Recommended Posts

Posted

got sick and tired of my two bargin bought planes covered in rust. Stainley number 4 and number 7. Been using them a lot, and FL air they get worse monthly. Bit the bulket and took them completely apart. Replaced the black paint with Army Infantry blue, and sanded and polished everything else.  

image.jpg

image.jpg

image.jpg

image.jpg

  • Like 1
Posted

Try some Boeshield T9 or even WD40. Use beeswax on the sole and you'll find the planes easier to push.

Don't stress too much about potential contamination. As long as you don't drench them in grease or engine oil you'll have no contamination problems.

  • Like 1
Posted

got sick and tired of my two bargin bought planes covered in rust. Stainley number 4 and number 7. Been using them a lot, and FL air they get worse monthly. Bit the bulket and took them completely apart. Replaced the black paint with Army Infantry blue, and sanded and polished everything else.  

Looks great!  Would look even better in Red Leg Red.

(Oddly I was both Infantry and field artillery, but I look GREAT in red.) 

Was any "tuning" required on these to make them perform, or are the more vintage ones a better value?

Posted

I apply Camellia oil to my planes to prevent rust. It's available at herbal stores, in small bottles. LN recommends Camellia or Jojoba oils for their planes.

I have a new bottle of Camellia at home for when I start sharpening my planes and chisels.

Jojoba on all of my steel tools.

Isn't Jojoba a ton more expensive?  

"They" say a non-drying oil is an oil with an iodine value of under 115:

https://en.wikipedia.org/wiki/Iodine_value

Looking at that list I'd probably change that to be anything < 95.

 

Posted

I have T-9 for the table saw, but looking for something not as harsh. Maybe will try the T-9 on sides and wax on bottom. If they get a little surface rust I don't care, it is the years of rust that bothers me. And that was how I got them.

As for blades....I hand sharpened them. And they work great as I have 220, 400, 600 dimond stones. They really not stones but the plates with oval holes and plastic on back. Bought a 10" wet stone sharpening machine from grizzly. Can't aford the tormak. Waiting on that grizzly in the mail. Also going to buy a package deal of wet stones  from highland woodworking stone package. The one that goes up to 8000 grit.  It is a 3x stone deal. And then get the MK2 jig from veritas. After that all comes in mail will snap some pics of shavings lol. Pics like that must be porn to some lol. 

Posted

I have a new bottle of Camellia at home for when I start sharpening my planes and chisels.

Isn't Jojoba a ton more expensive?  

 

 

Never really looked.  I have a micro-fiber rag that I keep damp with the oil and wipe it on everything.  Doesn't take but a few drops to recharge the rag every once in a while. 

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 64 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined