Recommended Posts

Posted

Hey folks,

I just joined the forums and thought I would share my most recent project. We moved into a new home this past summer and we’ve been using the backyard a lot. My wife wanted an outdoor table that would seat 4-6 people and I convinced her to let me build it. 

The table is made out of African Mahogany and finished with Epifanes. The original plan was to apply the matte version of Epifanes after the gloss coats, but I liked the gloss more than I thought and decided to leave it.  

All the joinery is mortise and tenon with the exception of the slats. I’m not sure exactly what the proper term for the slats is. They are rabbeted and fit into a grove cut into the middle cross piece and the end pieces. They were without a doubt the biggest challenge/pain with the project. 

This is the first project where I used SketchUp to any significant degree. It really helped me with the slat size. I think if I hadn’t used SketchUp, I would have ended up with a slat size that wouldn’t have looked as nice. 

I built the base to accept an umbrella post and the intention was to drill a hole in the top to help house the pole, but when it came time to drill the hole in the top, I just couldn’t do it. :) Going to try to convince my wife that we can just keep the umbrella in a separate stand. 

A couple asides:

  • The table has yet to make it outdoors. After seeing the table, my wife was really happy with it and decided that she wants matching chairs. I explained that if we put the table outdoors now it would probably end up looking different than the chairs, due to it starting to weather.  It is too big to keep in the shop, so I was going to disassembly it and put it against the wall, but we don’t have anything in our dining room, so we decided to just store it there temporarily. 
  • It was interesting buying the wood. It was nearly 50% cheaper to order the wood online and have it delivered than buying from the local hardwood dealer and they only sell S2S. I bought the stock rough from Steve Wall Lumber and I can’t say enough nice things about dealing with them. At the local hardwood dealer, they make you feel like you are bothering them. The folks at Steve Wall were great to deal with. 

 

Thanks,

Marcus

Table%20and%20Huck.JPG

 

 

Outdoor Table 1.jpg

Outdoor Table 2.jpg

Outdoor Table Sketchup.jpg

  • Like 2
Posted

beautiful table marcus and welcome to the forum, it would be tough for me to move that table outside unless it was under something to keep it protected, weather can be brutal on wood, especially something that nice

Posted

That's a beauty. I wouldn't hesitate to cut the hole for the umbrella, especially since you designed the stetcher so elegantly for it. I've seen many very nice outdoor tables that have them and they still look great.. You can always make a drop in cover to fit the hole as an accessory. 

Posted

Very nice table, Marcus! (cute pup, too)  Is there space between the slats for drainage, or is that just grooves / chamfered edges? I can't tell from the photos.  Also, that appears to be a ring for supporting an umbrella in the bottom stretcher, but no hole in the top???

Posted
3 minutes ago, wtnhighlander said:

Very nice table, Marcus! (cute pup, too)  Is there space between the slats for drainage, or is that just grooves / chamfered edges? I can't tell from the photos.  Also, that appears to be a ring for supporting an umbrella in the bottom stretcher, but no hole in the top???

Ross...he explains why no hole in his OP. Stop just looking at the pictures, this isn't playboy!

  • Like 1
Posted
1 hour ago, wtnhighlander said:

Very nice table, Marcus! (cute pup, too)  Is there space between the slats for drainage, or is that just grooves / chamfered edges? I can't tell from the photos.  Also, that appears to be a ring for supporting an umbrella in the bottom stretcher, but no hole in the top???

There is about an 1/8" gap between all the slats. The small slat size made it difficult to deal with during glue up. what I ended up doing was milling up some small spacers and gluing the slats together in sections of about 8. That made the final top glue up a lot smoother. 

1 hour ago, Janello said:

That's a beauty. I wouldn't hesitate to cut the hole for the umbrella, especially since you designed the stetcher so elegently for it. I've seen many very nice outdoor tables that have them and they still look great.. You can always make a drop in cover to fit the hole as an accessory. 

The hole is definitely coming. I'm kicking myself a little now because it would have been a lot easier to drill it using the drill press before the top was assembled.

Thanks for the kind words! I'm trying to get in the habit of taking more pictures projects, but I always seem to forget. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 52 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined