Recommended Posts

Posted

I think you will be real happy with your choice.  I have the same model but with the 36 inch fence, which is fine for me.  I am real happy with the dust collection on the saw.  The only thing I wish was different on the saw, and this is strictly me, I wish the dust port was on the right hand side of the saw instead of the back.  With a sharp blade it does pretty well on thick (8/4) stock.

Posted

My only wish was that sawstop didn't hack the model and offered the same features on their 30" version. With a small shop that 6" and the extra cost to get the better fence just kicked it out of reach.

Sent from my VS986 using Tapatalk

Posted

 

On 2/13/2016 at 1:35 PM, knotscott said:

That's a great saw, and you got their top fence...plus it won't amputate anything in the event of a mishap.  Congrats!

I just noticed that you are from Rochester too.  What part of town are you in? 

Posted
On 2/20/2016 at 8:27 PM, Dknapp34 said:

 

I just noticed that you are from Rochester too.  What part of town are you in? 

I'm in northern Greece - Off Long Pond Rd up near the Parkway.  You?

Posted
16 hours ago, knotscott said:

I'm in northern Greece - Off Long Pond Rd up near the Parkway.  You?

In Brighton near 12 corners.  Good to see another Rochesterian on the forum!  

Posted

Sawstop was delivered on Saturday.  Took three of us to get it into the basement.  Man that thing is heavy.  I can't imagine having to move the 5hp industrial version.  Spent some time on Sunday getting it set up.  I still have a few things left to do like checking that the blade is parallel to the miter slot and checking the stops on the blade adjustment mechanism, but it's coming along nicely.  It's not in its final resting spot, but here's a pic of it in its current state:

IMG_1019.JPG.647d8f40684864173097a51c2ef

As far as the set-up goes, I have no complaints.  SawStop really put a lot of thought into just about everything.  The packaging is nice.  The instructions are excellent (better, in fact, than anything I've ever had before).  Everything is color coded, and the parts for each step are separated out and well-labeled.  The only hiccup I had was in installing the mobile base, but that was operator error and it didn't take long to fix.  As for the mobile base, it is pretty sweet.  One tap of the foot and the saw lifts up and glides around effortlessly.  Another tap, and it sits solid as a rock on the ground.  The main table and cast iron extension wings were flat and I had no problem getting them attached.  The fence also was easy to install, and man is it solid.  My old saw had a Vega Pro fence and I loved how solid that thing was, but the SawStop fence is even beefier.  And it glides along the rails like butter.  

So that's the good.  As for the bad, there's really only one issue and it's not with the saw itself, but with the extension table.  Installation was pretty easy, but once I got it attached to the fence rails, I've had a heck of a time getting flat.  There is about a 1/8" dip in the middle of the table, which you can kind of see from in this pic:

IMG_1024.JPG.0710d97b9367082e2de4b8081b7

I'm thinking that I may need to jam a 2X4 under the table in the middle to get it propped up so I can crack down the bolts holding the table to the fence rails.  Not sure how else to do it.  Has anyone else had this issue?  The extension table is a little disappointing, given how top-notch the fit an finish is on everything else.  

Overall though, I'm seriously impressed with this saw.

Posted

Congrats on the new saw looking good. I just got my new saw set up as well, after i had everything installed I had a few things left over and then realized there were instructions that came with it. I learned the the extra hardware was just extra. There wasn't any where for it to go anyway all the holes were filled.

I don't know what to tell ya with he extension wing. I bought the 30" rip version PM1000, maybe someone will chime in that knows Table saws better than i do but out there is being perfectly flat that big of a deal?

Posted

Congratulations on the new saw!  She's a beauty.  Hope you get it all dialed in and making sawdust soon.

About the extension table.....I guess they still have yet to fix it.  I bought my PCS about 6 years ago...and I had the same issue with the extension table - a serious sag in the middle.  The bracing underneath was definitely sub-par.  I complained and they shipped me a new table - which is still in the box.  I eventually want to get the shiny black table back on, but already know I'll need to re-do the bracing and framing underneath.  I ended up making a more sturdy extension table with a router lift insert, which has held rock steady for years.

 

Posted
1 hour ago, shaneymack said:

Congrats on the new saw, im sure you will LOVE it ! I remember fiddling with my table as well. I adjusted it the best i could and called it a day. Its never been an issue. 

I'm sure I'll end up doing the same.  Probably doesn't need to be dead flat.  It's just a little disappointing to have the extension table be out-of-whack when everything else is of such high quality, but it's only a minor complaint. 

I can't wait to fire this thing up and make some sawdust!  For the first project, I've got some 8/4 Ipe that I think I'm going to use to make a shelf for the shower.  Should be a good test of what the 1 3/4 hp motor can handle.

Posted

OK, I am going to have to take my extension table off and see what I did wrong because mine is pretty much dead nuts flat and I don't remember having to fuss with it that much during assembly. :D  Sorry.  I guess I got the freak.

Posted
36 minutes ago, Chet K. said:

OK, I am going to have to take my extension table off and see what I did wrong because mine is pretty much dead nuts flat and I don't remember having to fuss with it that much during assembly. :D  Sorry.  I guess I got the freak.

If you want to switch, I'd be happy to...  

Posted

Sawstop was delivered on Saturday.  Took three of us to get it into the basement.  Man that thing is heavy.  I can't imagine having to move the 5hp industrial version.  Spent some time on Sunday getting it set up.  I still have a few things left to do like checking that the blade is parallel to the miter slot and checking the stops on the blade adjustment mechanism, but it's coming along nicely.  It's not in its final resting spot, but here's a pic of it in its current state:

IMG_1019.JPG.647d8f40684864173097a51c2ef6c560.JPG

As far as the set-up goes, I have no complaints.  SawStop really put a lot of thought into just about everything.  The packaging is nice.  The instructions are excellent (better, in fact, than anything I've ever had before).  Everything is color coded, and the parts for each step are separated out and well-labeled.  The only hiccup I had was in installing the mobile base, but that was operator error and it didn't take long to fix.  As for the mobile base, it is pretty sweet.  One tap of the foot and the saw lifts up and glides around effortlessly.  Another tap, and it sits solid as a rock on the ground.  The main table and cast iron extension wings were flat and I had no problem getting them attached.  The fence also was easy to install, and man is it solid.  My old saw had a Vega Pro fence and I loved how solid that thing was, but the SawStop fence is even beefier.  And it glides along the rails like butter.  

So that's the good.  As for the bad, there's really only one issue and it's not with the saw itself, but with the extension table.  Installation was pretty easy, but once I got it attached to the fence rails, I've had a heck of a time getting flat.  There is about a 1/8" dip in the middle of the table, which you can kind of see from in this pic:

IMG_1024.JPG.0710d97b9367082e2de4b8081b781f39.JPG

I'm thinking that I may need to jam a 2X4 under the table in the middle to get it propped up so I can crack down the bolts holding the table to the fence rails.  Not sure how else to do it.  Has anyone else had this issue?  The extension table is a little disappointing, given how top-notch the fit an finish is on everything else.  

Overall though, I'm seriously impressed with this saw.

I wouldn't worry about the extension. The business part is the cast iron around the blade. I have the same wing extension on my Sawstop and it's never affected my cuts.

If anything, ensure the wing doesn't sit proud where it could catch your piece.

Sent from my iPhone using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 67 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined