhesives for all manor of plastics -- even those that "can't be glued", e.x. UHMW, PTFE, Nylon, etc... They have to be purchased from industrial supply houses (maybe McMasterCarr), but you can repair the housing... I've accumulated a fair supply over the years -- the one thing they all have in common is they are known to cause cancer outside of California... Good luck...

Edited by hhh
  • Like 1
Posted

- the one thing they all have in common is they are known to cause cancer outside of California... Good luck...

if it causes cancer outside of California, then it causes cancer, tuberculosis, and HPV inside the state.

Posted

-- the one thing they all have in common is they are known to cause cancer outside of California... Good luck...

I think you have that wrong Trip... I think they cause cancer in California:lol:  Keep pumping that caffeine.

Posted

And the Lord said, "Let there be Duct Tape”... And He saw that it was good...

 

PS: 3M makes a wide variety of specialty adhesives for all manor of plastics -- even those that "can't be glued", e.x. UHMW, PTFE, Nylon, etc... They have to be purchased from industrial supply houses (maybe McMasterCarr), but you can repair the housing... I've accumulated a fair supply over the years -- the one thing they all have in common is they are known to cause cancer outside of California... Good luck...

I would be reluctant to do that, for fear of adding turbulence that would impact on the efficiency of dust collection.

Posted

Btw, I've found the same type of tool in my shop. While carrying out scrap, I guess I hit my DC bag and made a 1-" hole. The next operation I performed was drum sanding some padeuk.. I quickly figured out I was standing in a cloud of red dust... That sucked.

Posted

Btw, I've found the same type of tool in my shop. While carrying out scrap, I guess I hit my DC bag and made a 1-" hole. The next operation I performed was drum sanding some padeuk.. I quickly figured out I was standing in a cloud of red dust... That sucked.

Ew, you win.  Padauk dust is nasty stuff.  Stains everything.   

Posted

==>I think they cause cancer in California:lol:

Round about way of saying, "These are nasty and certainly do cause cancer..."

 

==>for fear of adding turbulence that would impact on the efficiency of dust collection.

The duct tape was a joke... Re-gluing the chips back to the housing should be fine... Assuming he can find the chips...

Posted

==>for fear of adding turbulence that would impact on the efficiency of dust collection.

The duct tape was a joke... Re-gluing the chips back to the housing should be fine... Assuming he can find the chips...

I looked for the chips (and the object that I must have sucked into the impeller to cause the damage in the first place), and no luck.  I assume they are halfway to California by now.  Going to have to get creative with fixing this one.

Posted

Btw, I've found the same type of tool in my shop. While carrying out scrap, I guess I hit my DC bag and made a 1-" hole. The next operation I performed was drum sanding some padeuk.. I quickly figured out I was standing in a cloud of red dust... That sucked.

And blew.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined